NAME

       vdr-fbfe - Remote Framebuffer frontend for vdr-plugin-xineliboutput

SYNOPSIS

       vdr-fbfe [options] [xvdr[+udp|+tcp|+rtp]:[//host[:port]]]

DESCRIPTION

       vdr-fbfe is a Framebuffer remote frontend, that plays back streams provided by vdr-plugin-
       xineliboutput.

OPTIONS

       --help Show (this) help message

       --audio=audiodriver[:device]
              Select audio driver and optional port

       --video=videodriver[:fb_device]
              Select video driver and optional port As far as supported, possible  video  drivers
              might be: fb, DirectFB, sdl, vidixfb, dxr3, aadxr3 or none

       --aspect=[auto|4:3|16:9|16:10|default]
              Display  aspect  ratio  (You  can  us  a  script  to  control  the HW aspect ratio:
              --aspect=auto:path_to_script)

       --fullscreen
              Fullscreen mode

       --hud  Head Up Display OSD mode

       --width=x
              Video window width

       --height=x
              Video window height

       --noscaling
              Disable all video scaling

       --post=name[:arg=val[,arg=val]]
              Load and use xine post plugins, e.g.:

              •  --post=upmix

              •  --post=upmix;tvtime:enabled=1,cheap_mode=1)

       --lirc[=devicename]
              Use lirc input device Optional lirc socket name can be given

       --verbose
              Verbose debug output

       --silent
              Silent mode (report only errors)

       --syslog
              Write all output to system log

       --nokbd
              Disable keyboard input

       --daemon
              Run as daemon (disable keyboard, log to syslog and fork to background)

       --slave
              Enable slave mode (read commands from stdin)

       --reconnect
              Automatically reconnect when connection has been lost

       --tcp, --udp, --rtp
              Use TCP, UDP or RTP transport If no transport options  are  given,  transports  are
              tried in following order: local pipe, rtp, udp, tcp

EXAMPLES

       Search  for  VDR  (xineliboutput)  server,  connect  to  it  and  negotiate best available
       transport, use best available audio and video driver:

           vdr-fbfe

       Connect to 192.168.1.3 default port and negoate best available transport:

            vdr-fbfe xvdr://192.168.1.3

       Connect to 192.168.2.100, port 12550 and use TCP transport:

           vdr-fbfe xvdr+tcp://192.168.2.100:12550

       Automatically search for VDR server and use UDP transport:

           vdr-fbfe xvdr+udp:
           vdr-fbfe --udp

       Use alsa:

           vdr-fbfe --audio alsa

       Use alsa (and specific card/sub-device):

           vdr-fbfe --audio alsa:plughw:1,1

       Framebuffer driver and device settings:

           vdf-fbfe --video DirectFB
           vdf-fbfe --video fb:/dev/fb/1
           vdf-fbfe --video vidixfb
           vdf-fbfe --video aadxr3

NOTE

       If deinterlacing post plugin options are not  given  at  command  line,  deinterlacing  is
       controlled by VDR plugin configuration menu settings.

       De-interlacing  can  also  be  forced  on or off with command-line option "--post tvtime".
       Examples:

           vdr-fbfe --post tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
           vdr-fbfe --post tvtime:enable=0

AUTHOR

       This manual page was written by Tobias Grimm <etobi@debian.org>

                                         24 October 2015                              vdr-fbfe(1)