Provided by: lvm2_2.03.16-2ubuntu1_amd64 bug

NAME

       vgmknodes — Create the special files for volume group devices in /dev

SYNOPSIS

       vgmknodes
           [ option_args ]
           [ position_args ]

DESCRIPTION

       vgmknodes  checks  the LVM device nodes in /dev that are needed for active LVs and creates
       any that are missing and removes unused ones.

       This command should not usually be needed if all the system components are  interoperating
       correctly.

USAGE

       vgmknodes
           [    --ignorelockingfailure ]
           [    --refresh ]
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]
           [ VG|LV|Tag ... ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --commandprofile String
              The  command  profile  to  use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf(5) settings.   The  String
              arg  uses  the  same  format  as lvm.conf(5), or may use section/field syntax.  See
              lvm.conf(5) for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of  messages  sent
              to the log file and/or syslog (if configured).

       --devices PV
              Restricts  the devices that are visible and accessible to the command.  Devices not
              listed will appear to be missing. This option can be repeated, or accepts  a  comma
              separated list of devices. This overrides the devices file.

       --devicesfile String
              A   file   listing   devices   that  LVM  should  use.   The  file  must  exist  in
              /etc/lvm/devices/ and is managed with the lvmdevices(8)  command.   This  overrides
              the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If  set  to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       -h|--help
              Display help text.

       --ignorelockingfailure
              Allows a command to continue  with  read-only  metadata  operations  after  locking
              failures.

       --journal String
              Record  information  in  the  systemd  journal.  This information is in addition to
              information  enabled  by  the  lvm.conf  log/journal  setting.    command:   record
              information  about the command.  output: record the default command output.  debug:
              record full command debugging.

       --lockopt String
              Used to pass options for special cases  to  lvmlockd.   See  lvmlockd(8)  for  more
              information.

       --longhelp
              Display long help text.

       --nohints
              Do  not  use  the  hints  file  to  locate devices for PVs. A command may read more
              devices to find PVs when hints  are  not  used.  The  command  will  still  perform
              standard hint file invalidation where appropriate.

       --nolocking
              Disable  locking.  Use  with  caution,  concurrent  commands  may produce incorrect
              results.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once  to
              also suppress any prompts with answer 'no'.

       --refresh
              If  the  LV  is  active,  reload  its  metadata.   This  is not necessary in normal
              operation, but may be useful if something has gone wrong, or if some form of manual
              LV sharing is being used.

       --reportformat basic|json
              Overrides  current  output  format  for  reports  which  is defined globally by the
              report/output_format setting in lvm.conf(5).  basic is  the  original  format  with
              columns  and  rows.   If  there is more than one report per command, each report is
              prefixed with the report name for identification. json produces  report  output  in
              JSON format. See lvmreport(7) for more information.

       -t|--test
              Run  in  test  mode.  Commands  will  not  update metadata.  This is implemented by
              disabling all metadata writing but nevertheless returning success  to  the  calling
              function.  This  may  lead to unusual error messages in multi-stage operations if a
              tool relies on reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do  not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       VG     Volume Group name.  See lvm(8) for valid names.

       LV     Logical Volume name.  See lvm(8) for valid names.  An LV positional  arg  generally
              includes the VG name and LV name, e.g. VG/LV.

       Tag    Tag  name.  See lvm(8) for information about tag names and using tags in place of a
              VG, LV or PV.

       String See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional  unit.   Input  units  are  always
              treated  as  base  two  values, regardless of capitalization, e.g. 'k' and 'K' both
              refer to 1024.  The default input unit is specified by letter, followed  by  |UNIT.
              UNIT  represents  other  possible  input units: b|B is bytes, s|S is sectors of 512
              bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P  is  PiB,  e|E  is  EiB.
              (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See lvm(8) for  information  about  environment  variables  used  by  lvm.   For  example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8),
       pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
       vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
       vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8),
       lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)