Provided by: libgensio-dev_2.6.6-6_amd64 
NAME
gensio_event - Event handler for events from a gensio
SYNOPSIS
#include <gensio/gensio.h>
typedef int (*gensio_event)(struct gensio *io, void *user_data,
int event, int err,
unsigned char *buf, gensiods *buflen,
const char *const *auxdata);
DESCRIPTION
When an event happens on a gensio that is reported to the user, the gensio library calls
the gensio_event type handler that was registered with the gensio.
The use of the various parameters depends on the particular event. The parameters that
don't vary are:
io - The gensio the event is being reported for.
user_data
- The user_data supplied when the event handler was registered.
event - The particular event being reported.
Events follow.
GENSIO_EVENT_READ
Called when data is read from the I/O device.
If err is zero, buf points to a data buffer and buflen is the number of bytes available.
If err is set, buf and buflen are undefined and you should not use them or modify them.
err is a standard gensio errno.
If err is non-zero, you must set the number of bytes consumed in buflen. Note that you
must disable read if you don't consume all the bytes or in other situations where you
don't want the read handler called. auxdata, if not NULL, may contain information about
the message, like if it is out of band (oob) data. See information on the specific gensio
for details.
Note that only one read callback is allowed to run at a time on a gensio.
If an error is reported in err, then the gensio will be closed. This is used to report
that the other end closed the connection (GE_REMCLOSE), or that other internal errors
occurred.
You should always return zero, it used to not matter, but it does now.
GENSIO_EVENT_WRITE_READY
Called when data can be written to the I/O device.
Note that only one write callback is allowed to run at a time on a gensio.
Unlike Unix-like systems, a write handler will be called (if enabled) if the lower layer
has an exception. This is necessary because we don't have a separate exception handler
coming from the lower layer. But this lets the write operation return a failure if
something has gone wrong.
You should always return zero, it used to not matter, but it does now.
GENSIO_EVENT_NEW_CHANNEL
A new channel has been created by the remote end of the connection. The new channel
gensio is in buf and must be cast. Information about the channel will be passed in
auxdata, see documentation on the particular gensio for details. If this returns an error
(non-zero) the channel is shut down, though in the future specific error returns may have
different behavior. You must return GE_NOTSUP (like you should for all unhandled events)
if you don't support this event. All other error returns besides zero and GE_NOTSUP are
reserved.
GENSIO_EVENT_SEND_BREAK
Got a request from the other end to send a break. Telnet client or server.
Blocked if gensio read is disabled.
GENSIO_EVENT_AUTH_BEGIN
Authorization has begun, the username and service is available but nothing else.
There are a few special return values from this event:
GE_AUTHREJECT
- Fail the connection, but continue to go through the motions. This should be
called if the user was invalid or data wasn't properly provided.
0 - authorization has succeeded. No more authentication is required, but the
protocol may still go through the motions of the protocol.
GE_NOTSUP
- Just continue with authentication.
Any other error will terminate the connection, these should generally be things like out
of memory and such, NOT authentication failures of any kind.
certauth only
GENSIO_EVENT_PRECERT_VERIFY
The connection has received a certificate but has not verified it yet. This lets the user
modify the certificate authority based on certificate information.
Return values are the same as GENSIO_EVENT_AUTH_BEGIN.
ssl and certauth
GENSIO_EVENT_POSTCERT_VERIFY
The connection has received a certificate and has verified it. The verification may have
failed. This lets the user handle their own verification override. err will be one of
the following:
0 on verification success.
GE_CERTNOTFOUND
if no certificate was found
GE_CERTREVOKED
if the if the certificate was revoked
GE_CERTEXPIRED
if the certificate has expired
GE_CERTINVALID
for other errors.
Any other error will terminate the connection, these should generally be things like out
of memory and such, NOT authentication failures of any kind.
auxdata[0] will be an error string (or NULL if none available). Make sure to check if
auxdata is NULL before indexing auxdata[0].
Return values are:
0 - Authentication successed (even if an error was reported).
GE_NOTSUP
- Continue with the authentication process. Password authentication may occur, for
instance, if an error was reported.
GE_AUTHREJECT
- Fail the authentication. No more authentication will occur.
ssl and certauth
GENSIO_EVENT_PASSWORD_VERIFY
A password has been received from the remote end, it is passed in buf. The callee should
validate it. If doing 2-factor auth, you should also fetch the 2-factor data with the
GENSIO_CONTROL_2FA control and handle that here, too. If this function is called,
GENSIO_EVENT_2FA_VERIFY is not called. The length is passed in *buflen. Note that the
buf is nil terminated one past the length. Return values are:
0 - The password verification succeeds.
GE_NOTSUP
- Fail the validation, but the connection shutdown will depend on the setting of
allow-authfail.
GE_AUTHREJECT
- Reject the authorization for some other reason besides failing validation.
Any other error will terminate the connection, these should generally be things like out
of memory and such, NOT authentication failures of any kind.
certauth only
GENSIO_EVENT_REQUEST_PASSWORD
On the client side of an authorization, the remote end has requested that a password be
sent. buf points to a buffer of *buflen bytes to place the password in, the user should
put the password there and update *buflen to the actual length.
Return 0 for success, or any other gensio error to fail the password fetch.
GENSIO_EVENT_REQUEST_2FA
On the client side of an authorization, the remote end has requested two-factor
authentication data, but it has not been supplied already. buf points to a pointer to a
buffer (unsigned char **) that you should return. It should be allocated with the zalloc
function of the os_functions in use. *buflen is where to put the size of the buffer.
This buffer will be zeroed and freed when done.
Return 0 for success, or any other gensio error to fail the 2FA fetch.
GENSIO_EVENT_2FA_VERIFY
A 2-factor auth has been received from the remote end and passed as part of the password
transfer. This is only called if the login was validated with a certificate, this is
called to handle 2-factor auth with a certificate. The 2fa data is passed in buf. The
callee should validate it. The length is passed in *buflen. Note that the buf is nil
terminated one past the length. Return values are:
0 - The verification succeeds.
GE_NOTSUP
- Fail the validation, but the connection shutdown will depend on the setting of
allow-authfail.
GE_AUTHREJECT
- Reject the authorization for some other reason besides failing validation.
Any other error will terminate the connection, these should generally be things like out
of memory and such, NOT authentication failures of any kind.
certauth only
GENSIO_EVENT_PARMLOG
When parsing a gensio string, this will be called if the gensio detects an error in the
initial parsing or initial configuration. This is called only during the allocation (
str_to_gensio() or equivalent). Loggin this information will make it easier for users to
find out what's wrong with their gensio strings.
The buf parameter contains a pointer to the following structure:
struct gensio_parmlog_data {
const char *log;
va_list args;
};
which can be printed with normal vprintf() and the like.
GENSIO_EVENT_WIN_SIZE
The other end of the connection is reporting a window size change. Currently only on
telnet with RFC1073 enabled.
OTHER EVENTS
sergensio gensios have a set of other events, see sergensio(5) for details. Other gensio
that are not part of the gensio library proper may have their own events, too.
RETURN VALUES
See the individual events for the values you should return. If an event is not handled by
the event handler, the handler must return GE_NOTSUP, except in the case of
GENSIO_EVENT_READ and GENSIO_EVENT_WRITE_READY which must be handled.
SEE ALSO
gensio_set_callback(3), str_to_gensio_child(3), gensio_open_channel(3),
gensio_open_channel_s(3), gensio_acc_str_to_gensio(3), str_to_gensio(3) sergensio(5),
gensio_err(3)
21 Feb 2019 gensio_event(3)