Provided by: dahdi_3.1.0-2build1_amd64 bug

NAME

       dahdi_test — Test if the DAHDI timer provides timely response

SYNOPSIS

       dahdi_test [ -v ]

DESCRIPTION

       dahdi_test  dahdi_test  runs  a  timing test in a loop and prints the result of each loop.
       The test is as follows:

       It reads 8192 bytes from the DAHDI timer device  (/dev/dahdi/pseudo).   This  should  take
       exactly  8000  ms  .  It uses calls to gettimeofday(2) before and after that read to check
       that indeed exactly 8000ms have passed.

       Values of 100% and 99.99% Are normally considered a definite pass.  Values of  99.98%  and
       99.97% are probably OK as well.

OPTIONS

       -v
              Be more verbose: print one line per test.

       -c count
              Run for count times instead of running forever.

FILES

       /dev/dahdi/pseudo
       The device file used to access the DAHDI timer.

SEE ALSO

       dahdi_tool(8), dahdi_cfg(8), asterisk(8). gettimeofday(2)

AUTHOR

       This  manual  page  was  written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> Permission is
       granted to copy, distribute and/or modify this document under the terms of the GNU General
       Public License, Version 2 any later version published by the Free Software Foundation.

                                            2005-06-25                              dahdi_test(8)