NAME

       fence_drac - fencing agent for Dell Remote Access Card

SYNOPSIS

       fence_drac [OPTION]...

DESCRIPTION

       fence_drac  is  an  I/O  Fencing  agent which can be used with the Dell Remote Access Card
       (DRAC).  This card provides remote access to controlling power to a server.  It logs  into
       the  DRAC  through  the telnet interface of the card.  By default, the telnet interface is
       not enabled.  To enable the interface, you will need to use  the  racadm  command  in  the
       racser-devel rpm available from Dell.  To enable telnet on the DRAC:

       [root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1

       [root]# racadm racreset

       fence_drac  accepts  options  on  the  command  line  as well as from stdin.  Fenced sends
       parameters through stdin when it execs the agent.  fence_drac can be run  by  itself  with
       command  line  options.  This is useful for testing and for turning outlets on or off from
       scripts.

       Vendor URL: http://www.dell.com

OPTIONS

       -a IPaddress
              IP address or hostname of the switch.

       -c cmd_prompt
              Force fence_drac to use cmd_prompt as the command prompt

       -d dracversion
              Force fence_drac to treat the device as  though  it  was  for  the  specified  drac
              version

       -D dumpfile
              Debug file of the telnet interaction

       -h     Print out a help message describing available options, then exit.

       -l login
              Login name.

       -m modulename
              The module name of the blade when using DRAC/MC firmware.

       -o action
              The action required.  reboot (default), off, on or status.

       -p password
              Password for login.

       -S path
              Full path to an executable to generate the password for login.

       -f seconds
              Wait X seconds before fencing is started

       -V     Print out a version message, then exit.

STDIN PARAMETERS

       action = < param >
              The action required.  reboot (default), off, on or status.

       agent = < param >
              This option is used by fence_node(8) and is ignored by fence_apc.

       cmd_prompt = < param >
              Force fence_drac to use cmd_prompt as the command prompt

       drac_version = < param >
              Force  fence_drac  to  treat  the  device  as  though it was for the specified drac
              version.

       debug = < dumpfile >
              Debug file of the telnet interaction

       ipaddr = < hostname | ip >
              IP address or hostname of the switch.

       login = < param >
              Login name.

       modulename = < param >
              The module name of the blade when using DRAC/MC firmware.

       passwd = < param >
              Password for login.

       passwd_script = < param >
              Full path to an executable to generate the password for login.

       delay = < param >
              Wait X seconds before fencing is started

       SEE ALSO
              fence(8), fence_node(8)

                                                                                    fence_drac(8)