Provided by: aprx_2.08.svn593+dfsg-2_i386 bug


       aprx-stat - statistics utility for aprx(8)


       aprx-stat [-t] [-f/var/run/aprx.state] {-S|-x|-X}


       aprx-stat is a statistics utility for aprx(8) program.


       The aprx-stat has following runtime options:

       -f /var/run/aprx.state
              Turn on verbose debugging, outputs data to STDOUT.

       -S     SNMP data mode, current counter and gauge values.

       -t     Use  UNIX  time_t for timestamps, instead of human readable text

       -x     Lattest of extended historical gauge  values.   This  gives  for
              each input interface

              · SNMP data

              · last 90 of 1 minute values,

              · 10 of 10 minute values,

              · 3 of 60 minute values.

       -X     Full  extended  historical  gauge  values.   This  gives all the
              contents of historical value data ring-buffers.

              · SNMP data

              · 1 minute resolution: 24 hours

              · 10 minute resolution: 7 days

              · 60 minute resolution: 3 months


       For each interface feeding AX.25 packets and/or  KISS  frames  to  this
       program, there are following kind of
       SNMP  /dev/ttyUSB1   798282 11088   0  0     3
       SNMP  ax0   798282 11088   0  0     7
       SNMP  ax1   798282 11088   0  0     94

       where columns are:

       · "SNMP" - keyword

       · Interface (AX.25 IF name, or serial port device name)

       · Received byte counter

       · Received frame (packet) counter

       · Dropped byte counter

       · Dropped frame counter

       · Age in seconds of last update of this statistics.


       Extended data output gives formatted historical periodic accumulates of
       interface traffic counters, and Erlang value estimates based on that.

       SNMP  /dev/ttyUSB1   816675 11332   0  0     15

       1min data
       2007-12-24 14:10  /dev/ttyUSB1  1m    374    6      0    0   0.047  0.000
       2007-12-24 14:09  /dev/ttyUSB1  1m    377    5      0    0   0.047  0.000
       2007-12-24 14:08  /dev/ttyUSB1  1m    347    5      0    0   0.043  0.000
       2007-12-24 14:07  /dev/ttyUSB1  1m    140    2      0    0   0.018  0.000

       10min data
       2007-12-24 14:10  /dev/ttyUSB1 10m   3829   55      0    0   0.048  0.000
       2007-12-24 14:00  /dev/ttyUSB1 10m   2182   28      0    0   0.027  0.000
       2007-12-24 13:50  /dev/ttyUSB1 10m   3205   44      0    0   0.040  0.000
       2007-12-24 13:40  /dev/ttyUSB1 10m   3811   50      0    0   0.048  0.000

       60min data
       2007-12-24 14:00  /dev/ttyUSB1 60m  22510  295      0    0   0.047  0.000
       2007-12-24 13:00  /dev/ttyUSB1 60m  24886  347      0    0   0.052  0.000

       The output repeats for all interfaces.

       The SNMP dataset is given in the beginning, and described above.   Then
       each extended output line has following fields:

       · Timestamp  is  two fields, date and time (in minute resolution) is in

       · Alternate timestamp format is UNIX time_t  as  an  integer,  counting
         seconds from epoch, and as single field.

       · Interface name is same as in SNMP case.

       · Data  qualifier  tells what integration period the data is valid for:
         1m, 10m, 60m.

       · Counter of received bytes on interface (including KISS flags etc.)

       · Counter of received frames.

       · Counter of dropped bytes.

       · Counter of dropped frames.

       · Reception Erlang value estimate.

       · Dropped bytes Erlang value estimate.






       There is no configuration file.


       The Erlang is telecom measurement of channel  occupancy,  and  in  this
       application  sense  it does tell how much traffic there is on the radio

       Most radio transmitters are not aware of all transmitters  on  channel,
       and  thus  there  can happen a collision causing loss of both messages.
       The higher the channel activity, the more  likely  that  collision  is.
       For further details, refer to statistical mathematics books, or perhaps
       on Wikipedia.

       In order to measure channel activity, the aprx program suite has  these
       built-in statistics counter and summary estimators.

       The  Erlag  value  that  the  estimators  present  are  likely somewhat
       underestimating the true channel occupancy simply because it calculates
       estimate  of channel bit transmit rate, and thus a per-minute character
       capacity.  It does not know true frequency of  bit-stuffing  events  of
       the  HDLC  framing, nor each transmitter pre- and port frame PTT times.
       The transmitters need to stabilize their transmit oscillators  in  many
       cases,  which may take up to around 500 ms!  The counters are not aware
       of this preamble-, nor postamble-times.

       The HDLC bit stuffing ratio is guessed to be 8.2 bits for each  8  bits
       of payload.


       This  program needs probably to be run as suid-root !  It is considered
       safe to do so, as this checks that the -f parameter file is of  correct
       "magic  value", and will not try to create it if it does not exist, nor
       modify that file under any circumstances, nor reveal content of  "wrong
       magic kind" of file.


       This little piece was written by Matti Aarnio, OH2MQK during a dark and
       rainy fall and winter  of  2007-2008  after  a  number  of  discussions
       grumbling  about current breed of available software for APRS iGate use
       in Linux (or of any UNIX) platforms.  Fall  and  winter  2009-2010  saw
       appearance of digipeater functionality.

       Principal  contributors and test users include: Pentti Gronlund, OH3BK,
       Reijo Hakala, OH1GWK.  Debian packaging by Kimmo Jukarinen, OH3GNU.

                       aprx-2.08.svn593 - 2015 August 18          aprx-stat(8)