Provided by: libinput-tools_1.20.0-1ubuntu0.3_amd64 bug

NAME

       libinput-analyze-per-slot-delta - analyze the per-event delta movement for touch slots

SYNOPSIS

       libinput analyze per-slot-delta [--help] [options] recording.yml

DESCRIPTION

       The  libinput  analyze  per-slot-delta tool analyzes a recording made with libinput record
       and prints the delta movement per touch slot.

       This is a debugging tool only, its output may change at any  time.  Do  not  rely  on  the
       output.

OPTIONS

       --help  Print help

       --ignore-below=<units or mm>
               Ignore  any movement below the given threshold. The threshold is in mm if --use-mm
               is selected or in device units otherwise.

       --threshold=<units or mm>
               Color any movement above this threshold in red. The threshold is in mm if --use-mm
               is selected or in device units otherwise.

       --use-mm
               Print data in mm instead of device units

       --use-st
               Use the single-touch ABS_X/ABS_Y instead of the multitouch axes

       --use-absolute
               Print absolute coordinates, not deltas

OUTPUT

       An  example  output for a single finger touch on a touchpad supporting two slots is below.
       This output is with the use of the --use-mm flag.

        0.000000   +0ms TOU:     ++++++     |  ************* |
        0.021900  +21ms TOU: →↘ +1.10/+0.14 |  ************* |
        0.033468  +11ms TOU: →↘ +1.15/+0.19 |  ************* |
        0.043856  +10ms TOU: →↘ +1.76/+0.22 |  ************* |
        0.053237   +9ms TOU: →↘ +2.20/+0.19 |  ************* |

       The entry ++++++ indicates a finger has been put down, ------  indicates  the  finger  has
       lifted.   The  left-most column is the absolute timestamp in seconds.microseconds followed
       by the relative time of the event to the previous event.

       The word TOU in  this  example  represents  BTN_TOUCH,  similar  abbreviations  exist  for
       BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP, and BTN_TOOL_QUINTTAP.

       The  arrows  indicate  the  approximate  direction  on a 16-point compass, in this example
       EastSouthEast.

       Each multitouch slot supported by the hardware has one  column,  where  the  column  shows
       asterisk  ********  no finger is down for that slot. Where the column shows spaces only, a
       finger is down but no data is currently available.

       In the above example, the third events occurs ~33ms into the recording, is 11ms after  the
       previous  event  and  has an east south-east direction. The movement for this event was x:
       1.15 and y: 0.19 mm. A second finger is not currently down.

LIBINPUT

       Part of the libinput(1) suite

                                                               libinput-analyze-per-slot-delta(1)