Provided by: debhelper_11.1.6ubuntu2_all bug

NAME

       debhelper - the debhelper tool suite

SYNOPSIS

       dh_* [-v] [-a] [-i] [--no-act] [-ppackage] [-Npackage] [-Ptmpdir]

DESCRIPTION

       Debhelper is used to help you build a Debian package. The philosophy behind debhelper is
       to provide a collection of small, simple, and easily understood tools that are used in
       debian/rules to automate various common aspects of building a package. This means less
       work for you, the packager.  It also, to some degree means that these tools can be changed
       if Debian policy changes, and packages that use them will require only a rebuild to comply
       with the new policy.

       A typical debian/rules file that uses debhelper will call several debhelper commands in
       sequence, or use dh(1) to automate this process. Examples of rules files that use
       debhelper are in /usr/share/doc/debhelper/examples/

       To create a new Debian package using debhelper, you can just copy one of the sample rules
       files and edit it by hand. Or you can try the dh-make package, which contains a dh_make
       command that partially automates the process. For a more gentle introduction, the maint-
       guide Debian package contains a tutorial about making your first package using debhelper.

       Except where tool explicitly denotes otherwise, all of the debhelper tools assumes that
       they run from root directory of an unpacked source package.  This is so they can locate
       find debian/control and debian/compat when needed.

DEBHELPER COMMANDS

       Here is the list of debhelper commands you can use. See their man pages for additional
       documentation.

       dh_auto_build(1)
           automatically builds a package

       dh_auto_clean(1)
           automatically cleans up after a build

       dh_auto_configure(1)
           automatically configure a package prior to building

       dh_auto_install(1)
           automatically runs make install or similar

       dh_auto_test(1)
           automatically runs a package's test suites

       dh_bugfiles(1)
           install bug reporting customization files into package build directories

       dh_builddeb(1)
           build Debian binary packages

       dh_clean(1)
           clean up package build directories

       dh_compress(1)
           compress files and fix symlinks in package build directories

       dh_dwz(1)
           optimize DWARF debug information in ELF binaries via dwz

       dh_fixperms(1)
           fix permissions of files in package build directories

       dh_gconf(1)
           install GConf defaults files and register schemas

       dh_gencontrol(1)
           generate and install control file

       dh_icons(1)
           Update caches of Freedesktop icons

       dh_install(1)
           install files into package build directories

       dh_installcatalogs(1)
           install and register SGML Catalogs

       dh_installchangelogs(1)
           install changelogs into package build directories

       dh_installcron(1)
           install cron scripts into etc/cron.*

       dh_installdeb(1)
           install files into the DEBIAN directory

       dh_installdebconf(1)
           install files used by debconf in package build directories

       dh_installdirs(1)
           create subdirectories in package build directories

       dh_installdocs(1)
           install documentation into package build directories

       dh_installemacsen(1)
           register an Emacs add on package

       dh_installexamples(1)
           install example files into package build directories

       dh_installgsettings(1)
           install GSettings overrides and set dependencies

       dh_installifupdown(1)
           install if-up and if-down hooks

       dh_installinfo(1)
           install info files

       dh_installinit(1)
           install service init files into package build directories

       dh_installlogcheck(1)
           install logcheck rulefiles into etc/logcheck/

       dh_installlogrotate(1)
           install logrotate config files

       dh_installman(1)
           install man pages into package build directories

       dh_installmenu(1)
           install Debian menu files into package build directories

       dh_installmime(1)
           install mime files into package build directories

       dh_installmodules(1)
           register kernel modules

       dh_installpam(1)
           install pam support files

       dh_installppp(1)
           install ppp ip-up and ip-down files

       dh_installsystemd(1)
           install systemd unit files

       dh_installudev(1)
           install udev rules files

       dh_installwm(1)
           register a window manager

       dh_installxfonts(1)
           register X fonts

       dh_link(1)
           create symlinks in package build directories

       dh_lintian(1)
           install lintian override files into package build directories

       dh_listpackages(1)
           list binary packages debhelper will act on

       dh_makeshlibs(1)
           automatically create shlibs file and call dpkg-gensymbols

       dh_md5sums(1)
           generate DEBIAN/md5sums file

       dh_missing(1)
           check for missing files

       dh_movefiles(1)
           move files out of debian/tmp into subpackages

       dh_perl(1)
           calculates Perl dependencies and cleans up after MakeMaker

       dh_prep(1)
           perform cleanups in preparation for building a binary package

       dh_shlibdeps(1)
           calculate shared library dependencies

       dh_strip(1)
           strip executables, shared libraries, and some static libraries

       dh_systemd_enable(1)
           enable/disable systemd unit files

       dh_systemd_start(1)
           start/stop/restart systemd unit files

       dh_testdir(1)
           test directory before building Debian package

       dh_testroot(1)
           ensure that a package is built with necessary level of root permissions

       dh_ucf(1)
           register configuration files with ucf

       dh_update_autotools_config(1)
           Update autotools config files

       dh_usrlocal(1)
           migrate usr/local directories to maintainer scripts

   Deprecated Commands
       A few debhelper commands are deprecated and should not be used.

       dh_installmanpages(1)
           old-style man page installer (deprecated)

   Other Commands
       If a program's name starts with dh_, and the program is not on the above lists, then it is
       not part of the debhelper package, but it should still work like the other programs
       described on this page.

DEBHELPER CONFIG FILES

       Many debhelper commands make use of files in debian/ to control what they do. Besides the
       common debian/changelog and debian/control, which are in all packages, not just those
       using debhelper, some additional files can be used to configure the behavior of specific
       debhelper commands. These files are typically named debian/package.foo (where package of
       course, is replaced with the package that is being acted on).

       For example, dh_installdocs uses files named debian/package.docs to list the documentation
       files it will install. See the man pages of individual commands for details about the
       names and formats of the files they use.  Generally, these files will list files to act
       on, one file per line. Some programs in debhelper use pairs of files and destinations or
       slightly more complicated formats.

       Note for the first (or only) binary package listed in debian/control, debhelper will use
       debian/foo when there's no debian/package.foo file.

       In some rare cases, you may want to have different versions of these files for different
       architectures or OSes. If files named debian/package.foo.ARCH or debian/package.foo.OS
       exist, where ARCH and OS are the same as the output of "dpkg-architecture -qDEB_HOST_ARCH"
       / "dpkg-architecture -qDEB_HOST_ARCH_OS", then they will be used in preference to other,
       more general files.

       Mostly, these config files are used to specify lists of various types of files.
       Documentation or example files to install, files to move, and so on.  When appropriate, in
       cases like these, you can use standard shell wildcard characters (? and * and [..]
       character classes) in the files.  You can also put comments in these files; lines
       beginning with # are ignored.

       The syntax of these files is intentionally kept very simple to make them easy to read,
       understand, and modify. If you prefer power and complexity, you can make the file
       executable, and write a program that outputs whatever content is appropriate for a given
       situation. When you do so, the output is not further processed to expand wildcards or
       strip comments.

SHARED DEBHELPER OPTIONS

       The following command line options are supported by all debhelper programs.

       -v, --verbose
           Verbose mode: show all commands that modify the package build directory.

       --no-act
           Do not really do anything. If used with -v, the result is that the command will output
           what it would have done.

       -a, --arch
           Act on architecture dependent packages that should be built for the DEB_HOST_ARCH
           architecture.

       -i, --indep
           Act on all architecture independent packages.

       -ppackage, --package=package
           Act on the package named package. This option may be specified multiple times to make
           debhelper operate on a given set of packages.

       -s, --same-arch
           Deprecated alias of -a.

           This option is removed in compat 12.

       -Npackage, --no-package=package
           Do not act on the specified package even if an -a, -i, or -p option lists the package
           as one that should be acted on.

       --remaining-packages
           Do not act on the packages which have already been acted on by this debhelper command
           earlier (i.e. if the command is present in the package debhelper log).  For example,
           if you need to call the command with special options only for a couple of binary
           packages, pass this option to the last call of the command to process the rest of
           packages with default settings.

       --ignore=file
           Ignore the specified file. This can be used if debian/ contains a debhelper config
           file that a debhelper command should not act on. Note that debian/compat,
           debian/control, and debian/changelog can't be ignored, but then, there should never be
           a reason to ignore those files.

           For example, if upstream ships a debian/init that you don't want dh_installinit to
           install, use --ignore=debian/init

       -Ptmpdir, --tmpdir=tmpdir
           Use tmpdir for package build directory. The default is debian/package

       --mainpackage=package
           This little-used option changes the package which debhelper considers the "main
           package", that is, the first one listed in debian/control, and the one for which
           debian/foo files can be used instead of the usual debian/package.foo files.

       -O=option|bundle
           This is used by dh(1) when passing user-specified options to all the commands it runs.
           If the command supports the specified option or option bundle, it will take effect. If
           the command does not support the option (or any part of an option bundle), it will be
           ignored.

COMMON DEBHELPER OPTIONS

       The following command line options are supported by some debhelper programs.  See the man
       page of each program for a complete explanation of what each option does.

       -n  Do not modify postinst, postrm, etc. scripts.

       -Xitem, --exclude=item
           Exclude an item from processing. This option may be used multiple times, to exclude
           more than one thing. The \fIitem\fR is typically part of a filename, and any file
           containing the specified text will be excluded.

       -A, --all
           Makes files or other items that are specified on the command line take effect in ALL
           packages acted on, not just the first.

BUILD SYSTEM OPTIONS

       The following command line options are supported by all of the dh_auto_* debhelper
       programs. These programs support a variety of build systems, and normally heuristically
       determine which to use, and how to use them.  You can use these command line options to
       override the default behavior.  Typically these are passed to dh(1), which then passes
       them to all the dh_auto_* programs.

       -Sbuildsystem, --buildsystem=buildsystem
           Force use of the specified buildsystem, instead of trying to auto-select one which
           might be applicable for the package.

       -Ddirectory, --sourcedirectory=directory
           Assume that the original package source tree is at the specified directory rather than
           the top level directory of the Debian source package tree.

       -B[directory], --builddirectory=[directory]
           Enable out of source building and use the specified directory as the build directory.
           If directory parameter is omitted, a default build directory will be chosen.

           If this option is not specified, building will be done in source by default unless the
           build system requires or prefers out of source tree building.  In such a case, the
           default build directory will be used even if --builddirectory is not specified.

           If the build system prefers out of source tree building but still allows in source
           building, the latter can be re-enabled by passing a build directory path that is the
           same as the source directory path.

       --parallel, --no-parallel
           Control whether parallel builds should be used if underlying build system supports
           them.  The number of parallel jobs is controlled by the DEB_BUILD_OPTIONS environment
           variable ("Debian Policy, section 4.9.1") at build time. It might also be subject to a
           build system specific limit.

           If neither option is specified, debhelper currently defaults to --parallel in compat
           10 (or later) and --no-parallel otherwise.

           As an optimization, dh will try to avoid passing these options to subprocesses, if
           they are unnecessary and the only options passed.  Notably this happens when
           DEB_BUILD_OPTIONS does not have a parallel parameter (or its value is 1).

       --max-parallel=maximum
           This option implies --parallel and allows further limiting the number of jobs that can
           be used in a parallel build. If the package build is known to only work with certain
           levels of concurrency, you can set this to the maximum level that is known to work, or
           that you wish to support.

           Notably, setting the maximum to 1 is effectively the same as using --no-parallel.

       --list, -l
           List all build systems supported by debhelper on this system. The list includes both
           default and third party build systems (marked as such). Also shows which build system
           would be automatically selected, or which one is manually specified with the
           --buildsystem option.

COMPATIBILITY LEVELS

       From time to time, major non-backwards-compatible changes need to be made to debhelper, to
       keep it clean and well-designed as needs change and its author gains more experience. To
       prevent such major changes from breaking existing packages, the concept of debhelper
       compatibility levels was introduced. You must tell debhelper which compatibility level it
       should use, and it modifies its behavior in various ways.  The compatibility level is
       specified in the debian/compat file and the file must be present.

       Tell debhelper what compatibility level to use by writing a number to debian/compat. For
       example, to use v11 mode:

         % echo 11 > debian/compat

       Your package will also need a versioned build dependency on a version of debhelper equal
       to (or greater than) the compatibility level your package uses. So for compatibility level
       11, ensure debian/control has:

         Build-Depends: debhelper (>= 11)

       Unless otherwise indicated, all debhelper documentation assumes that you are using the
       most recent compatibility level, and in most cases does not indicate if the behavior is
       different in an earlier compatibility level, so if you are not using the most recent
       compatibility level, you're advised to read below for notes about what is different in
       earlier compatibility levels.

   Supported compatibility levels
       These are the available compatibility levels:

       v5  This is the lowest supported compatibility level.

           If you are upgrading from an earlier compatibility level, please review
           debhelper-obsolete-compat(7).

           This mode is deprecated.

       v6  Changes from v5 are:

           -       Commands that generate maintainer script fragments will order the fragments in
                   reverse order for the prerm and postrm scripts.

           -       dh_installwm will install a slave manpage link for x-window-manager.1.gz, if
                   it sees the man page in usr/share/man/man1 in the package build directory.

           -       dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE,
                   if it was set to a list of things to exclude, such as CVS:.svn:.git. Now it
                   does.

           -       dh_installman allows overwriting existing man pages in the package build
                   directory. In previous compatibility levels it silently refuses to do this.

           This mode is deprecated.

       v7  Changes from v6 are:

           -       dh_install, will fall back to looking for files in debian/tmp if it doesn't
                   find them in the current directory (or wherever you tell it look using
                   --sourcedir). This allows dh_install to interoperate with dh_auto_install,
                   which installs to debian/tmp, without needing any special parameters.

           -       dh_clean will read debian/clean and delete files listed there.

           -       dh_clean will delete toplevel *-stamp files.

           -       dh_installchangelogs will guess at what file is the upstream changelog if none
                   is specified.

           This mode is deprecated.

       v8  Changes from v7 are:

           -       Commands will fail rather than warning when they are passed unknown options.

           -       dh_makeshlibs will run dpkg-gensymbols on all shared libraries that it
                   generates shlibs files for. So -X can be used to exclude libraries.  Also,
                   libraries in unusual locations that dpkg-gensymbols would not have processed
                   before will be passed to it, a behavior change that can cause some packages to
                   fail to build.

           -       dh requires the sequence to run be specified as the first parameter, and any
                   switches come after it. Ie, use "dh $@ --foo", not "dh --foo $@".

           -       dh_auto_* prefer to use Perl's Module::Build in preference to Makefile.PL.

           This mode is deprecated.

       v9  Changes from v8 are:

           -       Multiarch support. In particular, dh_auto_configure passes multiarch
                   directories to autoconf in --libdir and --libexecdir.

           -       dh is aware of the usual dependencies between targets in debian/rules.  So,
                   "dh binary" will run any build, build-arch, build-indep, install, etc targets
                   that exist in the rules file. There's no need to define an explicit binary
                   target with explicit dependencies on the other targets.

           -       dh_strip compresses debugging symbol files to reduce the installed size of
                   -dbg packages.

           -       dh_auto_configure does not include the source package name in --libexecdir
                   when using autoconf.

           -       dh does not default to enabling --with=python-support

                   (Obsolete: As the dh_pysupport tool was removed from Debian stretch.  Since
                   debhelper/10.3, dh no longer enables this sequence add-on regardless of compat
                   level)

           -       All of the dh_auto_* debhelper programs and dh set environment variables
                   listed by dpkg-buildflags, unless they are already set.

           -       dh_auto_configure passes dpkg-buildflags CFLAGS, CPPFLAGS, and LDFLAGS to perl
                   Makefile.PL and Build.PL

           -       dh_strip puts separated debug symbols in a location based on their build-id.

           -       Executable debhelper config files are run and their output used as the
                   configuration.

       v10 Changes from v9 are:

           -       dh_installinit will no longer install a file named debian/package as an init
                   script.

           -       dh_installdocs will error out if it detects links created with --link-doc
                   between packages of architecture "all" and non-"all" as it breaks binNMUs.

           -       dh no longer creates the package build directory when skipping running
                   debhelper commands. This will not affect packages that only build with
                   debhelper commands, but it may expose bugs in commands not included in
                   debhelper.

           -       dh_installdeb no longer installs a maintainer-provided debian/package.shlibs
                   file.  This is now done by dh_makeshlibs instead.

           -       dh_installwm refuses to create a broken package if no man page can be found
                   (required to register for the x-window-manager alternative).

           -       Debhelper will default to --parallel for all buildsystems that support
                   parallel building.  This can be disabled by using either --no-parallel or
                   passing --max-parallel with a value of 1.

           -       The dh command will not accept any of the deprecated "manual sequence control"
                   parameters (--before, --after, etc.).  Please use override targets instead.

           -       The dh command will no longer use log files to track which commands have been
                   run.  The dh command still keeps track of whether it already ran the "build"
                   sequence and skip it if it did.

                   The main effects of this are:

                   -   With this, it is now easier to debug the install or/and binary sequences
                       because they can now trivially be re-run (without having to do a full
                       "clean and rebuild" cycle)

                   -   The main caveat is that dh_* now only keeps track of what happened in a
                       single override target.  When all the calls to a given dh_cmd command
                       happens in the same override target everything will work as before.

                       Example of where it can go wrong:

                         override_dh_foo:
                           dh_foo -pmy-pkg

                         override_dh_bar:
                           dh_bar
                           dh_foo --remaining

                       In this case, the call to dh_foo --remaining will also include my-pkg,
                       since dh_foo -pmy-pkg was run in a separate override target.  This issue
                       is not limited to --remaining, but also includes -a, -i, etc.

           -       The dh_installdeb command now shell-escapes the lines in the maintscript
                   config file.  This was the original intent but it did not work properly and
                   packages have begun to rely on the incomplete shell escaping (e.g. quoting
                   file names).

           -       The dh_installinit command now defaults to --restart-after-upgrade.  For
                   packages needing the previous behaviour, please use
                   --no-restart-after-upgrade.

           -       The autoreconf sequence is now enabled by default.  Please pass --without
                   autoreconf to dh if this is not desirable for a given package

           -       The systemd sequence is now enabled by default.  Please pass --without systemd
                   to dh if this is not desirable for a given package.

       v11 This is the recommended mode of operation.

           Changes from v10 are:

           -       dh_installinit no longer installs service or tmpfile files, nor generates
                   maintainer scripts for those files.  Please use the new dh_installsystemd
                   helper.

           -       The dh_systemd_enable and dh_systemd_start helpers have been replaced by the
                   new dh_installsystemd helper.  For the same reason, the systemd sequence for
                   dh has also been removed.  If you need to disable the dh_installsystemd helper
                   tool, please use an empty override target.

                   Please note that the dh_installsystemd tool has a slightly different behaviour
                   in some cases (e.g. when using the --name parameter).

           -       dh_installdirs no longer creates debian/package directories unless explicitly
                   requested (or it has to create a subdirectory in it).

                   The vast majority of all packages will be unaffected by this change.

           -       The makefile buildsystem now passes INSTALL=install --strip-program=true to
                   make(1).  Derivative buildsystems (e.g. configure or cmake) are unaffected by
                   this change.

           -       The autoconf buildsystem now passes --runstatedir=/run to ./configure.

           -       The cmake buildsystem now passes -DCMAKE_INSTALL_RUNSTATEDIR=/run to cmake(1).

           -       dh_installman will now prefer detecting the language from the path name rather
                   than the extension.

           -       dh_auto_install will now only create the destination directory it needs.
                   Previously, it would create the package build directory for all packages.
                   This will not affect packages that only build with debhelper commands, but it
                   may expose bugs in commands not included in debhelper.

           -       The helpers dh_installdocs, dh_installexamples, dh_installinfo, and
                   dh_installman now error out if their config has a pattern that does not match
                   anything or reference a path that does not exist.

                   Known exceptions include building with the nodoc profile, where the above
                   tools will silently permit failed matches where the patterns are used to
                   specify documentation.

           -       The helpers dh_installdocs, dh_installexamples, dh_installinfo, and
                   dh_installman now accept the parameter --sourcedir with same meaning as
                   dh_install. Furthermore, they now also fall back to debian/tmp like
                   dh_install.

                   Migration note: A bug in debhelper 11 up to 11.1.5 made dh_installinfo
                   incorrectly ignore --sourcedir.

           -       The perl-makemaker and perl-build build systems no longer pass -I. to perl.
                   Packages that still need this behaviour can emulate it by using the PERL5LIB
                   environment variable.  E.g. by adding export PERL5LIB=. in their debian/rules
                   file (or similar).

           -       The PERL_USE_UNSAFE_INC environment variable is no longer set by dh or any of
                   the dh_auto_* tools.  It was added as a temporary work around to avoid a lot
                   of packages failing to build at the same time.

                   Note this item will eventually become obsolete as upstream intends to drop
                   support for the PERL_USE_UNSAFE_INC environment variable.  When perl drops
                   support for it, then this variable will be removed retroactively from existing
                   compat levels as well.

           -       The dh_makeshlibs helper will now exit with an error if objdump returns a non-
                   zero exit from analysing a given file.

           -       The dh_installdocs and dh_installexamples tools will now attempt to guess the
                   "main package" for a given documentation package (e.g. pkg-doc will have pkg
                   as main package if the latter exists).  If a main package is found, most of
                   the documentation will be installed into /usr/share/doc/main-pkg by default as
                   recommended by Debian policy ยง12.3 since version 3.9.7.  Notable exceptions
                   include the copyright file and changelog files.

                   The --doc-main-package option can be used when the auto-detection is
                   insufficient.

           -       The dh_strip and dh_shlibdeps tools no longer uses filename patterns to
                   determine which files to process.  Instead, they open the file and look for an
                   ELF header to determine if a given file is an shared object or an ELF
                   executable.

                   This change may cause the tools to process more files than previously.

       v12 This compatibility level is still open for development; use with caution.

           Changes from v11 are:

           -       The -s (--same-arch) option is removed.  Please use -a (--arch) instead.

           -       Invoking dh_clean -k now causes an error instead of a deprecation warning.

           -       The --no-restart-on-upgrade option in dh_installinit has been removed.  Please
                   use the new name --no-stop-on-upgrade

           -       There was a bug in the doit (and similar) functions from
                   Debian::Debhelper::Dh_Lib that made them spawn a shell in one particular
                   circumstance.  This bug is now removed and will cause helpers that rely on the
                   bug to fail with a "command not found"-error.

           -       The --list-missing and --fail-missing in dh_install has been removed.  Please
                   use dh_missing and its corresponding options, which can also see the files
                   installed by other helpers.

           -       The dh_installinit helper no longer installs configuration for the upstart
                   init system.  Instead, it will abort the build if it finds an old upstart
                   configuration file.  The error is there to remind the package maintainer to
                   ensure the proper removal of the conffiles shipped in previous versions of the
                   package (if any).

           -       The dh_installdeb tool will do basic validation of some
                   dpkg-maintscript-helper(1) commands and will error out if the commands appear
                   to be invalid.

           -       The dh_missing tool will now default to --list-missing.

           -       The dh_makeshlibs tool will now only pass libraries to dpkg-gensymbols(1) if
                   the ELF binary has a SONAME (containing ".so").

           -       The dh_compress tool no longer compresses examples (i.e. anything installed in
                   </usr/share/doc/package/examples>.)

NOTES

   Multiple binary package support
       If your source package generates more than one binary package, debhelper programs will
       default to acting on all binary packages when run. If your source package happens to
       generate one architecture dependent package, and another architecture independent package,
       this is not the correct behavior, because you need to generate the architecture dependent
       packages in the binary-arch debian/rules target, and the architecture independent packages
       in the binary-indep debian/rules target.

       To facilitate this, as well as give you more control over which packages are acted on by
       debhelper programs, all debhelper programs accept the -a, -i, -p, and -s parameters. These
       parameters are cumulative.  If none are given, debhelper programs default to acting on all
       packages listed in the control file, with the exceptions below.

       First, any package whose Architecture field in debian/control does not match the
       DEB_HOST_ARCH architecture will be excluded ("Debian Policy, section 5.6.8").

       Also, some additional packages may be excluded based on the contents of the
       DEB_BUILD_PROFILES environment variable and Build-Profiles fields in binary package
       stanzas in debian/control, according to the draft policy at
       <https://wiki.debian.org/BuildProfileSpec>.

       Interaction between package selections and Build-Profiles

       Build-Profiles affect which packages are included in the package selections mechanisms in
       debhelper.  Generally, the package selections are described from the assumption that all
       packages are enabled.  This section describes how the selections react when a package is
       disabled due to the active Build-Profiles (or lack of active Build-Profiles).

       -a/--arch, -i/--indep OR no selection options (a raw "dh_X" call)
           The package disabled by Build-Profiles is silently excluded from the selection.

           Note you will receive a warning if all packages related to these selections are
           disabled.  In that case, it generally does not make sense to do the build in the first
           place.

       -N package / --no-package package
           The option is accepted and effectively does nothing.

       -p package / --package package
           The option is accepted, but debhelper will not act on the package.

       Note that it does not matter whether a package is enabled or disabled by default.

   Automatic generation of Debian install scripts
       Some debhelper commands will automatically generate parts of Debian maintainer scripts. If
       you want these automatically generated things included in your existing Debian maintainer
       scripts, then you need to add #DEBHELPER# to your scripts, in the place the code should be
       added.  #DEBHELPER# will be replaced by any auto-generated code when you run
       dh_installdeb.

       If a script does not exist at all and debhelper needs to add something to it, then
       debhelper will create the complete script.

       All debhelper commands that automatically generate code in this way let it be disabled by
       the -n parameter (see above).

       Note that the inserted code will be shell code, so you cannot directly use it in a Perl
       script. If you would like to embed it into a Perl script, here is one way to do that (note
       that I made sure that $1, $2, etc are set with the set command):

         my $temp="set -e\nset -- @ARGV\n" . << 'EOF';
         #DEBHELPER#
         EOF
         if (system($temp)) {
            my $exit_code = ($? >> 8) & 0xff;
            my $signal = $? & 0x7f;
            if ($exit_code) {
                die("The debhelper script failed with error code: ${exit_code}");
            } else {
                die("The debhelper script was killed by signal: ${signal}");
            }
         }

   Automatic generation of miscellaneous dependencies.
       Some debhelper commands may make the generated package need to depend on some other
       packages. For example, if you use dh_installdebconf(1), your package will generally need
       to depend on debconf. Or if you use dh_installxfonts(1), your package will generally need
       to depend on a particular version of xutils. Keeping track of these miscellaneous
       dependencies can be annoying since they are dependent on how debhelper does things, so
       debhelper offers a way to automate it.

       All commands of this type, besides documenting what dependencies may be needed on their
       man pages, will automatically generate a substvar called ${misc:Depends}. If you put that
       token into your debian/control file, it will be expanded to the dependencies debhelper
       figures you need.

       This is entirely independent of the standard ${shlibs:Depends} generated by
       dh_makeshlibs(1), and the ${perl:Depends} generated by dh_perl(1).  You can choose not to
       use any of these, if debhelper's guesses don't match reality.

   Package build directories
       By default, all debhelper programs assume that the temporary directory used for assembling
       the tree of files in a package is debian/package.

       Sometimes, you might want to use some other temporary directory. This is supported by the
       -P flag. For example, "dh_installdocs -Pdebian/tmp", will use debian/tmp as the temporary
       directory. Note that if you use -P, the debhelper programs can only be acting on a single
       package at a time. So if you have a package that builds many binary packages, you will
       need to also use the -p flag to specify which binary package the debhelper program will
       act on.

   udebs
       Debhelper includes support for udebs. To create a udeb with debhelper, add "Package-Type:
       udeb" to the package's stanza in debian/control.  Debhelper will try to create udebs that
       comply with debian-installer policy, by making the generated package files end in .udeb,
       not installing any documentation into a udeb, skipping over preinst, postrm, prerm, and
       config scripts, etc.

ENVIRONMENT

       The following environment variables can influence the behavior of debhelper.  It is
       important to note that these must be actual environment variables in order to function
       properly (not simply Makefile variables). To specify them properly in debian/rules, be
       sure to "export" them. For example, "export DH_VERBOSE".

       DH_VERBOSE
           Set to 1 to enable verbose mode. Debhelper will output every command it runs. Also
           enables verbose build logs for some build systems like autoconf.

       DH_QUIET
           Set to 1 to enable quiet mode. Debhelper will not output commands calling the upstream
           build system nor will dh print which subcommands are called and depending on the
           upstream build system might make that more quiet, too.  This makes it easier to spot
           important messages but makes the output quite useless as buildd log.  Ignored if
           DH_VERBOSE is also set.

       DH_COMPAT
           Temporarily specifies what compatibility level debhelper should run at, overriding any
           value in debian/compat.

       DH_NO_ACT
           Set to 1 to enable no-act mode.

       DH_OPTIONS
           Anything in this variable will be prepended to the command line arguments of all
           debhelper commands.

           When using dh(1), it can be passed options that will be passed on to each debhelper
           command, which is generally better than using DH_OPTIONS.

       DH_ALWAYS_EXCLUDE
           If set, this adds the value the variable is set to to the -X options of all commands
           that support the -X option. Moreover, dh_builddeb will rm -rf anything that matches
           the value in your package build tree.

           This can be useful if you are doing a build from a CVS source tree, in which case
           setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories from sneaking into the
           package you build. Or, if a package has a source tarball that (unwisely) includes CVS
           directories, you might want to export DH_ALWAYS_EXCLUDE=CVS in debian/rules, to make
           it take effect wherever your package is built.

           Multiple things to exclude can be separated with colons, as in
           DH_ALWAYS_EXCLUDE=CVS:.svn

       DH_EXTRA_ADDONS
           If set, this adds the specified dh addons to be run in the appropriate places in the
           sequence of commands. This is equivalent to specifying the addon to run with the
           --with flag in the debian/rules file. Any --without calls specifying an addon in this
           environment variable will not be run.

           This is intended to be used by downstreams or specific local configurations that
           require a debhelper addon to be run during multiple builds without having to patch a
           large number of rules file. If at all possible, this should be avoided in favor of a
           --with flag in the rules file.

SEE ALSO

       /usr/share/doc/debhelper/examples/
           A set of example debian/rules files that use debhelper.

       <http://joeyh.name/code/debhelper/>
           Debhelper web site.

AUTHOR

       Joey Hess <joeyh@debian.org>