Provided by: borgbackup_1.1.15-1~ubuntu1.18.04.2_amd64 
NAME
borg-create - Create new archive
SYNOPSIS
borg [common options] create [options] ARCHIVE [PATH...]
DESCRIPTION
This command creates a backup archive containing all files found while recursively
traversing all paths specified. Paths are added to the archive as they are given, that
means if relative paths are desired, the command has to be run from the correct directory.
When giving '-' as path, borg will read data from standard input and create a file 'stdin'
in the created archive from that data. See section Reading from stdin below for details.
The archive will consume almost no disk space for files or parts of files that have
already been stored in other archives.
The archive name needs to be unique. It must not end in '.checkpoint' or '.checkpoint.N'
(with N being a number), because these names are used for checkpoints and treated in
special ways.
In the archive name, you may use the following placeholders: {now}, {utcnow}, {fqdn},
{hostname}, {user} and some others.
Backup speed is increased by not reprocessing files that are already part of existing
archives and weren't modified. The detection of unmodified files is done by comparing
multiple file metadata values with previous values kept in the files cache.
This comparison can operate in different modes as given by --files-cache:
• ctime,size,inode (default)
• mtime,size,inode (default behaviour of borg versions older than 1.1.0rc4)
• ctime,size (ignore the inode number)
• mtime,size (ignore the inode number)
• rechunk,ctime (all files are considered modified - rechunk, cache ctime)
• rechunk,mtime (all files are considered modified - rechunk, cache mtime)
• disabled (disable the files cache, all files considered modified - rechunk)
inode number: better safety, but often unstable on network filesystems
Normally, detecting file modifications will take inode information into consideration to
improve the reliability of file change detection. This is problematic for files located
on sshfs and similar network file systems which do not provide stable inode numbers, such
files will always be considered modified. You can use modes without inode in this case to
improve performance, but reliability of change detection might be reduced.
ctime vs. mtime: safety vs. speed
• ctime is a rather safe way to detect changes to a file (metadata and contents) as it can
not be set from userspace. But, a metadata-only change will already update the ctime, so
there might be some unnecessary chunking/hashing even without content changes. Some
filesystems do not support ctime (change time). E.g. doing a chown or chmod to a file
will change its ctime.
• mtime usually works and only updates if file contents were changed. But mtime can be
arbitrarily set from userspace, e.g. to set mtime back to the same value it had before a
content change happened. This can be used maliciously as well as well-meant, but in both
cases mtime based cache modes can be problematic.
The mount points of filesystems or filesystem snapshots should be the same for every
creation of a new archive to ensure fast operation. This is because the file cache that is
used to determine changed files quickly uses absolute filenames. If this is not possible,
consider creating a bind mount to a stable location.
The --progress option shows (from left to right) Original, Compressed and Deduplicated (O,
C and D, respectively), then the Number of files (N) processed so far, followed by the
currently processed path.
When using --stats, you will get some statistics about how much data was added - the "This
Archive" deduplicated size there is most interesting as that is how much your repository
will grow. Please note that the "All archives" stats refer to the state after creation.
Also, the --stats and --dry-run options are mutually exclusive because the data is not
actually compressed and deduplicated during a dry run.
See the output of the "borg help patterns" command for more help on exclude patterns.
See the output of the "borg help placeholders" command for more help on placeholders.
OPTIONS
See borg-common(1) for common options of Borg commands.
arguments
ARCHIVE
name of archive to create (must be also a valid directory name)
PATH paths to archive
optional arguments
-n, --dry-run
do not create a backup archive
-s, --stats
print statistics for the created archive
--list output verbose list of items (files, dirs, ...)
--filter STATUSCHARS
only display items with the given status characters (see description)
--json output stats as JSON. Implies --stats.
--no-cache-sync
experimental: do not synchronize the cache. Implies not using the files cache.
--no-files-cache
do not load/update the file metadata cache used to detect unchanged files
--stdin-name NAME
use NAME in archive for stdin data (default: "stdin")
--stdin-user USER
set user USER in archive for stdin data (default: 'root')
--stdin-group GROUP
set group GROUP in archive for stdin data (default: 'root')
--stdin-mode M
set mode to M in archive for stdin data (default: 0660)
Exclusion options
-e PATTERN, --exclude PATTERN
exclude paths matching PATTERN
--exclude-from EXCLUDEFILE
read exclude patterns from EXCLUDEFILE, one per line
--pattern PATTERN
experimental: include/exclude paths matching PATTERN
--patterns-from PATTERNFILE
experimental: read include/exclude patterns from PATTERNFILE, one per line
--exclude-caches
exclude directories that contain a CACHEDIR.TAG file (‐
http://www.bford.info/cachedir/spec.html)
--exclude-if-present NAME
exclude directories that are tagged by containing a filesystem object with the
given NAME
--keep-exclude-tags, --keep-tag-files
if tag objects are specified with --exclude-if-present, don't omit the tag objects
themselves from the backup archive
--exclude-nodump
exclude files flagged NODUMP
Filesystem options
-x, --one-file-system
stay in the same file system and do not store mount points of other file systems.
This might behave different from your expectations, see the docs.
--numeric-owner
only store numeric user and group identifiers
--noatime
do not store atime into archive
--noctime
do not store ctime into archive
--nobirthtime
do not store birthtime (creation date) into archive
--nobsdflags
do not read and store bsdflags (e.g. NODUMP, IMMUTABLE) into archive
--ignore-inode
ignore inode data in the file metadata cache used to detect unchanged files.
--files-cache MODE
operate files cache in MODE. default: ctime,size,inode
--read-special
open and read block and char device files as well as FIFOs as if they were regular
files. Also follows symlinks pointing to these kinds of files.
Archive options
--comment COMMENT
add a comment text to the archive
--timestamp TIMESTAMP
manually specify the archive creation date/time (UTC, yyyy-mm-ddThh:mm:ss format).
Alternatively, give a reference file/directory.
-c SECONDS, --checkpoint-interval SECONDS
write checkpoint every SECONDS seconds (Default: 1800)
--chunker-params PARAMS
specify the chunker parameters (CHUNK_MIN_EXP, CHUNK_MAX_EXP, HASH_MASK_BITS,
HASH_WINDOW_SIZE). default: 19,23,21,4095
-C COMPRESSION, --compression COMPRESSION
select compression algorithm, see the output of the "borg help compression" command
for details.
EXAMPLES
# Backup ~/Documents into an archive named "my-documents"
$ borg create /path/to/repo::my-documents ~/Documents
# same, but list all files as we process them
$ borg create --list /path/to/repo::my-documents ~/Documents
# Backup ~/Documents and ~/src but exclude pyc files
$ borg create /path/to/repo::my-files \
~/Documents \
~/src \
--exclude '*.pyc'
# Backup home directories excluding image thumbnails (i.e. only
# /home/<one directory>/.thumbnails is excluded, not /home/*/*/.thumbnails etc.)
$ borg create /path/to/repo::my-files /home \
--exclude 'sh:/home/*/.thumbnails'
# Backup the root filesystem into an archive named "root-YYYY-MM-DD"
# use zlib compression (good, but slow) - default is lz4 (fast, low compression ratio)
$ borg create -C zlib,6 --one-file-system /path/to/repo::root-{now:%Y-%m-%d} /
# Backup a remote host locally ("pull" style) using sshfs
$ mkdir sshfs-mount
$ sshfs root@example.com:/ sshfs-mount
$ cd sshfs-mount
$ borg create /path/to/repo::example.com-root-{now:%Y-%m-%d} .
$ cd ..
$ fusermount -u sshfs-mount
# Make a big effort in fine granular deduplication (big chunk management
# overhead, needs a lot of RAM and disk space, see formula in internals
# docs - same parameters as borg < 1.0 or attic):
$ borg create --chunker-params 10,23,16,4095 /path/to/repo::small /smallstuff
# Backup a raw device (must not be active/in use/mounted at that time)
$ dd if=/dev/sdx bs=10M | borg create /path/to/repo::my-sdx -
# No compression (none)
$ borg create --compression none /path/to/repo::arch ~
# Super fast, low compression (lz4, default)
$ borg create /path/to/repo::arch ~
# Less fast, higher compression (zlib, N = 0..9)
$ borg create --compression zlib,N /path/to/repo::arch ~
# Even slower, even higher compression (lzma, N = 0..9)
$ borg create --compression lzma,N /path/to/repo::arch ~
# Only compress compressible data with lzma,N (N = 0..9)
$ borg create --compression auto,lzma,N /path/to/repo::arch ~
# Use short hostname, user name and current time in archive name
$ borg create /path/to/repo::{hostname}-{user}-{now} ~
# Similar, use the same datetime format that is default as of borg 1.1
$ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S} ~
# As above, but add nanoseconds
$ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S.%f} ~
# Backing up relative paths by moving into the correct directory first
$ cd /home/user/Documents
# The root directory of the archive will be "projectA"
$ borg create /path/to/repo::daily-projectA-{now:%Y-%m-%d} projectA
NOTES
The --exclude patterns are not like tar. In tar --exclude .bundler/gems will exclude
foo/.bundler/gems. In borg it will not, you need to use --exclude '*/.bundler/gems' to get
the same effect. See borg help patterns for more information.
In addition to using --exclude patterns, it is possible to use --exclude-if-present to
specify the name of a filesystem object (e.g. a file or folder name) which, when contained
within another folder, will prevent the containing folder from being backed up. By
default, the containing folder and all of its contents will be omitted from the backup.
If, however, you wish to only include the objects specified by --exclude-if-present in
your backup, and not include any other contents of the containing folder, this can be
enabled through using the --keep-exclude-tags option.
The -x or --one-file-system option excludes directories, that are mountpoints (and
everything in them). It detects mountpoints by comparing the device number from the
output of stat() of the directory and its parent directory. Specifically, it excludes
directories for which stat() reports a device number different from the device number of
their parent. Be aware that in Linux (and possibly elsewhere) there are directories with
device number different from their parent, which the kernel does not consider a mountpoint
and also the other way around. Examples are bind mounts (possibly same device number, but
always a mountpoint) and ALL subvolumes of a btrfs (different device number from parent
but not necessarily a mountpoint). Therefore when using --one-file-system, one should make
doubly sure that the backup works as intended especially when using btrfs. This is even
more important, if the btrfs layout was created by someone else, e.g. a distribution
installer.
Item flags
--list outputs a list of all files, directories and other file system items it considered
(no matter whether they had content changes or not). For each item, it prefixes a
single-letter flag that indicates type and/or status of the item.
If you are interested only in a subset of that output, you can give e.g. --filter=AME and
it will only show regular files with A, M or E status (see below).
A uppercase character represents the status of a regular file relative to the "files"
cache (not relative to the repo -- this is an issue if the files cache is not used).
Metadata is stored in any case and for 'A' and 'M' also new data chunks are stored. For
'U' all data chunks refer to already existing chunks.
• 'A' = regular file, added (see also a_status_oddity in the FAQ)
• 'M' = regular file, modified
• 'U' = regular file, unchanged
• 'E' = regular file, an error happened while accessing/reading this file
A lowercase character means a file type other than a regular file, borg usually just
stores their metadata:
• 'd' = directory
• 'b' = block device
• 'c' = char device
• 'h' = regular file, hardlink (to already seen inodes)
• 's' = symlink
• 'f' = fifo
Other flags used include:
• 'i' = backup data was read from standard input (stdin)
• '-' = dry run, item was not backed up
• 'x' = excluded, item was not backed up
• '?' = missing status code (if you see this, please file a bug report!)
Reading from stdin
To read from stdin, specify - as path and pipe directly to borg:
backup-vm --id myvm --stdout | borg create REPO::ARCHIVE -
Note that piping to borg creates an archive even if the command piping to borg exits with
a failure. In this case, one can end up with truncated output being backed up.
Reading from stdin yields just a stream of data without file metadata associated with it,
and the files cache is not needed at all. So it is safe to disable it via --no-files-cache
and speed up backup creation a bit.
By default, the content read from stdin is stored in a file called 'stdin'. Use
--stdin-name to change the name.
SEE ALSO
borg-common(1), borg-delete(1), borg-prune(1), borg-check(1), borg-patterns(1),
borg-placeholders(1), borg-compression(1)
AUTHOR
The Borg Collective
2020-12-24 BORG-CREATE(1)