Provided by: dwz_0.15-1build6_amd64 bug

NAME

       dwz - DWARF optimization and duplicate removal tool

SYNOPSIS

       dwz [OPTION...] [FILES]

DESCRIPTION

       dwz  is  a  program that attempts to optimize DWARF debugging information contained in ELF
       shared  libraries  and  ELF  executables  for  size,  by   replacing   DWARF   information
       representation  with  equivalent smaller representation where possible and by reducing the
       amount of  duplication  using  techniques  from  DWARF  standard  appendix  E  -  creating
       DW_TAG_partial_unit   compilation   units  (CUs)  for  duplicated  information  and  using
       DW_TAG_imported_unit to import it into each CU that needs it.

       The tool handles DWARF 32-bit format debugging sections of  versions  2,  3,  4,  most  of
       version  5 and GNU extensions on top of those.  It is strongly recommended to use at least
       DWARF 3, but using DWARF 4 or higher will work much better.

       While most of DWARF  5  is  supported  dwz  doesn't  yet  generate  spec  compliant  DWARF
       Supplementary  Object  Files (DWARF 5, section 7.3.6) unless the --dwarf-5 option is used.
       Instead of a .debug_sup section it will generate by default a  .gnu_debugaltlink  section.
       And   it   will   use   the   DW_FORM_GNU_strp_alt  and  DW_FORM_GNU_reg_alt,  instead  of
       DW_FORM_strp_sup and DW_FORM_ref_sup to keep compatibility with existing DWARF consumers.

       DWARF 4 .debug_types are supported,  but  DWARF  5  DW_UT_type  units  are  not.  Likewise
       .gdb_index is supported, but the DWARF 5 .debug_names is not. Also some forms and sections
       that  are  only  emitted  by  GCC  when   generating   Split   DWARF,   DW_FORM_strx   and
       .debug_str_offsets, DW_FORM_addrx and .debug_addr, DW_FORM_rnglistx and DW_FORM_loclistsx,
       are not supported yet.

       The tool has two main modes of operation, without the -m option it  attempts  to  optimize
       DWARF   debugging  information  in  each  given  object  (executable  or  shared  library)
       individually, with the -m option it afterwards attempts to optimize even  more  by  moving
       DWARF  debugging  information entries (DIEs), strings and macro descriptions duplicated in
       more than one object into a newly created ELF ET_REL object whose filename is given as  -m
       option  argument.  The debug sections in the executables and shared libraries specified on
       the command line are then modified again, referring to the entities in the  newly  created
       object.

OPTIONS

       -m FILE --multifile FILE
              Multifile  mode.   After  processing  all  named  executables and shared libraries,
              attempt to create ELF object FILE and put debugging information duplicated in  more
              than  one object there, afterwards optimize each named executable or shared library
              even further if possible.

       -h --hardlink
              Look for executables or shared libraries hardlinked together, instead of  rewriting
              them  individually  rewrite just one of them and hardlink the rest to the first one
              again.

       -M NAME --multifile-name NAME
              Specify the name of the common file that should be put into  the  .gnu_debugaltlink
              section alongside with its build ID.  By default dwz puts there the argument of the
              -m option.

       -r --relative
              Specify that the name of the common file  to  be  put  into  the  .gnu_debugaltlink
              section  is  supposed  to  be  relative  path  from  the  directory  containing the
              executable or shared library to the file named in the argument of  the  -m  option.
              Either -M or -r option can be specified, but not both.

       -p N --multifile-pointer-size <N|auto|native>
              Specify the pointer size of the multifile, in bytes.  If auto, use the pointer size
              of the files, provided  they  match.   If  native,  use  native  pointer  size,  as
              specified in the help message.

       -p <l|b|auto> --multifile-endian <l|b|auto|native>
              Specify  the  endianity of the multifile.  If auto, use the endianity of the files,
              provided they match.  If native, use native endianity, as  specified  in  the  help
              message.

       -q --quiet
              Silence up some of the most common messages.

       -o FILE --output FILE
              This  option  instructs  dwz not to overwrite the specified file, but instead store
              the new content into FILE.  Nothing is written if  dwz  exits  with  non-zero  exit
              code.  Can be used only with a single executable or shared library (if there are no
              arguments at all, a.out is assumed).

       -l <COUNT|none> --low-mem-die-limit <COUNT|none>
              Handle executables  or  shared  libraries  containing  more  than  COUNT  debugging
              information  entries  in  their  .debug_info section using a slower and more memory
              usage friendly mode and don't attempt to optimize that object  in  multifile  mode.
              The  default  is  10  million DIEs.  There is a risk that for very large amounts of
              debugging information in a single shared library or executable there might  not  be
              enough  memory  (especially  when  dwz  tool  is 32-bit binary, it might run out of
              available virtual address space even sooner).  Specifying none as argument disables
              the limit.

       -L <COUNT|none> --max-die-limit <COUNT|none>
              Don't  attempt  to  optimize  executables  or shared libraries containing more than
              COUNT DIEs at all.  The default is 50 million DIEs.  Specifying  none  as  argument
              disables the limit.

       -5 --dwarf-5
              Emit  standard DWARF 5 Supplementary Object Files with .debug_sup and corresponding
              forms, instead of the GNU extension .gnu_debugaltlink and corresponding forms.

       -j <N> --jobs <N>
              Process N files in parallel.   The  default  is  processors  /  2.   Disabled  when
              multifile is used.

       --odr / --no-odr
              Experimental.   Enable/disable One-Definition-Rule optimization for C++ compilation
              units.  This optimization causes struct/union/class DIEs with the same name  to  be
              considered  equal.   This  has  the  effect  that  DIEs  referring to distinct DIEs
              representing the same type (like f.i. pointer type DIEs) are considered equal,  and
              may  be  deduplicated.   The  status  of  this  optimization is experimental.  It's
              disabled in low-mem mode.  Disabled by default.

       --odr-mode=<basic|link>
              Set the One-Definition-Rule optimization aggressiveness: basic or link.  When using
              the  link  setting,  the  optimization  will  attempt  to replace declarations of a
              struct/union/class with a corresponding definition.  When using the basic  setting,
              that  part  of the optimization is disabled.  In normal operation, the link setting
              should be used.  The basic setting is provided only as fallback in case of problems
              with the link setting.  Set to link by default.

       --import-optimize / --no-import-optimize
              Enable/disable  optimization  that  reduces the number of DW_TAG_imported_unit DIEs
              generated to import the partial units created by dwz.  Disabling  the  optimization
              can  be  used  to work around problems in the optimization, or to make it easier to
              observe which CU imports which PU.  Enabled by default.

       -? --help
              Print short help and exit.

       -v --version
              Print version number and short licensing notice and exit.

ARGUMENTS

       Command-line arguments should be the executables, shared libraries or  their  stripped  to
       file separate debug information objects.

EXAMPLES

              $ dwz -m .dwz/foobar-1.2.debug -rh \
                bin/foo.debug bin/foo2.debug foo/lib/libbar.so.debug
       will  attempt  to  optimize  debugging  information  in  bin/foo.debug, bin/foo2.debug and
       lib/libbar.so.debug (by modifying the files in place) and when beneficial also will create
       .dwz/foobar-1.2.debug  file.   .gnu_debugaltlink section in the first two files will refer
       to ../.dwz/foobar-1.2.debug and in the last file to ../../.dwz/foobar-1.2.debug.  If  e.g.
       bin/foo.debug  and  bin/foo2.debug  were  hardlinked  together  initially,  they  will  be
       hardlinked again and for multifile optimizations considered just as a single  file  rather
       than two.
              $ dwz -o foo.dwz foo
       will  not modify foo but instead store the ELF object with optimized debugging information
       if successful into foo.dwz file it creates.
              $ dwz *.debug foo/*.debug
       will  attempt  to  optimize  debugging  information  in  *.debug  and  foo/*.debug  files,
       optimizing each file individually in place.
              $ dwz
       is equivalent to dwz a.out command.

SEE ALSO

       http://dwarfstd.org/doc/DWARF4.pdf , http://dwarfstd.org/doc/DWARF5.pdf , gdb(1).

AUTHORS

       Jakub   Jelinek   <jakub@redhat.com>,  Tom  de  Vries  <tdevries@suse.de>,  Mark  Wielaard
       <mark@klomp.org>

BUGS

       Use   the   Bugzilla   link   of   the   project   web   page   or   our   mailing   list.
       https://sourceware.org/dwz/, <dwz@sourceware.org>.

                                           15 Feb 2021                                     dwz(1)