Provided by: lvm2_2.03.16-2ubuntu1_amd64 bug

NAME

       lvmconfig — Display and manipulate configuration information

SYNOPSIS

       lvmconfig
           [ option_args ]
           [ position_args ]

DESCRIPTION

       lvmconfig,  lvm  config,  lvm  dumpconfig  (for  compatibility  reasons, to be phased out)
       produce formatted output from the LVM configuration tree. The sources of the configuration
       data include lvm.conf(5) and command line settings from --config.

USAGE

       lvmconfig
           [ -f|--file String ]
           [ -l|--list ]
           [    --atversion String ]
           [    --typeconfig current|default|diff|full|list|missing|new|profilable|
           profilable-command|profilable-metadata ]
           [    --ignoreadvanced ]
           [    --ignoreunsupported ]
           [    --ignorelocal ]
           [    --mergedconfig ]
           [    --metadataprofile String ]
           [    --sinceversion String ]
           [    --showdeprecated ]
           [    --showunsupported ]
           [    --validate ]
           [    --withsummary ]
           [    --withcomments ]
           [    --withgeneralpreamble ]
           [    --withlocalpreamble ]
           [    --withspaces ]
           [    --unconfigured ]
           [    --withversions ]
           [ COMMON_OPTIONS ]
           [ String ... ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --atversion String
              Specify an LVM version in x.y.z format where x is the major version, the y  is  the
              minor  version  and  z  is  the  patchlevel  (e.g. 2.2.106).  When configuration is
              displayed, the configuration settings  recognized  at  this  LVM  version  will  be
              considered  only.  This  can  be used to display a configuration that a certain LVM
              version understands and which does not contain any newer  settings  for  which  LVM
              would issue a warning message when checking the configuration.

       --commandprofile String
              The  command  profile  to  use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf(5) settings.   The  String
              arg  uses  the  same  format  as lvm.conf(5), or may use section/field syntax.  See
              lvm.conf(5) for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of  messages  sent
              to the log file and/or syslog (if configured).

       --devices PV
              Restricts  the devices that are visible and accessible to the command.  Devices not
              listed will appear to be missing. This option can be repeated, or accepts  a  comma
              separated list of devices. This overrides the devices file.

       --devicesfile String
              A   file   listing   devices   that  LVM  should  use.   The  file  must  exist  in
              /etc/lvm/devices/ and is managed with the lvmdevices(8)  command.   This  overrides
              the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If  set  to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       -f|--file String
              Write output to the named file.

       -h|--help
              Display help text.

       --ignoreadvanced
              Exclude advanced configuration settings from the output.

       --ignorelocal
              Ignore the local section. The local section should be defined in the  lvmlocal.conf
              file,  and  should  contain config settings specific to the local host which should
              not be copied to other hosts.

       --ignoreunsupported
              Exclude unsupported configuration settings from  the  output.  These  settings  are
              either used for debugging and development purposes only or their support is not yet
              complete and they are not meant to be used in  production.  The  current  and  diff
              types  include unsupported settings in their output by default, all the other types
              ignore unsupported settings.

       --journal String
              Record information in the systemd journal.  This  information  is  in  addition  to
              information   enabled   by  the  lvm.conf  log/journal  setting.   command:  record
              information about the command.  output: record the default command output.   debug:
              record full command debugging.

       -l|--list
              List  config  settings  with summarizing comment. This is the same as using options
              --typeconfig list --withsummary.

       --lockopt String
              Used to pass options for special cases  to  lvmlockd.   See  lvmlockd(8)  for  more
              information.

       --longhelp
              Display long help text.

       --mergedconfig
              When   the   command  is  run  with  --config  and/or  --commandprofile  (or  using
              LVM_COMMAND_PROFILE environment variable), --profile, or  --metadataprofile,  merge
              all  the  contents  of the "config cascade" before displaying it.  Without merging,
              only the configuration at the front of the cascade is displayed.   See  lvm.conf(5)
              for more information about config.

       --metadataprofile String
              The  metadata  profile  to use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --nohints
              Do not use the hints file to locate devices  for  PVs.  A  command  may  read  more
              devices  to  find  PVs  when  hints  are  not  used. The command will still perform
              standard hint file invalidation where appropriate.

       --nolocking
              Disable locking. Use  with  caution,  concurrent  commands  may  produce  incorrect
              results.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress  output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --showdeprecated
              Include deprecated  configuration  settings  in  the  output.  These  settings  are
              deprecated  after  a  certain  version.  If  a  concrete  version is specified with
              --atversion, deprecated  settings  are  automatically  included  if  the  specified
              version  is  lower  than  the  version  in  which the settings were deprecated. The
              current and diff types include deprecated settings in their output by default,  all
              the other types ignore deprecated settings.

       --showunsupported
              Include unsupported configuration settings in the output. These settings are either
              used for debugging or development purposes  only,  or  their  support  is  not  yet
              complete  and  they  are  not  meant to be used in production. The current and diff
              types include unsupported settings in their output by default, all the other  types
              ignore unsupported settings.

       --sinceversion String
              Specify  an  LVM version in x.y.z format where x is the major version, the y is the
              minor version and z is the patchlevel (e.g. 2.2.106).   This  option  is  currently
              applicable  only  with  --typeconfig  new  to  display  all  configuration settings
              introduced since given version.

       -t|--test
              Run in test mode. Commands will  not  update  metadata.   This  is  implemented  by
              disabling  all  metadata  writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage  operations  if  a
              tool relies on reading back metadata it believes has changed but hasn't.

       --typeconfig current|default|diff|full|list|missing|new|profilable|profilable-command|
              profilable-metadata
              current prints the config  settings  that  would  be  applied  to  an  lvm  command
              (assuming  the  command does not override them on the command line.) This includes:
              settings that have been modified in lvm  config  files,  settings  that  get  their
              default  values  from config files, and default settings that have been uncommented
              in config files.  default prints all settings with their default  values.   Changes
              made  in lvm config files are not reflected in the output.  Some settings get their
              default values internally, and these  settings  are  printed  as  comments.   Other
              settings  get  their  default  values from config files, and these settings are not
              printed as comments.  diff prints only config settings that have been modified from
              their  default values in config files (the difference between current and default.)
              full prints every setting uncommented and set to the current  value,  i.e.  how  it
              would  be used by an lvm command.  This includes settings modified in config files,
              settings that usually get defaults internally, and settings that get defaults  from
              config  files.   list  prints  all  config  names  without  values.  missing prints
              settings that are missing from the lvm config files. A missing setting that usually
              gets  its  default from config files is printed uncommented and set to the internal
              default.  Settings that get their default internally and  are  not  set  in  config
              files  are printed commented with the internal default.  new prints config settings
              that have been added since the lvm version specified by  --sinceversion.  They  are
              printed  with  their default values.  profilable prints settings with their default
              values that can be set from a profile.   profilable-command  prints  settings  with
              their  default  values that can be set from a command profile.  profilable-metadata
              prints settings with their default values that can be set from a metadata  profile.
              Also see lvm.conf(5).

       --unconfigured
              Internal option used for generating config file during build.

       --validate
              Validate  current  configuration  used  and  exit with appropriate return code. The
              validation is done only for the configuration at the front of the "config cascade".
              To  validate  the  whole  merged  configuration tree, also use --mergedconfig.  The
              validation is done even if lvm.conf(5) config/checks is disabled.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       --withcomments
              Display  a  full comment for each configuration node. For deprecated settings, also
              display comments about deprecation.

       --withgeneralpreamble
              Include general config file preamble.

       --withlocalpreamble
              Include local config file preamble.

       --withspaces
              Where appropriate, add more spaces in output for better readability.

       --withsummary
              Display a one line comment for each configuration node.

       --withversions
              Also  display  a  comment  containing  the  version  of   introduction   for   each
              configuration  node.  If  the setting is deprecated, also display the version since
              which it is deprecated.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes.  Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       String See the option description for information about the string content.

       Size[UNIT]
              Size  is  an  input  number  that accepts an optional unit.  Input units are always
              treated as base two values, regardless of capitalization, e.g.  'k'  and  'K'  both
              refer  to  1024.  The default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: b|B is bytes, s|S  is  sectors  of  512
              bytes,  k|K  is  KiB,  m|M  is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
              (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See  lvm(8)  for  information  about  environment  variables  used  by  lvm.  For example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8),
       pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
       vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
       vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8),
       lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)