Provided by: xpdf_3.04-13ubuntu4_amd64 bug

NAME

       xpdfrc - configuration file for Xpdf tools (version 3.04)

DESCRIPTION

       All  of  the  Xpdf  tools read a single configuration file.  If you have a .xpdfrc file in
       your home directory, it will be read.  Otherwise, a system-wide configuration file will be
       read  from  /etc/xpdf/xpdfrc,  if  it exists.  (This is its default location; depending on
       build options, it may be placed elsewhere.)  On Win32 systems, the xpdfrc file  should  be
       placed in the same directory as the executables.

       The  xpdfrc file consists of a series of configuration options, one per line.  Blank lines
       and lines starting with a ´#' (comments) are ignored.

       Arguments may be quoted, using  "double-quote"  characters,  e.g.,  for  file  names  that
       contain spaces.

       The  following  sections  list  all  of  the configuration options, sorted into functional
       groups.  There is an examples section at the end.

       Note that all settings are case-sensitive; in particular, boolean options  are  "yes"  and
       "no" (rather than "Yes" or "No").

INCLUDE FILES

       include config-file
              Includes  the specified config file.  The effect of this is equivalent to inserting
              the contents of config-file directly into the parent config file in  place  of  the
              include command.  Config files can be nested arbitrarily deeply.

CHARACTER MAPPING

       nameToUnicode map-file
              Specifies a file with the mapping from character names to Unicode.  This is used to
              handle PDF fonts that have valid encodings but no ToUnicode entry.  Each line of  a
              nameToUnicode file looks like this:

                   hex-string name

              The   hex-string   is  the  Unicode  (UCS-2)  character  index,  and  name  is  the
              corresponding character name.  Multiple nameToUnicode  files  can  be  used;  if  a
              character  name  is  given  more  than once, the code in the last specified file is
              used.  There is a built-in default nameToUnicode table with all of Adobe's standard
              character names.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       cidToUnicode registry-ordering map-file
              Specifies  the  file  with  the mapping from character collection to Unicode.  Each
              line of a cidToUnicode file represents one character:

                   hex-string

              The hex-string is the Unicode (UCS-2) index for that  character.   The  first  line
              maps  CID  0,  the  second line CID 1, etc.  File size is determined by size of the
              character collection.  Only one file is allowed per character collection; the  last
              specified file is used.  There are no built-in cidToUnicode mappings.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       unicodeToUnicode font-name-substring map-file
              This is used to work around PDF fonts which have incorrect Unicode information.  It
              specifies a file which maps from the  given  (incorrect)  Unicode  indexes  to  the
              correct  ones.   The  mapping  will  be  used  for  any  font  whose  name contains
              font-name-substring.  Each line of a unicodeToUnicode file represents  one  Unicode
              character:

                  in-hex out-hex1 out-hex2 ...

              The  in-hex field is an input (incorrect) Unicode index, and the rest of the fields
              are one or more output (correct) Unicode indexes.  Each occurrence of  in-hex  will
              be converted to the specified output sequence.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       unicodeMap encoding-name map-file
              Specifies the file with mapping from Unicode to encoding-name.  These encodings are
              used for text output (see below).  Each line of  a  unicodeMap  file  represents  a
              range  of  one  or  more  Unicode  characters which maps linearly to a range in the
              output encoding:

                   in-start-hex in-end-hex out-start-hex

              Entries for single characters can be abbreviated to:

                   in-hex out-hex

              The in-start-hex and in-end-hex fields (or the single  in-hex  field)  specify  the
              Unicode  range.  The out-start-hex field (or the out-hex field) specifies the start
              of the output encoding range.  The length of the out-start-hex (or out-hex)  string
              determines  the length of the output characters (e.g., UTF-8 uses different numbers
              of bytes to represent characters in different ranges).  Entries must  be  given  in
              increasing  Unicode  order.   Only  one  file  is  allowed  per  encoding; the last
              specified file is used.  The Latin1, ASCII7, Symbol, ZapfDingbats, UTF-8, and UCS-2
              encodings are predefined.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       cMapDir registry-ordering dir
              Specifies  a  search  directory, dir, for CMaps for the registry-ordering character
              collection.  There can be multiple directories for a particular collection.   There
              are no default CMap directories.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       toUnicodeDir dir
              Specifies  a  search  directory,  dir,  for ToUnicode CMaps.  There can be multiple
              ToUnicode directories.  There are no default ToUnicode directories.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

GENERAL FONT CONFIGURATION

       fontFile PDF-font-name font-file
              Maps a PDF font, PDF-font-name, to a font for display or  PostScript  output.   The
              font  file,  font-file, can be any type allowed in a PDF file.  This command can be
              used for 8-bit or 16-bit (CID) fonts.

       fontDir dir
              Specifies a search directory  for  font  files.   There  can  be  multiple  fontDir
              commands;  all  of  the  specified directories will be searched in order.  The font
              files can be Type 1 (.pfa or .pfb) or TrueType (.ttf or .ttc); other files  in  the
              directory  will  be ignored.  The font file name (not including the extension) must
              exactly match the PDF font name.  This search is performed if the font name doesn't
              match  any  of  the fonts declared with the fontFile command.  There are no default
              fontDir directories.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       fontFileCC registry-ordering font-file
              Maps the registry-ordering character collection to a font for display or PostScript
              output.   This  mapping  is  used  if  the font name doesn't match any of the fonts
              declared  with  the  fontFile,  fontDir,  psResidentFont16,   or   psResidentFontCC
              commands.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

POSTSCRIPT FONT CONFIGURATION

       psFontPassthrough yes | no
              If  set  to  "yes",  pass 8-bit font names through to the PostScript output without
              substitution.  Fonts which are not embedded in the PDF  file  are  expected  to  be
              available on the printer.  This defaults to "no".

       psResidentFont PDF-font-name PS-font-name
              When  the  8-bit  font  PDF-font-name is used (without embedding) in a PDF file, it
              will be translated to the PostScript font PS-font-name,  which  is  assumed  to  be
              resident  in  the printer.  Typically, PDF-font-name and PS-font-name are the same.
              By default, only the Base-14 fonts are assumed to be resident.

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       psResidentFont16 PDF-font-name wMode PS-font-name encoding
              When the 16-bit (CID) font PDF-font-name with writing mode wMode is  used  (without
              embedding)   in  a  PDF  file,  it  will  be  translated  to  the  PostScript  font
              PS-font-name, which is assumbed to be resident in the printer.   The  writing  mode
              must  be  either  ´H'  for  horizontal  or  ´V' for vertical.  The resident font is
              assumed to use the specified encoding  (which  must  have  been  defined  with  the
              unicodeMap command).

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       psResidentFontCC registry-ordering wMode PS-font-name encoding
              When a 16-bit (CID) font using the registry-ordering character collection and wMode
              writing mode is used (without embedding)  in  a  PDF  file,  the  PostScript  font,
              PS-font-name,  is  substituted  for  it.   The  substituted  font is assumbed to be
              resident in the printer.  The writing mode must be either ´H' for horizontal or ´V'
              for  vertical.   The  resident font is assumed to use the specified encoding (which
              must have been defined with the unicodeMap command).

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       psEmbedType1Fonts yes | no
              If set to "no", prevents embedding of Type 1 fonts in generated  PostScript.   This
              defaults to "yes".

       psEmbedTrueTypeFonts yes | no
              If set to "no", prevents embedding of TrueType fonts in generated PostScript.  This
              defaults to "yes".

       psEmbedCIDTrueTypeFonts yes | no
              If set to "no", prevents embedding of CID TrueType fonts in  generated  PostScript.
              For  Level 3 PostScript, this generates a CID font, for lower levels it generates a
              non-CID composite font.  This defaults to "yes".

       psEmbedCIDPostScriptFonts yes | no
              If set to "no", prevents embedding of CID PostScript fonts in generated PostScript.
              For  Level 3 PostScript, this generates a CID font, for lower levels it generates a
              non-CID composite font.  This defaults to "yes".

POSTSCRIPT CONTROL

       psPaperSize width(pts) height(pts)
              Sets the paper size for PostScript output.  The width and  height  parameters  give
              the paper size in PostScript points (1 point = 1/72 inch).

       psPaperSize letter | legal | A4 | A3 | match
              Sets  the  paper  size for PostScript output to a standard size.  The default paper
              size is set when xpdf and pdftops are built, typically to "letter" or  "A4".   This
              can  also  be  set  to  "match",  which  will  set the paper size to match the size
              specified in the PDF file.

       psImageableArea llx lly urx ury
              Sets the  imageable  area  for  PostScript  output.   The  four  integers  are  the
              coordinates  of  the  lower-left  and  upper-right corners of the imageable region,
              specified in points (with the origin being the lower-left  corner  of  the  paper).
              This  defaults  to  the  full  paper  size;  the  psPaperSize option will reset the
              imageable area coordinates.

       psCrop yes | no
              If set to "yes", PostScript output is cropped to the CropBox specified in  the  PDF
              file; otherwise no cropping is done.  This defaults to "yes".

       psUseCropBoxAsPage yes | no
              If  set  to  "yes",  PostScript  output  treats  the  CropBox as the page size.  By
              default, this is "no", and the MediaBox is used as the page size.

       psExpandSmaller yes | no
              If set to "yes", PDF pages smaller than the PostScript imageable area are  expanded
              to fill the imageable area.  Otherwise, no scalling is done on smaller pages.  This
              defaults to "no".

       psShrinkLarger yes | no
              If set to yes, PDF pages larger than the PostScript imageable area  are  shrunk  to
              fit  the  imageable  area.   Otherwise,  no  scaling is done on larger pages.  This
              defaults to "yes".

       psCenter yes | no
              If set to yes, PDF pages smaller than the  PostScript  imageable  area  (after  any
              scaling)  are  centered  in the imageable area.  Otherwise, they are aligned at the
              lower-left corner of the imageable area.  This defaults to "yes".

       psDuplex yes | no
              If set to "yes", the generated PostScript will set the "Duplex"  pagedevice  entry.
              This tells duplex-capable printers to enable duplexing.  This defaults to "no".

       psLevel level1 | level1sep | level2 | level2sep | level3 | level3Sep
              Sets the PostScript level to generate.  This defaults to "level2".

       psPreload yes | no
              If  set  to  "yes",  PDF  forms  are  converted to PS procedures, and image data is
              preloaded.  This uses more memory in  the  PostScript  interpreter,  but  generates
              significantly  smaller  PS files in situations where, e.g., the same image is drawn
              on every page of a long document.  This defaults to "no".

       psOPI yes | no
              If set to "yes", generates PostScript OPI comments for all images and  forms  which
              have  OPI  information.   This  option  is  only  available  if the Xpdf tools were
              compiled with OPI support.  This defaults to "no".

       psASCIIHex yes | no
              If set to "yes", the ASCIIHexEncode filter will be used  instead  of  ASCII85Encode
              for binary data.  This defaults to "no".

       psLZW yes | no
              If  set  to  "yes",  the  LZWEncode filter will be used for lossless compression in
              PostScript output; if set to "no", the RunLengthEncode filter will be used instead.
              LZW  generates  better  compression (smaller PS files), but may not be supported by
              some printers.  This defaults to "yes".

       psUncompressPreloadedImages yes | no
              If set to "yes", all preloaded images in PS files will  uncompressed.   If  set  to
              "no", the original compressed images will be used when possible.  The "yes" setting
              is useful to work around certain buggy PostScript interpreters.  This  defaults  to
              "no".

       psMinLineWidth float
              Set the minimum line width, in points, for PostScript output.  The default value is
              0 (no minimum).

       psRasterResolution float
              Set the resolution (in dpi) for rasterized pages in  PostScript  output.   (Pdftops
              will rasterize pages which use transparency.)  This defaults to 300.

       psRasterMono yes | no
              If  set  to  "yes",  rasterized  pages  in PS files will be monochrome (8-bit gray)
              instead of color.  This defaults to "no".

       psRasterSliceSize pixels
              When rasterizing pages, pdftops splits the page into horizontal "slices", to  limit
              memory  usage.   This option sets the maximum slice size, in pixels.  This defaults
              to 20000000 (20 million).

       psAlwaysRasterize yes | no
              If set to "yes", all PostScript output will be rasterized.  This defaults to "no".

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       psFile file-or-command
              Sets the default PostScript file or print command for xpdf.  Commands start with  a
              ´|'  character;  anything  else  is  a  file.  If the file name or command contains
              spaces it must be quoted.  This defaults to unset, which tells xpdf to  generate  a
              name of the form <file>.ps for a PDF file <file>.pdf.

       fontDir dir
              See the description above, in the GENERAL FONT CONFIGURATION section.

TEXT CONTROL

       textEncoding encoding-name
              Sets  the encoding to use for text output.  (This can be overridden with the "-enc"
              switch on the command line.)  The encoding-name must be defined with the unicodeMap
              command (see above).  This defaults to "Latin1".

       textEOL unix | dos | mac
              Sets the end-of-line convention to use for text output.  The options are:

                  unix = LF
                  dos  = CR+LF
                  mac  = CR

              (This  can  be overridden with the "-eol" switch on the command line.)  The default
              value is based on the OS where xpdf and pdftotext were built.

       textPageBreaks yes | no
              If set to "yes", text extraction will insert page  breaks  (form  feed  characters)
              between pages.  This defaults to "yes".

       textKeepTinyChars yes | no
              If  set  to  "yes", text extraction will keep all characters.  If set to "no", text
              extraction will discard tiny (smaller than 3  point)  characters  after  the  first
              50000  per  page,  avoiding extremely slow run times for PDF files that use special
              fonts to do shading or cross-hatching.  This defaults to "yes".

MISCELLANEOUS SETTINGS

       initialZoom percentage | page | width | height
              Sets the initial zoom factor.  A number specifies  a  zoom  percentage,  where  100
              means  72  dpi.   You  may also specify ´page', to fit the page to the window size,
              ´width', to fit the page width to the window width, or ´height', to  fit  the  page
              height to the window height.

       continuousView yes | no
              If  set  to "yes", xpdf will start in continuous view mode, i.e., with one vertical
              screoll bar for the whole document.  This defaults to "no".

       enableFreeType yes | no
              Enables or disables use of FreeType (a TrueType / Type 1 font rasterizer).  This is
              only   relevant   if   the   Xpdf   tools   were   built   with  FreeType  support.
              ("enableFreeType" replaces the old "freetypeControl" option.)  This option defaults
              to "yes".

       disableFreeTypeHinting yes | no
              If this is set to "yes", FreeType hinting will be forced off.  This option defaults
              to "no".

       antialias yes | no
              Enables or disables font anti-aliasing in the PDF rasterizer.  This option  affects
              all  font rasterizers.  ("antialias" replaces the anti-aliasing control provided by
              the old "t1libControl" and "freetypeControl" options.)  This default to "yes".

       vectorAntialias yes | no
              Enables or disables anti-aliasing of vector graphics in the PDF  rasterizer.   This
              defaults to "yes".

       antialiasPrinting yes | no
              If this is "yes", bitmaps sent to the printer will be antialiased (according to the
              "antialias" and "vectorAntialias" settings).  If this is "no", printed bitmaps will
              not be antialiased.  This defaults to "no".

       strokeAdjust yes | no
              Enables  or  disables  stroke  adjustment.   Stroke adjustment moves horizontal and
              vertical lines by up to half a pixel to make them look "cleaner" when vector  anti-
              aliasing is enabled.  This defaults to "yes".

       screenType dispersed | clustered | stochasticClustered
              Sets  the  halftone  screen  type,  which will be used when generating a monochrome
              (1-bit) bitmap.  The  three  options  are  dispersed-dot  dithering,  clustered-dot
              dithering  (with a round dot and 45-degree screen angle), and stochastic clustered-
              dot dithering.  By default, "stochasticClustered" is used for  resolutions  of  300
              dpi and higher, and "dispersed" is used for resolutions lower then 300 dpi.

       screenSize integer
              Sets  the  size of the (square) halftone screen threshold matrix.  By default, this
              is 4 for dispersed-dot dithering, 10  for  clustered-dot  dithering,  and  100  for
              stochastic clustered-dot dithering.

       screenDotRadius integer
              Sets  the  halftone screen dot radius.  This is only used when screenType is set to
              stochasticClustered, and it defaults to 2.  In clustered-dot mode, the  dot  radius
              is half of the screen size.  Dispersed-dot dithering doesn't have a dot radius.

       screenGamma float
              Sets  the  halftone screen gamma correction parameter.  Gamma values greater than 1
              make the output brighter; gamma values less than 1 make  it  darker.   The  default
              value is 1.

       screenBlackThreshold float
              When  halftoning,  all values below this threshold are forced to solid black.  This
              parameter is a floating point value between 0 (black) and 1 (white).   The  default
              value is 0.

       screenWhiteThreshold float
              When  halftoning,  all values above this threshold are forced to solid white.  This
              parameter is a floating point value between 0 (black) and 1 (white).   The  default
              value is 1.

       minLineWidth float
              Set  the  minimum  line width, in device pixels.  This affects the rasterizer only,
              not  the  PostScript  converter  (except  when  it  uses  rasterization  to  handle
              transparency).  The default value is 0 (no minimum).

       drawAnnotations yes | no
              If  set  to  "no",  annotations will not be drawn or printed.  The default value is
              "yes".

              NOTE: This option is not currently supported in the Poppler version of xpdf.

       overprintPreview yes | no
              If set to "yes", generate overprint preview output, honoring the OP/op/OPM settings
              in the PDF file.  Ignored for non-CMYK output.  The default value is "no".

       launchCommand command
              Sets  the  command  executed when you click on a "launch"-type link.  The intent is
              for the command to be a program/script which determines the file type and runs  the
              appropriate  viewer.   The  command  line  will consist of the file to be launched,
              followed by any parameters specified with the link.  Do not use "%s" in  "command".
              By  default,  this  is  unset,  and Xpdf will simply try to execute the file (after
              prompting the user).

       urlCommand command
              Sets the command executed when you click on a URL link.  The string  "%s"  will  be
              replaced with the URL.  (See the example below.)  This has no default value.

       movieCommand command
              Sets  the  command  executed when you click on a movie annotation.  The string "%s"
              will be replaced with the movie file name.  This has no default value.

       mapNumericCharNames yes | no
              If set to "yes", the Xpdf tools will attempt to map various numeric character names
              sometimes  used  in  font subsets.  In some cases this leads to usable text, and in
              other cases it leads to gibberish -- there is  no  way  for  Xpdf  to  tell.   This
              defaults to "yes".

       mapUnknownCharNames yes | no
              If  set to "yes", and mapNumericCharNames is set to "no", the Xpdf tools will apply
              a simple pass-through mapping (Unicode index = character code) for all unrecognized
              glyph  names.  (For CID fonts, setting mapNumericCharNames to "no" is unnecessary.)
              In some cases, this leads to usable text, and in other cases it leads to  gibberish
              -- there is no way for Xpdf to tell.  This defaults to "no".

       mapExtTrueTypeFontsViaUnicode yes | no
              When  rasterizing  text  using an external TrueType font, there are two options for
              handling character codes.  If mapExtTrueTypeFontsViaUnicode is set to  "yes",  Xpdf
              will  use  the  font encoding/ToUnicode info to map character codes to Unicode, and
              then   use   the   font's   Unicode   cmap   to   map   Unicode   to   GIDs.     If
              mapExtTrueTypeFontsViaUnicode  is set to "no", Xpdf will assume the character codes
              are GIDs (i.e., use an identity mapping).  This defaults to "yes".

       enableXFA yes | no
              If set to "yes", an XFA form (if present) will be rendered in place of an AcroForm.
              If "no", an XFA form will never be rendered.  This defaults to "yes".

       bind modifiers-key context command ...
              Add a key or mouse button binding.  Modifiers can be zero or more of:

                  shift-
                  ctrl-

                  alt-
              Key can be a regular ASCII character, or any one of:

                  space
                  tab
                  return
                  enter
                  backspace
                  insert
                  delete
                  home
                  end
                  pgup
                  pgdn
                  left / right / up / down        (arrow keys)
                  f1 .. f35                       (function keys)
                  mousePress1 .. mousePress7      (mouse buttons)
                  mouseRelease1 .. mouseRelease7  (mouse buttons)

              Context is either "any" or a comma-separated combination of:

                  fullScreen / window       (full screen mode on/off)
                  continuous / singlePage   (continuous mode on/off)
                  overLink / offLink        (mouse over link or not)
                  scrLockOn / scrLockOff    (scroll lock on/off)

              The context string can include only one of each pair in the above list.

              Command  is  an  Xpdf command (see the COMMANDS section of the xpdf(1) man page for
              details).  Multiple commands are separated by whitespace.

              The bind command replaces any existing binding, but only if it was defined for  the
              exact  same  modifiers,  key,  and  context.   All tokens (modifiers, key, context,
              commands) are case-sensitive.

              Example key bindings:

                  # bind ctrl-a in any context to the nextPage
                  # command
                  bind ctrl-a any nextPage

                  # bind uppercase B, when in continuous mode
                  # with scroll lock on, to the reload command
                  # followed by the prevPage command
                  bind B continuous,scrLockOn reload prevPage

              See the xpdf(1) man page for more examples.

       unbind modifiers-key context
              Removes a key binding established with the bind command.  This is  most  useful  to
              remove  default key bindings before establishing new ones (e.g., if the default key
              binding is given for "any" context, and you want to create  new  key  bindings  for
              multiple contexts).

       printCommands yes | no
              If  set  to  "yes",  drawing  commands  are printed as they're executed (useful for
              debugging).  This defaults to "no".

       errQuiet yes | no
              If set to "yes", this suppresses all error and warning messages  from  all  of  the
              Xpdf tools.  This defaults to "no".

EXAMPLES

       The following is a sample xpdfrc file.

       # from the Thai support package
       nameToUnicode /usr/local/share/xpdf/Thai.nameToUnicode

       # from the Japanese support package
       cidToUnicode Adobe-Japan1 /usr/local/share/xpdf/Adobe-Japan1.cidToUnicode
       unicodeMap   JISX0208     /usr/local/share/xpdf/JISX0208.unicodeMap
       cMapDir      Adobe-Japan1 /usr/local/share/xpdf/cmap/Adobe-Japan1

       # use the Base-14 Type 1 fonts from ghostscript
       fontFile Times-Roman           /usr/local/share/ghostscript/fonts/n021003l.pfb
       fontFile Times-Italic          /usr/local/share/ghostscript/fonts/n021023l.pfb
       fontFile Times-Bold            /usr/local/share/ghostscript/fonts/n021004l.pfb
       fontFile Times-BoldItalic      /usr/local/share/ghostscript/fonts/n021024l.pfb
       fontFile Helvetica             /usr/local/share/ghostscript/fonts/n019003l.pfb
       fontFile Helvetica-Oblique     /usr/local/share/ghostscript/fonts/n019023l.pfb
       fontFile Helvetica-Bold        /usr/local/share/ghostscript/fonts/n019004l.pfb
       fontFile Helvetica-BoldOblique /usr/local/share/ghostscript/fonts/n019024l.pfb
       fontFile Courier               /usr/local/share/ghostscript/fonts/n022003l.pfb
       fontFile Courier-Oblique       /usr/local/share/ghostscript/fonts/n022023l.pfb
       fontFile Courier-Bold          /usr/local/share/ghostscript/fonts/n022004l.pfb
       fontFile Courier-BoldOblique   /usr/local/share/ghostscript/fonts/n022024l.pfb
       fontFile Symbol                /usr/local/share/ghostscript/fonts/s050000l.pfb
       fontFile ZapfDingbats          /usr/local/share/ghostscript/fonts/d050000l.pfb

       # use the Bakoma Type 1 fonts
       # (this assumes they happen to be installed in /usr/local/fonts/bakoma)
       fontDir /usr/local/fonts/bakoma

       # set some PostScript options
       psPaperSize          letter
       psDuplex             no
       psLevel              level2
       psEmbedType1Fonts    yes
       psEmbedTrueTypeFonts yes
       psFile               "| lpr -Pprinter5"

       # assume that the PostScript printer has the Univers and
       # Univers-Bold fonts
       psResidentFont Univers      Univers
       psResidentFont Univers-Bold Univers-Bold

       # set the text output options
       textEncoding UTF-8
       textEOL      unix

       # misc options
       enableFreeType  yes
       launchCommand   viewer-script
       urlCommand      "netscape -remote 'openURL(%s)'"

FILES

       /etc/xpdf/xpdfrc
              This  is the default location for the system-wide configuration file.  Depending on
              build options, it may be placed elsewhere.

       $HOME/.xpdfrc
              This is the user's configuration file.  If it exists, it will be read in  place  of
              the system-wide file.

AUTHOR

       The Xpdf software and documentation are copyright 1996-2014 Glyph & Cog, LLC.

SEE ALSO

       xpdf(1),  pdftops(1),  pdftotext(1),  pdftohtml(1), pdfinfo(1), pdffonts(1), pdfdetach(1),
       pdftoppm(1), pdftopng(1), pdfimages(1)
       http://www.foolabs.com/xpdf/

                                           28 May 2014                                  xpdfrc(5)