Provided by: alsa-tools-gui_1.1.7-1ubuntu1_amd64 bug

NAME

       envy24control - GUI control tool for Envy24 (ice1712) based soundcards, under ALSA.

SYNOPSIS

       envy24control  [-c card-number] [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max
       8] [-p 0-8] [-s 0-2] [-f <profiles file name>] [-v] [<profile number>|<profile name>]  [-m
       midi-channel] [-M] [-w window-width] [-t 0-9]

DESCRIPTION

       envy24control  allows  control  of  the  digital  mixer,  channel gains and other hardware
       settings for sound cards based on the ice1712 chipset (Midiman Delta series, Terratec  EWS
       and EWX series). It also displays a level meter for each input and output channel.

INVOKING

       envy24control  [-c card-number] [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max
       8] [-p 0-8] [-s 0-2] [-f <profiles file name>] [-v] [<profile number>|<profile name>]  [-m
       midi-channel] [-M] [-w window-width] [-t 0-9]

       If no control-name is given, then the first sound card is used.

   Options
       -c card-number
              Use  the  card  specified  by  card-number  rather  than  the  first card.  This is
              equivalent with -Dhw:n option where n is the card number.

       -D control-name
              Use the card specified by control-name rather than the first  card,  normally  this
              will  be  of  the  form hw:n where n is the sound card number (zero-based). This is
              only needed if you have more than one Envy24-based card or if your Envy24  card  is
              not configured as the first card in your ALSA driver setup.

       -o outputs
              Limit  number  of analog line outputs to display.  Default is the number of DACs in
              the driver specification. Maximum is 8.  The number of analog output lines can only
              be reduced from the available number of output lines.

       -i inputs
              Limit  number  of  analog line inputs to display.  Default is the number of ADCs in
              the driver specification. Maximum is 8.  The number of analog input lines can  only
              be reduced from the available number of input lines.

       -p pcm outputs
              Limit number of PCM outputs to display.  Default is 8.

       -s spdif inputs/outputs
              Limit number of SPDIF inputs/outputs to display.  Default is 2.

       -f name and path of the profiles file name.
              From/to  this  file  will envy24control read/write the alsactl settings.  If is not
              given  DEFAULT_PROFILERC  or  for  restore  if  DEFAULT_PROFILERC  doesn't   exists
              SYS_PROFILERC will be used.

       -v view spdif playback channels in the mixer.
              It is not possible to manage something (muting, volume levels).  It is only to view
              the levelmeters.  Default is no view of spdif playback channels in the mixer.

       -m midi-channel
              Use MIDI  controller  values  to  control  the  Faders  in  the  mixer  view.   The
              application  will react to controllers on channel midi-channel and send controllers
              on this channel when the user moves the GUI sliders.

       -M     Use an enhanced mapping from midi controller values to db sliders.

       -w window-width
              Specify the initial width of the envy24control window.  Using window-width  in  the
              range  0-20  specifies  approx  number  of  mixer channels visible.  Values >20 are
              interpreted as screen pixels.

       -t tall-equal mixer heights
              Using -t 1 enlarges the channel mixers to the same height  as  the  digital  mixer.
              With  values  >1  the  height  of  all  mixers is increased in stages.  -t 0 is the
              default, set for minimum window height.

SEE ALSO

        alsamixer(1), amixer(1), gamix(1)

AUTHOR

       envy24control is  by Jaroslav Kysela <perex@perex.cz> This document  is  by  James  Tappin
       <james@xena.uklinux.net>.   Updated by Dirk Kalis <dirk.kalis@t-online.de>.  Options-w and
       -t added Alan Horstmann <gineera@aspect135.co.uk>

                                           30 July 2005                          envy24control(1)