Provided by: lvm2_2.02.176-4.1ubuntu3_amd64 bug

NAME

       pvck - Check the consistency of physical volume(s)

SYNOPSIS

       pvck position_args
           [ option_args ]

DESCRIPTION

       pvck checks the LVM metadata for consistency on PVs.

USAGE

       pvck PV ...
           [    --labelsector Number ]
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --longhelp ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf settings.  The String arg
              uses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
              to the log file and/or syslog (if configured).

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       -h|--help
              Display help text.

       --labelsector Number
              By default the PV is labelled with an LVM2 identifier in its second sector (sector
              1). This lets you use a different sector near the start of the disk (between 0 and
              3 inclusive - see LABEL_SCAN_SECTORS in the source). Use with care.

       --longhelp
              Display long help text.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by
              disabling all metadata writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage operations if a
              tool relies on reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       PV
              Physical Volume name, a device path under /dev.   For  commands  managing  physical
              extents,  a  PV  positional  arg  generally accepts a suffix indicating a range (or
              multiple ranges) of physical extents (PEs).  When  the  first  PE  is  omitted,  it
              defaults to the start of the device, and when the last PE is omitted it defaults to
              end.  Start and end  range  (inclusive):  PV[:PE-PE]...   Start  and  length  range
              (counting from 0): PV[:PE+PE]...

       String
              See the option description for information about the string content.

       Size[UNIT]
              Size  is  an  input  number  that accepts an optional unit.  Input units are always
              treated as base two values, regardless of capitalization, e.g.  'k'  and  'K'  both
              refer  to  1024.  The default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is
              sectors  of 512 bytes, k|K is kilobytes, m|M is megabytes, g|G is gigabytes, t|T is
              terabytes, p|P is petabytes, e|E is exabytes.  (This should not  be  confused  with
              the output control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See  lvm(8)  for  information  about  environment  variables  used  by  lvm.  For example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

EXAMPLES

       If the partition table is corrupted or lost on /dev/sda, and you suspect there was an  LVM
       partition  at  approximately  100 MiB, then this area of the disk can be scanned using the
       --labelsector parameter with a value of 204800 (100 * 1024 * 1024 / 512 = 204800).
       pvck --labelsector 204800 /dev/sda

SEE ALSO

       lvm(8) lvm.conf(5) lvmconfig(8)

       pvchange(8) pvck(8) pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8)  pvresize(8)  pvs(8)
       pvscan(8)

       vgcfgbackup(8)  vgcfgrestore(8)  vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8)
       vgexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8)  vgmknodes(8)  vgreduce(8)
       vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)

       lvcreate(8)  lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8)  lvreduce(8) lvremove(8)
       lvrename(8) lvresize(8) lvs(8) lvscan(8)

       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)

       dmeventd(8)  lvmetad(8)  lvmpolld(8)  lvmlockd(8)   lvmlockctl(8)   clvmd(8)   cmirrord(8)
       lvmdbusd(8)

       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)