Provided by: esptool_4.6.2+dfsg-0.1_all bug

NAME

       espefuse - ESP32 efuse get/set tool

DESCRIPTION

       usage: espefuse [OPTION] COMMAND

   command arguments:
       Run espefuse {command} -h for additional help

       burn_efuse
              Burn the efuse with the specified name

       read_protect_efuse
              Disable readback for the efuse with the specified name

       write_protect_efuse
              Disable writing to the efuse with the specified name

       burn_block_data
              Burn  non-key  data  to  EFUSE blocks. (Don't use this command to burn key data for
              Flash Encryption or ESP32 Secure Boot V1, as the byte order of keys is swapped (use
              burn_key)).

       burn_bit
              Burn bit in the efuse block.

       adc_info
              Display information about ADC calibration data stored in efuse.

       dump   Dump raw hex values of all efuses

       summary
              Print human-readable summary of efuse values

       execute_scripts
              Executes scripts to burn at one time.

       check_error
              Checks eFuse errors

       burn_key
              Burn  a  256-bit  key  to  EFUSE: BLOCK1, flash_encryption, BLOCK2, secure_boot_v1,
              secure_boot_v2, BLOCK3

       burn_key_digest
              Parse a RSA public key and burn the digest to eFuse for use with Secure Boot V2

       set_flash_voltage
              Permanently set the internal flash voltage regulator to either 1.8V, 3.3V  or  OFF.
              This means GPIO12 can be high or low at reset without changing the flash voltage.

       burn_custom_mac
              Burn a 48-bit Custom MAC Address to EFUSE BLOCK3.

       get_custom_mac
              Prints the Custom MAC Address.

   options:
       -h, --help
              show this help message and exit

       --chip {auto,CHIP}
              Target chip type

       --baud BAUD, -b BAUD
              Serial port baud rate used when flashing/reading

       --port PORT, -p PORT
              Serial port device

       --before {default_reset,usb_reset,no_reset,no_reset_no_sync}
              What to do before connecting to the chip

       --debug, -d
              Show debugging information (loglevel=DEBUG)

       --virt For  host  tests,  the  tool will work in the virtual mode (without connecting to a
              chip).

       --path-efuse-file PATH_EFUSE_FILE
              For host tests, saves efuse memory to file.

       --do-not-confirm
              Do not pause for confirmation before permanently writing efuses. Use with caution.

EXAMPLES

       Display device features, SPI flash manufacturer and device ID:

           esptool flash_id

       Flash ESP8266 Espressif AT v1.6.2 firmware to ESP-WROOM-02 board:

           esptool write_flash --flash_mode dio --flash_size 4MB-c1 0x00 boot_v1.7.bin 0x1000 at/1024+1024/user1.2048.new.5.bin 0xfe000 blank.bin 0x3fc000 esp_init_data_default_v08.bin 0x3fe000 blank.bin

       Flash ESP32 Espressif AT v1.1.1 firmware to ESP-WROOM-32 board:

           esptool write_flash --flash_mode dio --flash_freq 40m --flash_size detect 0x1000 bootloader/bootloader.bin 0x20000 at_customize.bin 0x21000 customized_partitions/ble_data.bin 0x24000 customized_partitions/server_cert.bin 0x26000 customized_partitions/server_key.bin 0x28000 customized_partitions/server_ca.bin 0x2a000 customized_partitions/client_cert.bin 0x2c000 customized_partitions/client_key.bin 0x2e000 customized_partitions/client_ca.bin 0xf000 phy_init_data.bin 0x100000 esp-at.bin 0x8000 partitions_at.bin

       Display ESP32 efuse state summary:

           espefuse --port /dev/ttyUSB0 summary

       Generate a flash encryption key:

           espsecure generate_flash_encryption_key key.bin

       Burn the key to the device (WARNING: one time only operation):

           espefuse --port /dev/ttyUSB1 burn_key flash_encryption key.bin

       Encrypt flash data:

           espsecure encrypt_flash_data --keyfile key.bin --address 0x10000 -o my-app-encrypted.bin my-app.bin

AUTHOR

       esptool.py was started by Fredrik Ahlberg as an unofficial  community  project,  currently
       maintained  by  Angus  Gratton and supported by Espressif Systems (Shanghai) PTE LTD. This
       manual page has been produced by Milan Kupcevic <milan@debian.org> for the Debian  project
       and can be used by others.

REPORTING BUGS

       Review: <https://github.com/espressif/esptool/#troubleshooting>
       Known issues: <https://github.com/espressif/esptool/issues>
       Report new issues at: <https://github.com/espressif/esptool/issues/new>

COPYRIGHT

       Copyright  ©  2014-2017  Fredrik  Ahlberg, Angus Gratton, Espressif Systems (Shanghai) PTE
       LTD,  other  contributors  as  noted.   License  GPLv2+:  GNU  GPL  version  2  or   later
       <http://gnu.org/licenses/gpl.html>.   This  is  free  software: you are free to change and
       redistribute it.  There is NO WARRANTY, to the extent permitted by law.

SEE ALSO

       esptool(1), espefuse(1), espsecure(1)