Provided by: nmap_7.01-2ubuntu2_amd64 bug

NAME

       ncat - Concatenate and redirect sockets

SYNOPSIS

       ncat [OPTIONS...] [hostname] [port]

DESCRIPTION

       Ncat is a feature-packed networking utility which reads and writes data across networks
       from the command line. Ncat was written for the Nmap Project and is the culmination of the
       currently splintered family of Netcat incarnations. It is designed to be a reliable
       back-end tool to instantly provide network connectivity to other applications and users.
       Ncat will not only work with IPv4 and IPv6 but provides the user with a virtually
       limitless number of potential uses.

       Among Ncat's vast number of features there is the ability to chain Ncats together;
       redirection of TCP, UDP, and SCTP ports to other sites; SSL support; and proxy connections
       via SOCKS4 or HTTP proxies (with optional proxy authentication as well). Some general
       principles apply to most applications and thus give you the capability of instantly adding
       networking support to software that would normally never support it.

OPTIONS SUMMARY

           Ncat 7.01 ( https://nmap.org/ncat )
           Usage: ncat [options] [hostname] [port]

           Options taking a time assume seconds. Append 'ms' for milliseconds,
           's' for seconds, 'm' for minutes, or 'h' for hours (e.g. 500ms).
             -4                         Use IPv4 only
             -6                         Use IPv6 only
             -U, --unixsock             Use Unix domain sockets only
             -C, --crlf                 Use CRLF for EOL sequence
             -c, --sh-exec <command>    Executes the given command via /bin/sh
             -e, --exec <command>       Executes the given command
                 --lua-exec <filename>  Executes the given Lua script
             -g hop1[,hop2,...]         Loose source routing hop points (8 max)
             -G <n>                     Loose source routing hop pointer (4, 8, 12, ...)
             -m, --max-conns <n>        Maximum <n> simultaneous connections
             -h, --help                 Display this help screen
             -d, --delay <time>         Wait between read/writes
             -o, --output <filename>    Dump session data to a file
             -x, --hex-dump <filename>  Dump session data as hex to a file
             -i, --idle-timeout <time>  Idle read/write timeout
             -p, --source-port port     Specify source port to use
             -s, --source addr          Specify source address to use (doesn't affect -l)
             -l, --listen               Bind and listen for incoming connections
             -k, --keep-open            Accept multiple connections in listen mode
             -n, --nodns                Do not resolve hostnames via DNS
             -t, --telnet               Answer Telnet negotiations
             -u, --udp                  Use UDP instead of default TCP
                 --sctp                 Use SCTP instead of default TCP
             -v, --verbose              Set verbosity level (can be used several times)
             -w, --wait <time>          Connect timeout
                 --append-output        Append rather than clobber specified output files
                 --send-only            Only send data, ignoring received; quit on EOF
                 --recv-only            Only receive data, never send anything
                 --allow                Allow only given hosts to connect to Ncat
                 --allowfile            A file of hosts allowed to connect to Ncat
                 --deny                 Deny given hosts from connecting to Ncat
                 --denyfile             A file of hosts denied from connecting to Ncat
                 --broker               Enable Ncat's connection brokering mode
                 --chat                 Start a simple Ncat chat server
                 --proxy <addr[:port]>  Specify address of host to proxy through
                 --proxy-type <type>    Specify proxy type ("http" or "socks4" or "socks5")
                 --proxy-auth <auth>    Authenticate with HTTP or SOCKS proxy server
                 --ssl                  Connect or listen with SSL
                 --ssl-cert             Specify SSL certificate file (PEM) for listening
                 --ssl-key              Specify SSL private key (PEM) for listening
                 --ssl-verify           Verify trust and domain name of certificates
                 --ssl-trustfile        PEM file containing trusted SSL certificates
                 --ssl-ciphers          Cipherlist containing SSL ciphers to use
                 --version              Display Ncat's version information and exit

           See the ncat(1) manpage for full options, descriptions and usage examples

CONNECT MODE AND LISTEN MODE

       Ncat operates in one of two primary modes: connect mode and listen mode. Other modes, such
       as the HTTP proxy server, act as special cases of these two. In connect mode, Ncat works
       as a client. In listen mode it is a server.

       In connect mode, the hostname and port arguments tell what to connect to.  hostname is
       required, and may be a hostname or IP address. If port is supplied, it must be a decimal
       port number. If omitted, it defaults to 31337..

       In listen mode, hostname and port control the address the server will bind to. Both
       arguments are optional in listen mode. If hostname is omitted, it defaults to listening on
       all available addresses over IPv4 and IPv6. If port is omitted, it defaults to 31337.

PROTOCOL OPTIONS

       -4 (IPv4 only) .
           Force the use of IPv4 only.

       -6 (IPv6 only) .
           Force the use of IPv6 only.

       -U, --unixsock (Use Unix domain sockets) .
           Use Unix domain sockets rather than network sockets. This option may be used on its
           own for stream sockets, or combined with --udp for datagram sockets. A description of
           -U mode is in the section called “UNIX DOMAIN SOCKETS”.

       -u, --udp (Use UDP) .
           Use UDP for the connection (the default is TCP).

       --sctp (Use SCTP) .
           Use SCTP for the connection (the default is TCP). SCTP support is implemented in
           TCP-compatible mode.

CONNECT MODE OPTIONS

       -g hop1[,hop2,...] (Loose source routing) .
           Sets hops for IPv4 loose source routing. You can use -g once with a comma-separated
           list of hops, use -g multiple times with single hops to build the list, or combine the
           two. Hops can be given as IP addresses or hostnames.

       -G ptr (Set source routing pointer) .
           Sets the IPv4 source route “pointer” for use with -g. The argument must be a multiple
           of 4 and no more than 28. Not all operating systems support setting this pointer to
           anything other than four.

       -p port, --source-port port (Specify source port) .
           Set the port number for Ncat to bind to.

       -s host, --source host (Specify source address) .
           Set the address for Ncat to bind to.

LISTEN MODE OPTIONS

       See the section called “ACCESS CONTROL OPTIONS” for information on limiting the hosts that
       may connect to the listening Ncat process.

       -l, --listen (Listen for connections) .
           Listen for connections rather than connecting to a remote machine

       -m numconns, --max-conns numconns (Specify maximum number of connections) .
           The maximum number of simultaneous connections accepted by an Ncat instance. 100 is
           the default (60 on Windows).

       -k, --keep-open (Accept multiple connections) .
           Normally a listening server accepts only one connection and then quits when the
           connection is closed. This option makes it accept multiple simultaneous connections
           and wait for more connections after they have all been closed. It must be combined
           with --listen. In this mode there is no way for Ncat to know when its network input is
           finished, so it will keep running until interrupted. This also means that it will
           never close its output stream, so any program reading from Ncat and looking for
           end-of-file will also hang.

       --broker (Connection brokering) .
           Allow multiple parties to connect to a centralised Ncat server and communicate with
           each other. Ncat can broker communication between systems that are behind a NAT or
           otherwise unable to directly connect. This option is used in conjunction with
           --listen, which causes the --listen port to have broker mode enabled.

       --chat (Ad-hoc “chat server”) .
           The --chat option enables chat mode, intended for the exchange of text between several
           users. In chat mode, connection brokering is turned on. Ncat prefixes each message
           received with an ID before relaying it to the other connections. The ID is unique for
           each connected client. This helps distinguish who sent what. Additionally,
           non-printing characters such as control characters are escaped to keep them from doing
           damage to a terminal.

SSL OPTIONS

       --ssl (Use SSL) .
           In connect mode, this option transparently negotiates an SSL session with an SSL
           server to securely encrypt the connection. This is particularly handy for talking to
           SSL enabled HTTP servers, etc.

           In server mode, this option listens for incoming SSL connections, rather than plain
           untunneled traffic.

       --ssl-verify (Verify server certificates) .
           In client mode, --ssl-verify is like --ssl except that it also requires verification
           of the server certificate. Ncat comes with a default set of trusted certificates in
           the file ca-bundle.crt..  Some operating systems provide a default list of trusted
           certificates; these will also be used if available. Use --ssl-trustfile to give a
           custom list. Use -v one or more times to get details about verification failures.
           Ncat does not check for revoked certificates..

           This option has no effect in server mode.

       --ssl-cert certfile.pem (Specify SSL certificate) .
           This option gives the location of a PEM-encoded certificate files used to authenticate
           the server (in listen mode) or the client (in connect mode). Use it in combination
           with --ssl-key.

       --ssl-key keyfile.pem (Specify SSL private key) .
           This option gives the location of the PEM-encoded private key file that goes with the
           certificate named with --ssl-cert.

       --ssl-trustfile cert.pem (List trusted certificates) .
           This option sets a list of certificates that are trusted for purposes of certificate
           verification. It has no effect unless combined with --ssl-verify. The argument to this
           option is the name of a PEM.  file containing trusted certificates. Typically, the
           file will contain certificates of certification authorities, though it may also
           contain server certificates directly. When this option is used, Ncat does not use its
           default certificates.

       --ssl-ciphers cipherlist (Specify SSL ciphersuites) .
           This option sets the list of ciphersuites that Ncat will use when connecting to
           servers or when accepting SSL connections from clients. The syntax is described in the
           OpenSSL ciphers(1) man page, and defaults to ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH

PROXY OPTIONS

       --proxy host[:port] (Specify proxy address) .
           Requests proxying through host:port, using the protocol specified by --proxy-type.

           If no port is specified, the proxy protocol's well-known port is used (1080 for SOCKS
           and 3128 for HTTP). However, when specifying an IPv6 HTTP proxy server using the IP
           address rather than the hostname, the port number MUST be specified as well. If the
           proxy requires authentication, use --proxy-auth.

       --proxy-type proto (Specify proxy protocol) .
           In connect mode, this option requests the protocol proto to connect through the proxy
           host specified by --proxy. In listen mode, this option has Ncat act as a proxy server
           using the specified protocol.

           The currently available protocols in connect mode are http (CONNECT) and socks4
           (SOCKSv4). The only server currently supported is http. If this option is not used,
           the default protocol is http.

       --proxy-auth user[:pass] (Specify proxy credentials) .
           In connect mode, gives the credentials that will be used to connect to the proxy
           server. In listen mode, gives the credentials that will be required of connecting
           clients. For use with --proxy-type http, the form should be user:pass. For
           --proxy-type socks4, it should be a username only.

COMMAND EXECUTION OPTIONS

       -e command, --exec command (Execute command) .
           Execute the specified command after a connection has been established. The command
           must be specified as a full pathname. All input from the remote client will be sent to
           the application and responses sent back to the remote client over the socket, thus
           making your command-line application interactive over a socket. Combined with
           --keep-open, Ncat will handle multiple simultaneous connections to your specified
           port/application like inetd. Ncat will only accept a maximum, definable, number of
           simultaneous connections controlled by the -m option. By default this is set to 100
           (60 on Windows).

       -c command, --sh-exec command (Execute command via sh) .
           Same as -e, except it tries to execute the command via /bin/sh. This means you don't
           have to specify the full path for the command, and shell facilities like environment
           variables are available.

       --lua-exec file (Execute a .lua script) .
           Runs the specified file as a Lua script after a connection has been established, using
           a built-in interpreter. Both the script's standard input and the standard output are
           redirected to the connection data streams.

       All exec options add the following variables to the child's environment:

       NCAT_REMOTE_ADDR, NCAT_REMOTE_PORT
           The IP address and port number of the remote host. In connect mode, it's the target's
           address; in listen mode, it's the client's address.

       NCAT_LOCAL_ADDR, NCAT_LOCAL_PORT
           The IP address and port number of the local end of the connection.

       NCAT_PROTO
           The protocol in use: one of TCP, UDP, and SCTP.

ACCESS CONTROL OPTIONS

       --allow host[,host,...] (Allow connections) .
           The list of hosts specified will be the only hosts allowed to connect to the Ncat
           process. All other connection attempts will be disconnected. In case of a conflict
           between --allow and --deny, --allow takes precedence. Host specifications follow the
           same syntax used by Nmap.

       --allowfile file (Allow connections from file) .
           This has the same functionality as --allow, except that the allowed hosts are provided
           in a new-line delimited allow file, rather than directly on the command line.

       --deny host[,host,...] (Deny connections) .
           Issue Ncat with a list of hosts that will not be allowed to connect to the listening
           Ncat process. Specified hosts will have their session silently terminated if they try
           to connect. In case of a conflict between --allow and --deny, --allow takes
           precedence. Host specifications follow the same syntax used by Nmap.

       --denyfile file (Deny connections from file) .
           This is the same functionality as --deny, except that excluded hosts are provided in a
           new-line delimited deny file, rather than directly on the command line.

TIMING OPTIONS

       These options accept a time parameter. This is specified in seconds by default, though you
       can append ms, s, m, or h to the value to specify milliseconds, seconds, minutes, or
       hours.

       -d time, --delay time (Specify line delay) .
           Set the delay interval for lines sent. This effectively limits the number of lines
           that Ncat will send in the specified period. This may be useful for low-bandwidth
           sites, or have other uses such as coping with annoying iptables --limit options.

       -i time, --idle-timeout time (Specify idle timeout) .
           Set a fixed timeout for idle connections. If the idle timeout is reached, the
           connection is terminated.

       -w time, --wait time (Specify connect timeout) .
           Set a fixed timeout for connection attempts.

OUTPUT OPTIONS

       -o file, --output file (Save session data) .
           Dump session data to a file

       -x file, --hex-dump file (Save session data in hex) .
           Dump session data in hex to a file.

       --append-output (Append output) .
           Issue Ncat with --append-ouput along with -o and/or -x and it will append the resulted
           output rather than truncating the specified output files.

       -v, --verbose (Be verbose) .
           Issue Ncat with -v and it will be verbose and display all kinds of useful connection
           based information. Use more than once (-vv, -vvv...) for greater verbosity.

MISC OPTIONS

       -C, --crlf (Use CRLF as EOL) .
           This option tells Ncat to convert LF.  line endings to CRLF.  when taking input from
           standard input..  This is useful for talking to some stringent servers directly from a
           terminal in one of the many common plain-text protocols that use CRLF for end-of-line.

       -h, --help (Help screen) .
           Displays a short help screen with common options and parameters, and then exits.

       --recv-only (Only receive data) .
           If this option is passed, Ncat will only receive data and will not try to send
           anything.

       --send-only (Only send data) .
           If this option is passed, then Ncat will only send data and will ignore anything
           received. This option also causes Ncat to close the network connection and terminate
           after EOF is received on standard input.

       --no-shutdown (Do not shutdown into half-duplex mode) .
           If this option is passed, Ncat will not invoke shutdown on a socket aftering seeing
           EOF on stdin. This is provided for backward-compatibility with OpenBSD netcat, which
           exhibits this behavior when executed with its '-d' option.

       -t, --telnet (Answer Telnet negotiations) .
           Handle DO/DONT WILL/WONT Telnet negotiations. This makes it possible to script Telnet
           sessions with Ncat.

       --version (Display version) .
           Displays the Ncat version number and exits.

UNIX DOMAIN SOCKETS

       The -U option (same as --unixsock) causes Ncat to use Unix domain sockets rather than
       network sockets. Unix domain sockets exist as an entry in the filesystem. You must give
       the name of a socket to connect to or to listen on. For example, to make a connection,

       ncat -U ~/unixsock

       To listen on a socket:

       ncat -l -U ~/unixsock

       Listen mode will create the socket if it doesn't exist. The socket will continue to exist
       after the program ends.

       Both stream and datagram domain sockets are supported. Use -U on its own for stream
       sockets, or combine it with --udp for datagram sockets. Datagram sockets require a source
       socket to connect from. By default, a source socket with a random filename will be created
       as needed, and deleted when the program ends. Use the --source with a path to use a source
       socket with a specific name.

EXAMPLES

       Connect to example.org on TCP port 8080.
           ncat example.org 8080

       Listen for connections on TCP port 8080.
           ncat -l 8080

       Redirect TCP port 8080 on the local machine to host on port 80.
           ncat --sh-exec "ncat example.org 80" -l 8080 --keep-open

       Bind to TCP port 8081 and attach /bin/bash for the world to access freely.
           ncat --exec "/bin/bash" -l 8081 --keep-open

       Bind a shell to TCP port 8081, limit access to hosts on a local network, and limit the
       maximum number of simultaneous connections to 3.
           ncat --exec "/bin/bash" --max-conns 3 --allow 192.168.0.0/24 -l 8081 --keep-open

       Connect to smtphost:25 through a SOCKS4 server on port 1080.
           ncat --proxy socks4host --proxy-type socks4 --proxy-auth user smtphost 25

       Create an HTTP proxy server on localhost port 8888.
           ncat -l --proxy-type http localhost 8888

       Send a file over TCP port 9899 from host2 (client) to host1 (server).
           HOST1$ ncat -l 9899 > outputfile

           HOST2$ ncat HOST1 9899 < inputfile

       Transfer in the other direction, turning Ncat into a “one file” server.
           HOST1$ ncat -l 9899 < inputfile

           HOST2$ ncat HOST1 9899 > outputfile

EXIT CODE

       The exit code reflects whether a connection was made and completed successfully. 0 means
       there was no error. 1 means there was a network error of some kind, for example
       “Connection refused” or “Connection reset”. 2 is reserved for all other errors, like an
       invalid option or a nonexistent file.

BUGS

       Like its authors, Ncat isn't perfect. But you can help make it better by sending bug
       reports or even writing patches. If Ncat doesn't behave the way you expect, first upgrade
       to the latest version available from https://nmap.org. If the problem persists, do some
       research to determine whether it has already been discovered and addressed. Try Googling
       the error message or browsing the nmap-dev archives at http://seclists.org/.  Read this
       full manual page as well. If nothing comes of this, mail a bug report to <dev@nmap.org>.
       Please include everything you have learned about the problem, as well as what version of
       Ncat you are running and what operating system version it is running on. Problem reports
       and Ncat usage questions sent to dev@nmap.org are far more likely to be answered than
       those sent to Fyodor directly.

       Code patches to fix bugs are even better than bug reports. Basic instructions for creating
       patch files with your changes are available at https://svn.nmap.org/nmap/HACKING. Patches
       may be sent to nmap-dev (recommended) or to Fyodor directly.

AUTHORS

       •   Chris Gibson <chris@linuxops.net>

       •   Kris Katterjohn <katterjohn@gmail.com>

       •   Mixter <mixter@gmail.com>

       •   Fyodor <fyodor@nmap.org> (http://insecure.org)

       The original Netcat was written by *Hobbit* <hobbit@avian.org>. While Ncat isn't built on
       any code from the “traditional” Netcat (or any other implementation), Ncat is most
       definitely based on Netcat in spirit and functionality.

LEGAL NOTICES

   Ncat Copyright and Licensing
       Ncat is (C) 2005–2012 Insecure.Com LLC. It is distributed as free and open source software
       under the same license terms as our Nmap software. Precise terms and further details are
       available from https://nmap.org/man/man-legal.html.

   Creative Commons License for this Ncat Guide
       This Ncat Reference Guide is (C) 2005–2012 Insecure.Com LLC. It is hereby placed under
       version 3.0 of the Creative Commons Attribution License[1]. This allows you redistribute
       and modify the work as you desire, as long as you credit the original source.
       Alternatively, you may choose to treat this document as falling under the same license as
       Ncap itself (discussed previously).

   Source Code Availability and Community Contributions
       Source is provided to this software because we believe users have a right to know exactly
       what a program is going to do before they run it. This also allows you to audit the
       software for security holes (none have been found so far).

       Source code also allows you to port Nmap (which includes Ncat) to new platforms, fix bugs,
       and add new features. You are highly encouraged to send your changes to <dev@nmap.org> for
       possible incorporation into the main distribution. By sending these changes to Fyodor or
       one of the Insecure.Org development mailing lists, it is assumed that you are offering the
       Nmap Project (Insecure.Com LLC) the unlimited, non-exclusive right to reuse, modify, and
       relicense the code. Nmap will always be available open source,.  but this is important
       because the inability to relicense code has caused devastating problems for other Free
       Software projects (such as KDE and NASM). We also occasionally relicense the code to third
       parties as discussed in the Nmap man page. If you wish to specify special license
       conditions of your contributions, just say so when you send them.

   No Warranty.
       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License v2.0 for more details at
       http://www.gnu.org/licenses/gpl-2.0.html, or in the COPYING file included with Nmap.

   Inappropriate Usage
       Ncat should never be installed with special privileges (e.g. suid root)..  That would open
       up a major security vulnerability as other users on the system (or attackers) could use it
       for privilege escalation.

   Third-Party Software
       This product includes software developed by the Apache Software Foundation[2]. A modified
       version of the Libpcap portable packet capture library[3].  is distributed along with
       Ncat. The Windows version of Ncat utilized the Libpcap-derived WinPcap library[4].
       instead. Certain raw networking functions use the Libdnet[5].  networking library, which
       was written by Dug Song..  A modified version is distributed with Ncat. Ncat can
       optionally link with the OpenSSL cryptography toolkit[6].  for SSL version detection
       support. All of the third-party software described in this paragraph is freely
       redistributable under BSD-style software licenses.

NOTES

        1. Creative Commons Attribution License
           http://creativecommons.org/licenses/by/3.0/

        2. Apache Software Foundation
           http://www.apache.org

        3. Libpcap portable packet capture library
           http://www.tcpdump.org

        4. WinPcap library
           http://www.winpcap.org

        5. Libdnet
           http://libdnet.sourceforge.net

        6. OpenSSL cryptography toolkit
           http://www.openssl.org