Provided by: debhelper_9.20131227ubuntu1_all 
NAME
debhelper - the debhelper tool suite
SYNOPSIS
dh_* [-v] [-a] [-i] [-s] [--no-act] [-ppackage] [-Npackage] [-Ptmpdir]
DESCRIPTION
Debhelper is used to help you build a Debian package. The philosophy behind debhelper is
to provide a collection of small, simple, and easily understood tools that are used in
debian/rules to automate various common aspects of building a package. This means less
work for you, the packager. It also, to some degree means that these tools can be changed
if Debian policy changes, and packages that use them will require only a rebuild to comply
with the new policy.
A typical debian/rules file that uses debhelper will call several debhelper commands in
sequence, or use dh(1) to automate this process. Examples of rules files that use
debhelper are in /usr/share/doc/debhelper/examples/
To create a new Debian package using debhelper, you can just copy one of the sample rules
files and edit it by hand. Or you can try the dh-make package, which contains a dh_make
command that partially automates the process. For a more gentle introduction, the maint-
guide Debian package contains a tutorial about making your first package using debhelper.
DEBHELPER COMMANDS
Here is the list of debhelper commands you can use. See their man pages for additional
documentation.
dh_auto_build(1)
automatically builds a package
dh_auto_clean(1)
automatically cleans up after a build
dh_auto_configure(1)
automatically configure a package prior to building
dh_auto_install(1)
automatically runs make install or similar
dh_auto_test(1)
automatically runs a package's test suites
dh_bugfiles(1)
install bug reporting customization files into package build directories
dh_builddeb(1)
build Debian binary packages
dh_clean(1)
clean up package build directories
dh_compress(1)
compress files and fix symlinks in package build directories
dh_fixperms(1)
fix permissions of files in package build directories
dh_gconf(1)
install GConf defaults files and register schemas
dh_gencontrol(1)
generate and install control file
dh_icons(1)
Update caches of Freedesktop icons
dh_install(1)
install files into package build directories
dh_installcatalogs(1)
install and register SGML Catalogs
dh_installchangelogs(1)
install changelogs into package build directories
dh_installcron(1)
install cron scripts into etc/cron.*
dh_installdeb(1)
install files into the DEBIAN directory
dh_installdebconf(1)
install files used by debconf in package build directories
dh_installdirs(1)
create subdirectories in package build directories
dh_installdocs(1)
install documentation into package build directories
dh_installemacsen(1)
register an Emacs add on package
dh_installexamples(1)
install example files into package build directories
dh_installgsettings(1)
install GSettings overrides and set dependencies
dh_installifupdown(1)
install if-up and if-down hooks
dh_installinfo(1)
install info files
dh_installinit(1)
install service init files into package build directories
dh_installlogcheck(1)
install logcheck rulefiles into etc/logcheck/
dh_installlogrotate(1)
install logrotate config files
dh_installman(1)
install man pages into package build directories
dh_installmenu(1)
install Debian menu files into package build directories
dh_installmime(1)
install mime files into package build directories
dh_installmodules(1)
register kernel modules
dh_installpam(1)
install pam support files
dh_installppp(1)
install ppp ip-up and ip-down files
dh_installudev(1)
install udev rules files
dh_installwm(1)
register a window manager
dh_installxfonts(1)
register X fonts
dh_link(1)
create symlinks in package build directories
dh_lintian(1)
install lintian override files into package build directories
dh_listpackages(1)
list binary packages debhelper will act on
dh_makeshlibs(1)
automatically create shlibs file and call dpkg-gensymbols
dh_md5sums(1)
generate DEBIAN/md5sums file
dh_movefiles(1)
move files out of debian/tmp into subpackages
dh_perl(1)
calculates Perl dependencies and cleans up after MakeMaker
dh_prep(1)
perform cleanups in preparation for building a binary package
dh_shlibdeps(1)
calculate shared library dependencies
dh_strip(1)
strip executables, shared libraries, and some static libraries
dh_testdir(1)
test directory before building Debian package
dh_testroot(1)
ensure that a package is built as root
dh_ucf(1)
register configuration files with ucf
dh_usrlocal(1)
migrate usr/local directories to maintainer scripts
Deprecated Commands
A few debhelper commands are deprecated and should not be used.
dh_desktop(1)
deprecated no-op
dh_installmanpages(1)
old-style man page installer (deprecated)
dh_scrollkeeper(1)
deprecated no-op
dh_suidregister(1)
suid registration program (deprecated)
dh_undocumented(1)
undocumented.7 symlink program (deprecated no-op)
Other Commands
If a program's name starts with dh_, and the program is not on the above lists, then it is
not part of the debhelper package, but it should still work like the other programs
described on this page.
DEBHELPER CONFIG FILES
Many debhelper commands make use of files in debian/ to control what they do. Besides the
common debian/changelog and debian/control, which are in all packages, not just those
using debhelper, some additional files can be used to configure the behavior of specific
debhelper commands. These files are typically named debian/package.foo (where package of
course, is replaced with the package that is being acted on).
For example, dh_installdocs uses files named debian/package.docs to list the documentation
files it will install. See the man pages of individual commands for details about the
names and formats of the files they use. Generally, these files will list files to act
on, one file per line. Some programs in debhelper use pairs of files and destinations or
slightly more complicated formats.
Note for the first (or only) binary package listed in debian/control, debhelper will use
debian/foo when there's no debian/package.foo file.
In some rare cases, you may want to have different versions of these files for different
architectures or OSes. If files named debian/package.foo.ARCH or debian/package.foo.OS
exist, where ARCH and OS are the same as the output of "dpkg-architecture -qDEB_HOST_ARCH"
/ "dpkg-architecture -qDEB_HOST_ARCH_OS", then they will be used in preference to other,
more general files.
Mostly, these config files are used to specify lists of various types of files.
Documentation or example files to install, files to move, and so on. When appropriate, in
cases like these, you can use standard shell wildcard characters (? and * and [..]
character classes) in the files. You can also put comments in these files; lines
beginning with # are ignored.
The syntax of these files is intentionally kept very simple to make them easy to read,
understand, and modify. If you prefer power and complexity, you can make the file
executable, and write a program that outputs whatever content is appropriate for a given
situation. When you do so, the output is not further processed to expand wildcards or
strip comments.
SHARED DEBHELPER OPTIONS
The following command line options are supported by all debhelper programs.
-v, --verbose
Verbose mode: show all commands that modify the package build directory.
--no-act
Do not really do anything. If used with -v, the result is that the command will output
what it would have done.
-a, --arch
Act on architecture dependent packages that should be built for the build
architecture.
-i, --indep
Act on all architecture independent packages.
-ppackage, --package=package
Act on the package named package. This option may be specified multiple times to make
debhelper operate on a given set of packages.
-s, --same-arch
This used to be a smarter version of the -a flag, but the -a flag is now equally
smart.
-Npackage, --no-package=package
Do not act on the specified package even if an -a, -i, or -p option lists the package
as one that should be acted on.
--remaining-packages
Do not act on the packages which have already been acted on by this debhelper command
earlier (i.e. if the command is present in the package debhelper log). For example,
if you need to call the command with special options only for a couple of binary
packages, pass this option to the last call of the command to process the rest of
packages with default settings.
--ignore=file
Ignore the specified file. This can be used if debian/ contains a debhelper config
file that a debhelper command should not act on. Note that debian/compat,
debian/control, and debian/changelog can't be ignored, but then, there should never be
a reason to ignore those files.
For example, if upstream ships a debian/init that you don't want dh_installinit to
install, use --ignore=debian/init
-Ptmpdir, --tmpdir=tmpdir
Use tmpdir for package build directory. The default is debian/package
--mainpackage=package
This little-used option changes the package which debhelper considers the "main
package", that is, the first one listed in debian/control, and the one for which
debian/foo files can be used instead of the usual debian/package.foo files.
-O=option|bundle
This is used by dh(1) when passing user-specified options to all the commands it runs.
If the command supports the specified option or option bundle, it will take effect. If
the command does not support the option (or any part of an option bundle), it will be
ignored.
COMMON DEBHELPER OPTIONS
The following command line options are supported by some debhelper programs. See the man
page of each program for a complete explanation of what each option does.
-n Do not modify postinst, postrm, etc. scripts.
-Xitem, --exclude=item
Exclude an item from processing. This option may be used multiple times, to exclude
more than one thing. The \fIitem\fR is typically part of a filename, and any file
containing the specified text will be excluded.
-A, --all
Makes files or other items that are specified on the command line take effect in ALL
packages acted on, not just the first.
BUILD SYSTEM OPTIONS
The following command line options are supported by all of the dh_auto_* debhelper
programs. These programs support a variety of build systems, and normally heuristically
determine which to use, and how to use them. You can use these command line options to
override the default behavior. Typically these are passed to dh(1), which then passes
them to all the dh_auto_* programs.
-Sbuildsystem, --buildsystem=buildsystem
Force use of the specified buildsystem, instead of trying to auto-select one which
might be applicable for the package.
-Ddirectory, --sourcedirectory=directory
Assume that the original package source tree is at the specified directory rather than
the top level directory of the Debian source package tree.
-B[directory], --builddirectory=[directory]
Enable out of source building and use the specified directory as the build directory.
If directory parameter is omitted, a default build directory will chosen.
If this option is not specified, building will be done in source by default unless the
build system requires or prefers out of source tree building. In such a case, the
default build directory will be used even if --builddirectory is not specified.
If the build system prefers out of source tree building but still allows in source
building, the latter can be re-enabled by passing a build directory path that is the
same as the source directory path.
--parallel
Enable parallel builds if underlying build system supports them. The number of
parallel jobs is controlled by the DEB_BUILD_OPTIONS environment variable ("Debian
Policy, section 4.9.1") at build time. It might also be subject to a build system
specific limit.
If this option is not specified, debhelper currently defaults to not allowing parallel
package builds.
--max-parallel=maximum
This option implies --parallel and allows further limiting the number of jobs that can
be used in a parallel build. If the package build is known to only work with certain
levels of concurrency, you can set this to the maximum level that is known to work, or
that you wish to support.
--list, -l
List all build systems supported by debhelper on this system. The list includes both
default and third party build systems (marked as such). Also shows which build system
would be automatically selected, or which one is manually specified with the
--buildsystem option.
COMPATIBILITY LEVELS
From time to time, major non-backwards-compatible changes need to be made to debhelper, to
keep it clean and well-designed as needs change and its author gains more experience. To
prevent such major changes from breaking existing packages, the concept of debhelper
compatibility levels was introduced. You tell debhelper which compatibility level it
should use, and it modifies its behavior in various ways.
Tell debhelper what compatibility level to use by writing a number to debian/compat. For
example, to turn on v9 mode:
% echo 9 > debian/compat
Your package will also need a versioned build dependency on a version of debhelper equal
to (or greater than) the compatibility level your package uses. So for compatibility level
9, ensure debian/control has:
Build-Depends: debhelper (>= 9)
Unless otherwise indicated, all debhelper documentation assumes that you are using the
most recent compatibility level, and in most cases does not indicate if the behavior is
different in an earlier compatibility level, so if you are not using the most recent
compatibility level, you're advised to read below for notes about what is different in
earlier compatibility levels.
These are the available compatibility levels:
v1 This is the original debhelper compatibility level, and so it is the default one. In
this mode, debhelper will use debian/tmp as the package tree directory for the first
binary package listed in the control file, while using debian/package for all other
packages listed in the control file.
This mode is deprecated.
v2 In this mode, debhelper will consistently use debian/package as the package tree
directory for every package that is built.
This mode is deprecated.
v3 This mode works like v2, with the following additions:
- Debhelper config files support globbing via * and ?, when appropriate. To turn
this off and use those characters raw, just prefix with a backslash.
- dh_makeshlibs makes the postinst and postrm scripts call ldconfig.
- Every file in etc/ is automatically flagged as a conffile by dh_installdeb.
This mode is deprecated.
v4 Changes from v3 are:
- dh_makeshlibs -V will not include the Debian part of the version number in the
generated dependency line in the shlibs file.
- You are encouraged to put the new ${misc:Depends} into debian/control to
supplement the ${shlibs:Depends} field.
- dh_fixperms will make all files in bin/ directories and in etc/init.d
executable.
- dh_link will correct existing links to conform with policy.
This mode is deprecated.
v5 Changes from v4 are:
- Comments are ignored in debhelper config files.
- dh_strip --dbg-package now specifies the name of a package to put debugging
symbols in, not the packages to take the symbols from.
- dh_installdocs skips installing empty files.
- dh_install errors out if wildcards expand to nothing.
v6 Changes from v5 are:
- Commands that generate maintainer script fragments will order the fragments in
reverse order for the prerm and postrm scripts.
- dh_installwm will install a slave manpage link for x-window-manager.1.gz, if
it sees the man page in usr/share/man/man1 in the package build directory.
- dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE,
if it was set to a list of things to exclude, such as CVS:.svn:.git. Now it
does.
- dh_installman allows overwriting existing man pages in the package build
directory. In previous compatibility levels it silently refuses to do this.
v7 Changes from v6 are:
- dh_install, will fall back to looking for files in debian/tmp if it doesn't
find them in the current directory (or wherever you tell it look using
--sourcedir). This allows dh_install to interoperate with dh_auto_install,
which installs to debian/tmp, without needing any special parameters.
- dh_clean will read debian/clean and delete files listed there.
- dh_clean will delete toplevel *-stamp files.
- dh_installchangelogs will guess at what file is the upstream changelog if none
is specified.
v8 Changes from v7 are:
- Commands will fail rather than warning when they are passed unknown options.
- dh_makeshlibs will run dpkg-gensymbols on all shared libraries that it
generates shlibs files for. So -X can be used to exclude libraries. Also,
libraries in unusual locations that dpkg-gensymbols would not have processed
before will be passed to it, a behavior change that can cause some packages to
fail to build.
- dh requires the sequence to run be specified as the first parameter, and any
switches come after it. Ie, use "dh $@ --foo", not "dh --foo $@".
- dh_auto_* prefer to use Perl's Module::Build in preference to Makefile.PL.
v9 This is the recommended mode of operation.
Changes from v8 are:
- Multiarch support. In particular, dh_auto_configure passes multiarch
directories to autoconf in --libdir and --libexecdir.
- dh is aware of the usual dependencies between targets in debian/rules. So,
"dh binary" will run any build, build-arch, build-indep, install, etc targets
that exist in the rules file. There's no need to define an explicit binary
target with explicit dependencies on the other targets.
- dh_strip compresses debugging symbol files to reduce the installed size of
-dbg packages.
- dh_auto_configure does not include the source package name in --libexecdir
when using autoconf.
- dh does not default to enabling --with=python-support
- All of the dh_auto_* debhelper programs and dh set environment variables
listed by dpkg-buildflags, unless they are already set.
- dh_auto_configure passes dpkg-buildflags CFLAGS, CPPFLAGS, and LDFLAGS to perl
Makefile.PL and Build.PL
- dh_strip puts separated debug symbols in a location based on their build-id.
- Executable debhelper config files are run and their output used as the
configuration.
v10 This compatibility level is still open for development; use with caution.
Changes from v9 are:
- dh_installinit will no longer install a file named debian/package as an init script.
- dh no longer creates the package build directory when skipping running
debhelper commands. This will not affect packages that only build with
debhelper commands, but it may expose bugs in commands not included in
debhelper.
NOTES
Multiple binary package support
If your source package generates more than one binary package, debhelper programs will
default to acting on all binary packages when run. If your source package happens to
generate one architecture dependent package, and another architecture independent package,
this is not the correct behavior, because you need to generate the architecture dependent
packages in the binary-arch debian/rules target, and the architecture independent packages
in the binary-indep debian/rules target.
To facilitate this, as well as give you more control over which packages are acted on by
debhelper programs, all debhelper programs accept the -a, -i, -p, and -s parameters. These
parameters are cumulative. If none are given, debhelper programs default to acting on all
packages listed in the control file.
Automatic generation of Debian install scripts
Some debhelper commands will automatically generate parts of Debian maintainer scripts. If
you want these automatically generated things included in your existing Debian maintainer
scripts, then you need to add #DEBHELPER# to your scripts, in the place the code should be
added. #DEBHELPER# will be replaced by any auto-generated code when you run
dh_installdeb.
If a script does not exist at all and debhelper needs to add something to it, then
debhelper will create the complete script.
All debhelper commands that automatically generate code in this way let it be disabled by
the -n parameter (see above).
Note that the inserted code will be shell code, so you cannot directly use it in a Perl
script. If you would like to embed it into a Perl script, here is one way to do that (note
that I made sure that $1, $2, etc are set with the set command):
my $temp="set -e\nset -- @ARGV\n" . << 'EOF';
#DEBHELPER#
EOF
system ($temp) / 256 == 0
or die "Problem with debhelper scripts: $!";
Automatic generation of miscellaneous dependencies.
Some debhelper commands may make the generated package need to depend on some other
packages. For example, if you use dh_installdebconf(1), your package will generally need
to depend on debconf. Or if you use dh_installxfonts(1), your package will generally need
to depend on a particular version of xutils. Keeping track of these miscellaneous
dependencies can be annoying since they are dependent on how debhelper does things, so
debhelper offers a way to automate it.
All commands of this type, besides documenting what dependencies may be needed on their
man pages, will automatically generate a substvar called ${misc:Depends}. If you put that
token into your debian/control file, it will be expanded to the dependencies debhelper
figures you need.
This is entirely independent of the standard ${shlibs:Depends} generated by
dh_makeshlibs(1), and the ${perl:Depends} generated by dh_perl(1). You can choose not to
use any of these, if debhelper's guesses don't match reality.
Package build directories
By default, all debhelper programs assume that the temporary directory used for assembling
the tree of files in a package is debian/package.
Sometimes, you might want to use some other temporary directory. This is supported by the
-P flag. For example, "dh_installdocs -Pdebian/tmp", will use debian/tmp as the temporary
directory. Note that if you use -P, the debhelper programs can only be acting on a single
package at a time. So if you have a package that builds many binary packages, you will
need to also use the -p flag to specify which binary package the debhelper program will
act on.
udebs
Debhelper includes support for udebs. To create a udeb with debhelper, add "Package-Type:
udeb" to the package's stanza in debian/control. Debhelper will try to create udebs that
comply with debian-installer policy, by making the generated package files end in .udeb,
not installing any documentation into a udeb, skipping over preinst, postrm, prerm, and
config scripts, etc.
ENVIRONMENT
DH_VERBOSE
Set to 1 to enable verbose mode. Debhelper will output every command it runs that
modifies files on the build system.
DH_COMPAT
Temporarily specifies what compatibility level debhelper should run at, overriding any
value in debian/compat.
DH_NO_ACT
Set to 1 to enable no-act mode.
DH_OPTIONS
Anything in this variable will be prepended to the command line arguments of all
debhelper commands.
When using dh(1), it can be passed options that will be passed on to each debhelper
command, which is generally better than using DH_OPTIONS.
DH_ALWAYS_EXCLUDE
If set, this adds the value the variable is set to to the -X options of all commands
that support the -X option. Moreover, dh_builddeb will rm -rf anything that matches
the value in your package build tree.
This can be useful if you are doing a build from a CVS source tree, in which case
setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories from sneaking into the
package you build. Or, if a package has a source tarball that (unwisely) includes CVS
directories, you might want to export DH_ALWAYS_EXCLUDE=CVS in debian/rules, to make
it take effect wherever your package is built.
Multiple things to exclude can be separated with colons, as in
DH_ALWAYS_EXCLUDE=CVS:.svn
SEE ALSO
/usr/share/doc/debhelper/examples/
A set of example debian/rules files that use debhelper.
<http://kitenet.net/~joey/code/debhelper/>
Debhelper web site.
AUTHOR
Joey Hess <joeyh@debian.org>