Provided by: wireshark-common_4.0.8-1_amd64 bug

NAME

       wireshark-filter - Wireshark display filter syntax and reference

SYNOPSIS

       wireshark [other options] [ -Y "display filter expression" | --display-filter "display
       filter expression" ]

       tshark [other options] [ -Y "display filter expression" | --display-filter "display filter
       expression" ]

DESCRIPTION

       Wireshark and TShark share a powerful filter engine that helps remove the noise from a
       packet trace and lets you see only the packets that interest you. If a packet meets the
       requirements expressed in your filter, then it is displayed in the list of packets.
       Display filters let you compare the fields within a protocol against a specific value,
       compare fields against fields, and check the existence of specified fields or protocols.

       Filters are also used by other features such as statistics generation and packet list
       colorization (the latter is only available to Wireshark). This manual page describes their
       syntax. A comprehensive reference of filter fields can be found within Wireshark and in
       the display filter reference at https://www.wireshark.org/docs/dfref/.

FILTER SYNTAX

   Check whether a field or protocol exists
       The simplest filter allows you to check for the existence of a protocol or field. If you
       want to see all packets which contain the IP protocol, the filter would be "ip" (without
       the quotation marks). To see all packets that contain a Token-Ring RIF field, use
       "tr.rif".

       Whenever a protocol or field appears as the argument of a function in a filter, an exists
       operator for that protocol or field implicitly appears.

   Values and operators
       Each field has a value, and that value can be used in operations with comparable values
       (which may be literals, other fields, or function results). The value of a field is not
       necessarily what appears in the Wireshark display or TShark output. For example, a
       protocol is semantically equivalent to the sequence of bytes that it spans, not its
       displayed text in the protocol tree.

   Comparison operators
       The comparison operators can be expressed either through English-like abbreviations or
       through C-like symbols:

           eq, ==    Equal
           ne, !=    Not Equal
           gt, >     Greater Than
           lt, <     Less Than
           ge, >=    Greater than or Equal to
           le, <=    Less than or Equal to

       The ordering depends on the value type in the usual way (e.g., lexicographic for strings
       and arithmetic for integers.) A field may appear more than once in a given frame. In that
       case equality can be strict (all fields must match the condition) or not (any field must
       match the condition). The inequality is the logical negation of equality. The following
       table contains all equality operators, their aliases and meaning:

           eq, any_eq, ==    Any field must be equal
           ne, all_ne, !=    All fields must be not equal
               all_eq, ===   All fields must be equal
               any_ne, !==   Any fields must be not equal

       The operators "any" or "all" can be used with any comparison operator to make the test
       match any or all fields:

           all tcp.port > 1024

           any ip.addr != 1.1.1.1

       The "any" and "all" modifiers take precedence over comparison operators such as "===" and
       "any_eq".

   Search and match operators
       Additional operators exist expressed only in English, not C-like syntax:

           contains     Does the protocol, field or slice contain a value
           matches, ~   Does the string match the given case-insensitive
                        Perl-compatible regular expression

       The "contains" operator allows a filter to search for a sequence of characters, expressed
       as a string, or bytes, expressed as a byte array. The type of the left hand side of the
       "contains" operator must be comparable to that of the right hand side after any implicit
       or explicit conversions.

       For example, to search for a given HTTP URL in a capture, the following filter can be
       used:

           http contains "https://www.wireshark.org"

       The "contains" operator cannot be used on atomic fields, such as numbers or IP addresses.

       The "matches" or "~" operator allows a filter to apply to a specified Perl-compatible
       regular expression (PCRE2). The regular expression must be a double quoted string. The
       left hand side of the "matches" operator must be a string, which can be a non-stringlike
       field implicitly or explicitly converted to a string. Matches are case-insensitive by
       default. For example, to search for a given WAP WSP User-Agent, you can write:

           wsp.header.user_agent matches "cldc"

       This would match "cldc", "CLDC", "cLdC" or any other combination of upper and lower case
       letters.

       You can force case sensitivity using

           wsp.header.user_agent matches "(?-i)cldc"

       This is an example of PCRE2’s (?option) construct. (?-i) performs a case-sensitive pattern
       match but other options can be specified as well. More information can be found in the
       pcre2pattern(3)|https://www.pcre.org/current/doc/html/pcre2pattern.html man page.

   Functions
       The filter language has the following functions:

           upper(string-field) - converts a string field to uppercase
           lower(string-field) - converts a string field to lowercase
           len(field)          - returns the byte length of a string or bytes field
           count(field)        - returns the number of field occurrences in a frame
           string(field)       - converts a non-string field to string
           max(f1,...,fn)      - return the maximum value
           min(f1,...,fn)      - return the minimum value
           abs(field)          - return the absolute value of numeric fields

       upper() and lower() are useful for performing case-insensitive string comparisons. For
       example:

           upper(ncp.nds_stream_name) contains "MACRO"
           lower(mount.dump.hostname) == "angel"

       string() converts a field value to a string, suitable for use with operators like
       "matches" or "contains". Integer fields are converted to their decimal representation. It
       can be used with IP/Ethernet addresses (as well as others), but not with string or byte
       fields. For example:

           string(frame.number) matches "[13579]$"

       gives you all the odd packets.

       max() and min() take any number of arguments and returns one value, respectively the
       largest/smallest. The arguments must all have the same type.

   Protocol field types
       Each protocol field is typed. The types are:

           ASN.1 object identifier, plain or relative
           AX.25 address
           Boolean
           Byte sequence
           Character string
           Character, 1 byte
           Date and time
           Ethernet or other MAC address
           EUI64 address
           Fibre Channel WWN
           Floating point, single or double precision
           Frame number
           Globally Unique Identifier
           IEEE-11073 floating point, 16 or 32 bits
           IPv4 address
           IPv6 address
           IPX network number
           Label
           OSI System-ID
           Protocol
           Signed integer, 1, 2, 3, 4, or 8 bytes
           Time offset
           Unsigned integer, 1, 2, 3, 4, or 8 bytes
           VINES address

       An integer may be expressed in decimal, octal, hexadecimal or binary notation, or as a
       C-style character constant. The following seven display filters are equivalent:

           frame.len > 10
           frame.len > 012
           frame.len > 0xa
           frame.len > 0b1010
           frame.len > '\n'
           frame.len > '\x0a'
           frame.len > '\012'

       Boolean values are either true or false. In a display filter expression testing the value
       of a Boolean field, true is expressed as the word "True" or "TRUE" (without quotes) or any
       non-zero number. False is expressed as "False" or "FALSE" or the number zero. For example,
       a token-ring packet’s source route field is Boolean. To find any source-routed packets, a
       display filter would be any of the following:

           tr.sr == 1
           tr.sr == True
           tr.sr == TRUE

       Non source-routed packets can be found with:

           tr.sr == 0
           tr.sr == False
           tr.sr == FALSE

       Ethernet addresses and byte arrays are represented by hex digits. The hex digits may be
       separated by colons, periods, or hyphens:

           eth.dst eq ff:ff:ff:ff:ff:ff
           aim.data == 0.1.0.d
           fddi.src == aa-aa-aa-aa-aa-aa
           echo.data == 7a

       IPv4 addresses can be represented in either dotted decimal notation or by using the
       hostname:

           ip.src == 192.168.1.1
           ip.dst eq www.mit.edu

       IPv4 addresses can be compared with the same logical relations as numbers: eq, ne, gt, ge,
       lt, and le. The IPv4 address is stored in host order, so you do not have to worry about
       the endianness of an IPv4 address when using it in a display filter.

       Classless Inter-Domain Routing (CIDR) notation can be used to test if an IPv4 address is
       in a certain subnet. For example, this display filter will find all packets in the 129.111
       network:

           ip.addr == 129.111.0.0/16

       Remember, the number after the slash represents the number of bits used to represent the
       network. CIDR notation can also be used with hostnames, as in this example of finding IP
       addresses on the same network as 'sneezy' (requires that 'sneezy' resolve to an IP address
       for filter to be valid):

           ip.addr eq sneezy/24

       The CIDR notation can only be used on IP addresses or hostnames, not in variable names.
       So, a display filter like "ip.src/24 == ip.dst/24" is not valid (yet).

       Transaction and other IDs are often represented by unsigned 16 or 32 bit integers and
       formatted as a hexadecimal string with "0x" prefix:

           (dhcp.id == 0xfe089c15) || (ip.id == 0x0373)

       Strings are enclosed in double quotes:

           http.request.method == "POST"

       Inside double quotes, you may use a backslash to embed a double quote or an arbitrary byte
       represented in either octal or hexadecimal.

           browser.comment == "An embedded \" double-quote"

       Use of hexadecimal to look for "HEAD":

           http.request.method == "\x48EAD"

       Use of octal to look for "HEAD":

           http.request.method == "\110EAD"

       This means that you must escape backslashes with backslashes inside double quotes.

           smb.path contains "\\\\SERVER\\SHARE"

       looks for \\SERVER\SHARE in "smb.path". This may be more conveniently written as

           smb.path contains r"\\SERVER\SHARE"

       String literals prefixed with 'r' are called "raw strings". Such strings treat backslash
       as a literal character. Double quotes may still be escaped with backslash but note that
       backslashes are always preserved in the result.

       The following table lists all escape sequences supported with strings and character
       constants:

           \'          single quote
           \"          double quote
           \\          backslash
           \a          audible bell
           \b          backspace
           \f          form feed
           \n          line feed
           \r          carriage return
           \t          horizontal tab
           \v          vertical tab
           \NNN        arbitrary octal value
           \xNN        arbitrary hexadecimal value
           \uNNNN      Unicode codepoint U+NNNN
           \UNNNNNNNN  Unicode codepoint U+NNNNNNNN

       Date and time values can be given in ISO 8601 format or using a legacy month-year-time
       format:

           "2020-07-04T12:34:56"
           "Sep 26, 2004 23:18:04.954975"

       The 'T' separator in ISO 8601 can be omitted. ISO 8601 supports timezone designators as
       UTC or an offset from UTC. Legacy formats can append the value "UTC" at the end to specify
       time in Coordinated Universal Time. Otherwise date and time values are interpreted as
       local time.

   The slice operator
       You can take a slice of a field if the field is a text string or a byte array. For
       example, you can filter on the vendor portion of an ethernet address (the first three
       bytes) like this:

           eth.src[0:3] == 00:00:83

       Another example is:

           http.content_type[0:4] == "text"

       You can use the slice operator on a protocol name, too. The "frame" protocol can be
       useful, encompassing all the data captured by Wireshark or TShark.

           token[0:5] ne 0.0.0.1.1
           llc[0] eq aa
           frame[100-199] contains "wireshark"

       The following syntax governs slices:

           [i:j]    i = start_offset, j = length
           [i-j]    i = start_offset, j = end_offset, inclusive.
           [i]      i = start_offset, length = 1
           [:j]     start_offset = 0, length = j
           [i:]     start_offset = i, end_offset = end_of_field

       Offsets can be negative, in which case they indicate the offset from the end of the field.
       The last byte of the field is at offset -1, the last but one byte is at offset -2, and so
       on. Here’s how to check the last four bytes of a frame:

           frame[-4:4] == 0.1.2.3

       or

           frame[-4:] == 0.1.2.3

       A slice can always be compared against either a string or a byte sequence.

       Slices can be combined. You can concatenate them using the comma operator:

           ftp[1,3-5,9:] == 01:03:04:05:09:0a:0b

       This concatenates offset 1, offsets 3-5, and offset 9 to the end of the ftp data.

   The layer operator
       A field can be restricted to a certain layer in the protocol stack using the layer
       operator (#), followed by a decimal number:

           ip.addr#2 == 192.168.30.40

       matches only the inner (second) layer in the packet. Layers use simple stacking semantics
       and protocol layers are counted sequentially starting from 1. For example, in a packet
       that contains two IPv4 headers, the outer (first) source address can be matched with
       "ip.src#1" and the inner (second) source address can be matched with "ip.src#2".

       For more complicated ranges the same syntax used with slices is valid:

           tcp.port#[2-4]

       means layers number 2, 3 or 4 inclusive. The hash symbol is required to distinguish a
       layer range from a slice.

   The membership operator
       A field may be checked for matches against a set of values simply with the membership
       operator. For instance, you may find traffic on common HTTP/HTTPS ports with the following
       filter:

           tcp.port in {80,443,8080}

       as opposed to the more verbose:

           tcp.port == 80 or tcp.port == 443 or tcp.port == 8080

       To find HTTP requests using the HEAD or GET methods:

           http.request.method in {"HEAD", "GET"}

       The set of values can also contain ranges:

           tcp.port in {443, 4430..4434}
           ip.addr in {10.0.0.5 .. 10.0.0.9, 192.168.1.1..192.168.1.9}
           frame.time_delta in {10 .. 10.5}

   Implicit type conversions
       Fields which are sequences of bytes, including protocols, are implicitly converted to
       strings for comparisons against (double quoted) literal strings and raw strings.

       So, for instance, the following filters are equivalent:

           tcp.payload contains "GET"
           tcp.payload contains 47.45.54

       As noted above, a slice can also be compared in either way:

           frame[60:2] gt 50.51
           frame[60:2] gt "PQ"

       The inverse does not occur; stringlike fields are not implicitly converted to byte arrays.
       (Some operators allow stringlike fields to be compared with unquoted literals, which are
       then treated as strings; this is deprecated in general and specifically disallowed by the
       "matches" operator. Literal strings should be double quoted for clarity.)

       A hex integer that is 0xff or less (which means it fits inside one byte) can be implicitly
       converted to a byte string. This is not allowed for hex integers greater than one byte,
       because then one would need to specify the endianness of the multi-byte integer. Also,
       this is not allowed for decimal or octal numbers, since they would be confused with the
       hex numbers that make up byte string literals. Nevertheless, single-byte hex integers can
       be convenient:

           frame[4] == 0xff
           frame[1:4] contains 0x02

   Bitwise operators
       It is also possible to define tests with bitwise operations. Currently the following
       bitwise operator is supported:

           bitwise_and, &        Bitwise AND

       The bitwise AND operation allows masking bits and testing to see if one or more bits are
       set. Bitwise AND operates on integer protocol fields and slices.

       When testing for TCP SYN packets, you can write:

           tcp.flags & 0x02

       That expression will match all packets that contain a "tcp.flags" field with the 0x02 bit,
       i.e. the SYN bit, set.

       To match locally administered unicast ethernet addresses you can use:

           eth.addr[0] & 0x0f == 2

       When using slices, the bit mask must be specified as a byte string, and it must have the
       same number of bytes as the slice itself, as in:

           ip[42:2] & 40:ff

   Arithmetic operators
       Arithmetic expressions are supported with the usual operators:

           +   Addition
           -   Subtraction
           *   Multiplication
           /   Division
           %   Modulo (integer remainder)

       For example it is possible to filter for UDP destination ports greater or equal by one to
       the source port with the expression:

           udp.dstport >= udp.srcport + 1

       It is possible to group arithmetic expressions using curly brackets (parenthesis will not
       work for this):

           tcp.dstport >= 4 * {tcp.srcport + 3}

       Do not confuse this usage of curly brackets with set membership.

       An unfortunate quirk in the filter syntax is that the subtraction operator must be
       preceded by a space character, so "A-B" must be written as "A -B" or "A - B".

   Protocol field references
       A variable using a sigil with the form ${some.proto.field} is called a field reference. A
       field reference is a field value read from the currently selected frame in the GUI. This
       is useful to build dynamic filters such as, frames since the last five minutes to the
       selected frame:

           frame.time_relative >= ${frame.time_relative} - 300

       Field references share a similar notation to macros but are distinct syntactical elements
       in the filter language.

   Logical expressions
       Tests can be combined using logical expressions. These too are expressible in C-like
       syntax or with English-like abbreviations. The following table lists the logical operators
       from highest to lowest precedence:

           not, ! Logical NOT   (right-associative)
           and, &&   Logical AND   (left-associative)
           or,  ||   Logical OR    (left-associative)

       The evaluation is always performed left to right. Expressions can be grouped by
       parentheses as well. The expression "A and B or not C or D and not E or F" is read:

           (A and B) or (not C) or (D and (not E)) or F

       It’s usually better to be explicit about grouping using parenthesis. The following are all
       valid display filter expressions:

           tcp.port == 80 and ip.src == 192.168.2.1
           not llc
           http and frame[100-199] contains "wireshark"
           (ipx.src.net == 0xbad && ipx.src.node == 0.0.0.0.0.1) || ip

       Remember that whenever a protocol or field name occurs in an expression, the "exists"
       operator is implicitly called. The "exists" operator has the highest priority. This means
       that the first filter expression must be read as "show me the packets for which tcp.port
       exists and equals 80, and ip.src exists and equals 192.168.2.1". The second filter
       expression means "show me the packets where not exists llc", or in other words "where llc
       does not exist" and hence will match all packets that do not contain the llc protocol. The
       third filter expression includes the constraint that offset 199 in the frame exists, in
       other words the length of the frame is at least 200.

       Each comparison has an implicit exists test for any field value. Care must be taken when
       using the display filter to remove noise from the packet trace. If, for example, you want
       to filter out all IP multicast packets to address 224.1.2.3, then using:

           ip.dst ne 224.1.2.3

       may be too restrictive. This is the same as writing:

           ip.dst and ip.dst ne 224.1.2.3

       The filter selects only frames that have the "ip.dst" field. Any other frames, including
       all non-IP packets, will not be displayed. To display the non-IP packets as well, you can
       use one of the following two expressions:

           not ip.dst or ip.dst ne 224.1.2.3
           not ip.dst eq 224.1.2.3

       The first filter uses "not ip.dst" to include all non-IP packets and then lets "ip.dst ne
       224.1.2.3" filter out the unwanted IP packets. The second filter also negates the implicit
       existance test and so is a shorter way to write the first.

FILTER FIELD REFERENCE

       The entire list of display filters is too large to list here. You can can find references
       and examples at the following locations:

       •   The online Display Filter Reference: https://www.wireshark.org/docs/dfref/

       •   View:Internals:Supported Protocols in Wireshark

       •   tshark -G fields on the command line

       •   The Wireshark wiki: https://gitlab.com/wireshark/wireshark/-/wikis/DisplayFilters

NOTES

       The wireshark-filter(4) manpage is part of the Wireshark distribution. The latest version
       of Wireshark can be found at https://www.wireshark.org.

       Regular expressions in the "matches" operator are provided by the PCRE2 library. See
       https://www.pcre.org/ for more information.

       This manpage does not describe the capture filter syntax, which is different. See the
       manual page of pcap-filter(7) or, if that doesn’t exist, tcpdump(8), or, if that doesn’t
       exist, https://gitlab.com/wireshark/wireshark/-/wikis/CaptureFilters for a description of
       capture filters.

       Display Filters are also described in the User’s Guide:
       https://www.wireshark.org/docs/wsug_html_chunked/ChWorkBuildDisplayFilterSection.html

SEE ALSO

       wireshark(1), tshark(1), editcap(1), pcap(3), pcap-filter(7) or tcpdump(8) if it doesn’t
       exist.

AUTHORS

       See the list of authors in the Wireshark man page for a list of authors of that code.

                                            2023-08-24                        WIRESHARK-FILTER(4)