Provided by: sane-utils_1.0.27-1~experimental3ubuntu2_amd64 bug


       scanimage - scan an image


       scanimage    [-d|--device-name   dev]   [--format   format]   [-i|--icc-profile   profile]
       [-L|--list-devices]    [-f|--formatted-device-list    format]    [-b|--batch    [=format]]
       [--batch-start start] [--batch-count count] [--batch-increment increment] [--batch-double]
       [--accept-md5-only]  [-p|--progress]   [-n|--dont-scan]   [-T|--test]   [-A|--all-options]
       [-h|--help]       [-v|--verbose]       [-B|--buffer-size      [=size]]      [-V|--version]


       scanimage is a command-line interface to control image acquisition devices such as flatbed
       scanners  or  cameras.  The device is controlled via command-line options.  After command-
       line processing, scanimage normally proceeds to acquire  an  image.   The  image  data  is
       written to standard output in one of the PNM (portable aNyMaP) formats (PBM for black-and-
       white images, PGM for grayscale images, and PPM for color images), TIFF format (black-and-
       white,  grayscale  or  color),  PNG  format,  or  JPEG  format.   scanimage accesses image
       acquisition devices through the SANE (Scanner Access Now  Easy)  interface  and  can  thus
       support  any device for which there exists a SANE backend (try apropos sane- to get a list
       of available backends).


       To get a list of devices:

         scanimage -L

       To scan with default settings to the file image.pnm:

         scanimage >image.pnm

       To scan 100x100 mm to the file image.tiff (-x  and  -y  may  not  be  available  with  all

         scanimage -x 100 -y 100 --format=tiff >image.tiff

       To print all available options:

         scanimage -h


       Remark:  Parameter are defined by the backends. So are --mode Gray and --mode Grayscale in
       use.  Please read the backend documentation first.

       Parameters are separated by a blank from single-character options (e.g.  -d epson) and  by
       a "=" from multi-character options (e.g. --device-name=epson).

       The   -d   or   --device-name  options  must  be  followed  by  a  SANE  device-name  like
       `epson:/dev/sg0' or `hp:/dev/usbscanner0'.  A (partial) list of available devices  can  be
       obtained  with  the  --list-devices  option  (see  below).  If no device-name is specified
       explicitly,   scanimage   reads   a   device-name   from    the    environment    variable
       SANE_DEFAULT_DEVICE.   If  this  variable  is  not set, scanimage will attempt to open the
       first available device.

       The --format format option selects how image data is written to standard  output.   format
       can be pnm, tiff, png, or jpeg.  If --format is not used, PNM is written.

       The -i or --icc-profile option is used to include an ICC profile into a TIFF file.

       The  -L  or --list-devices option requests a (partial) list of devices that are available.
       The list is not complete since some devices may be available, but are not listed in any of
       the  configuration  files  (which are typically stored in directory @CONFIGDIR@).  This is
       particularly the case when accessing scanners through the network.  If  a  device  is  not
       listed in a configuration file, the only way to access it is by its full device name.  You
       may need to consult your system administrator to find out the names of such devices.

       The -f or --formatted-device-list option works similar to --list-devices, but  requires  a
       format  string.   scanimage  replaces  the  placeholders %d %v %m %t %i %n with the device
       name, vendor name, model name, scanner type, an index number and newline respectively. The

              scanimage -f  scanner number %i device %d is a %t, model %m, produced by %v 

       will produce something like:

              scanner  number  0  device sharp:/dev/sg1 is  a  flatbed scanner, model JX250 SCSI,
              produced by SHARP

       The --batch* options provide the features for scanning documents using  document  feeders.
       --batch  [format]  is  used  to  specify the format of the filename that each page will be
       written to.  Each page is written out to a single file.  If format is not  specified,  the
       default  of  out%d.pnm  (or  out%d.tif  for  --format  tiff, out%d.png for --format png or
       out%d.jpg for -- format jpeg) will be used.  format is given as a printf style string with
       one  integer parameter.  --batch-start start selects the page number to start naming files
       with. If this option is not given, the counter  will  start  at  1.   --batch-count  count
       specifies  the  number of pages to attempt to scan.  If not given, scanimage will continue
       scanning until the scanner returns a state other than OK.  Not all scanners with  document
       feeders  signal  when  the  ADF  is  empty,  use  this  command to work around them.  With
       --batch-increment increment you can change the amount that the number in the  filename  is
       incremented  by.  Generally this is used when you are scanning double-sided documents on a
       single-sided document feeder.  A specific command is provided to aid this:  --batch-double
       will  automatically  set  the increment to 2.  --batch-prompt will ask for pressing RETURN
       before scanning a page. This can be used for scanning multiple pages without an  automatic
       document feeder.

       The  --accept-md5-only  option  only  accepts user authorization requests that support MD5
       security. The SANE network daemon (saned) is capable of doing such requests. See saned(8).

       The -p or --progress option requests that scanimage prints a progress  counter.  It  shows
       how  much  image  data  of  the  current  image has already been received by scanimage (in

       The -n or --dont-scan option requests that scanimage only sets the options provided by the
       user  but  doesn't  actually  perform a scan. This option can be used to e.g. turn off the
       scanner's lamp (if supported by the backend).

       The -T or --test option requests that scanimage performs a few simple sanity tests to make
       sure the backend works as defined by the SANE API (in particular the sane_read function is
       exercised by this test).

       The -A or --all-options option requests that scanimage lists all available options exposed
       the  backend, including button options.  The information is printed on standard output and
       no scan will be done.

       The -h or --help options request help information.  The information is printed on standard
       output and in this case, no attempt will be made to acquire an image.

       The  -v  or  --verbose  options increase the verbosity of the operation of scanimage.  The
       option may be specified repeatedly, each time increasing the verbosity level.

       The -B option without argument changes the input buffer size from the default 32KB to 1MB.
       For finer grained control, use --buffer-size= followed by the number of KB.

       The  -V  or  --version option requests that scanimage prints the program and package name,
       the version number of the SANE distribution that it came  with  and  the  version  of  the
       backend  that  it  loads.  Usually  that's  the dll backend. If more information about the
       version numbers of the backends are necessary, the DEBUG variable for the dll backend  can
       be used. Example: SANE_DEBUG_DLL=3 scanimage -L.

       As  you  might  imagine,  much  of  the power of scanimage comes from the fact that it can
       control any SANE backend.  Thus, the exact set of  command-line  options  depends  on  the
       capabilities  of  the  selected device.  To see the options for a device named dev, invoke
       scanimage via a command-line of the form:

              scanimage --help --device-name dev

       The documentation for the device-specific options printed by --help is best explained with
       a few examples:

        -l 0..218mm [0]
           Top-left x position of scan area.

              The  description  above  shows  that option -l expects an option value in the range
              from 0 to 218 mm.  The value in square brackets indicates that the  current  option
              value  is  0  mm.  Most  backends  provide  similar geometry options for top-left y
              position (-t), width (-x) and height of scan-area (-y).

        --brightness -100..100% [0]
           Controls the brightness of the acquired image.

              The description above shows that option --brightness expects an option value in the
              range  from  -100  to 100 percent.  The value in square brackets indicates that the
              current option value is 0 percent.

           Set default values for enhancement controls.

              The description above shows that option --default-enhancements has no option value.
              It  should be thought of as having an immediate effect at the point of the command-
              line at which it appears.  For example, since this option resets  the  --brightness
              option, the option-pair --brightness 50 --default-enhancements would effectively be
              a no-op.

        --mode Lineart|Gray|Color [Gray]
           Selects the scan mode (e.g., lineart or color).

              The description above shows that option --mode accepts an argument that must be one
              of  the strings Lineart, Gray, or Color.  The value in the square bracket indicates
              that the option is currently  set  to  Gray.   For  convenience,  it  is  legal  to
              abbreviate  the string values as long as they remain unique.  Also, the case of the
              spelling doesn't matter.  For example, option setting --mode col  is  identical  to
              --mode Color.

        --custom-gamma[=(yes|no)] [inactive]
           Determines whether a builtin or a custom gamma-table
           should be used.

              The  description  above  shows  that option --custom-gamma expects either no option
              value, a "yes" string, or a "no" string.  Specifying the option with  no  value  is
              equivalent  to  specifying  "yes".  The value in square-brackets indicates that the
              option is not currently active.  That is, attempting to set the option would result
              in  an  error  message.   The  set  of  available  options typically depends on the
              settings of other options.  For example, the --custom-gamma table might  be  active
              only when a grayscale or color scan-mode has been requested.

              Note  that  the  --help  option is processed only after all other options have been
              processed.  This makes it possible to see the option settings for a particular mode
              by  specifying  the  appropriate  mode-options  along  with the --help option.  For
              example, the command-line:

              scanimage --help --mode color

              would print the option settings that are in effect when the color-mode is selected.

        --gamma-table 0..255,...
           Gamma-correction table.  In color mode this option
           equally affects the red, green, and blue channels
           simultaneously (i.e., it is an intensity gamma table).

              The description above shows that option --gamma-table expects zero or  more  values
              in  the  range  0  to  255.   For  example,  a legal value for this option would be
              "3,4,5,6,7,8,9,10,11,12".  Since it's cumbersome to specify long  vectors  in  this
              form,  the  same  can be expressed by the abbreviated form "[0]3-[9]12".  What this
              means is that the first vector element is set to 3, the 9-th element is set  to  12
              and  the values in between are interpolated linearly.  Of course, it is possible to
              specify multiple such linear segments.  For example, "[0]3-[2]3-[6]7,[7]10-[9]6" is
              equivalent  to  "3,3,3,4,5,6,7,10,8,6".  The program gamma4scanimage can be used to
              generate such gamma tables (see gamma4scanimage(1) for details).

        --filename <string> [/tmp/input.ppm]
           The filename of the image to be loaded.

              The description above is an example of an option that  takes  an  arbitrary  string
              value (which happens to be a filename).  Again, the value in brackets show that the
              option is current set to the filename /tmp/input.ppm.


              The default device-name.


              This directory holds various configuration files.  For details, please refer to the
              manual pages listed below.

              This file contains lines of the form


              scanimage   uses   this   information   to   answer   user  authorization  requests
              automatically. The file must have 0600 permissions or stricter. You should use this
              file in conjunction with the --accept-md5-only option to avoid server-side attacks.
              The resource may contain any character but is limited to 127 characters.


       sane(7), gamma4scanimage(1), xscanimage(1), xcam(1),  xsane(1),  scanadf(1),  sane-dll(5),
       sane-net(5), sane-"backendname"(5)


       David  Mosberger,  Andreas  Beck, Gordon Matzigkeit, Caskey Dickson, and many others.  For
       questions     and     comments     contact     the     sane-devel     mailinglist     (see


       For  vector options, the help output currently has no indication as to how many elements a
       vector-value should have.

@PACKAGEVERSION@                           10 Jul 2008                               scanimage(1)