Provided by: swift-account_2.17.1-0ubuntu1_all 
NAME
account-server.conf - configuration file for the OpenStack Swift account server
SYNOPSIS
account-server.conf
DESCRIPTION
This is the configuration file used by the account server and other account background
services, such as; replicator, auditor and reaper.
The configuration file follows the python-pastedeploy syntax. The file is divided into
sections, which are enclosed by square brackets. Each section will contain a certain
number of key/value parameters which are described later.
Any line that begins with a '#' symbol is ignored.
You can find more information about python-pastedeploy configuration format at
http://pythonpaste.org/deploy/#config-format
GLOBAL SECTION
This is indicated by section named [DEFAULT]. Below are the parameters that are acceptable
within this section.
bind_ip
IP address the account server should bind to. The default is 0.0.0.0 which will
make it bind to all available addresses.
bind_port
TCP port the account server should bind to. The default is 6202.
bind_timeout
Timeout to bind socket. The default is 30.
backlog
TCP backlog. Maximum number of allowed pending connections. The default value is
4096.
workers
The number of pre-forked processes that will accept connections. Zero means no
fork. The default is auto which will make the server try to match the number of
effective cpu cores if python multiprocessing is available (included with most
python distributions >= 2.6) or fallback to one. It's worth noting that individual
workers will use many eventlet co-routines to service multiple concurrent requests.
max_clients
Maximum number of clients one worker can process simultaneously (it will actually
accept(2) N + 1). Setting this to one (1) will only handle one request at a time,
without accepting another request concurrently. The default is 1024.
user The system user that the account server will run as. The default is swift.
swift_dir
Swift configuration directory. The default is /etc/swift.
devices
Parent directory of where devices are mounted. Default is /srv/node.
mount_check
Whether or not check if the devices are mounted to prevent accidentally writing to
the root device. The default is set to true.
disable_fallocate
Disable pre-allocate disk space for a file. The default is false.
log_name
Label used when logging. The default is swift.
log_facility
Syslog log facility. The default is LOG_LOCAL0.
log_level
Logging level. The default is INFO.
log_address
Logging address. The default is /dev/log.
log_max_line_length
The following caps the length of log lines to the value given; no limit if set to
0, the default.
log_custom_handlers
Comma separated list of functions to call to setup custom log handlers. functions
get passed: conf, name, log_to_console, log_route, fmt, logger, adapted_logger. The
default is empty.
log_udp_host
If set, log_udp_host will override log_address.
log_udp_port
UDP log port, the default is 514.
log_statsd_host
StatsD server. IPv4/IPv6 addresses and hostnames are supported. If a hostname
resolves to an IPv4 and IPv6 address, the IPv4 address will be used.
log_statsd_port
The default is 8125.
log_statsd_default_sample_rate
The default is 1.
log_statsd_sample_rate_factor
The default is 1.
log_statsd_metric_prefix
The default is empty.
db_preallocation
If you don't mind the extra disk space usage in overhead, you can turn this on to
preallocate disk space with SQLite databases to decrease fragmentation. The
default is false.
eventlet_debug
Debug mode for eventlet library. The default is false.
fallocate_reserve
You can set fallocate_reserve to the number of bytes or percentage of disk space
you'd like fallocate to reserve, whether there is space for the given file size or
not. Percentage will be used if the value ends with a '%'. The default is 1%.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority of
the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.
PIPELINE SECTION
This is indicated by section name [pipeline:main]. Below are the parameters that are
acceptable within this section.
pipeline
It is used when you need apply a number of filters. It is a list of filters ended
by an application. The normal pipeline is "healthcheck recon account-server".
APP SECTION
This is indicated by section name [app:account-server]. Below are the parameters that are
acceptable within this section.
use Entry point for paste.deploy for the account server. This is the reference to the
installed python egg. This is normally egg:swift#account.
set log_name
Label used when logging. The default is account-server.
set log_facility
Syslog log facility. The default is LOG_LOCAL0.
set log_level
Logging level. The default is INFO.
set log_requests
Enables request logging. The default is True.
set log_address
Logging address. The default is /dev/log.
auto_create_account_prefix
The default is ".".
replication_server
Configure parameter for creating specific server. To handle all verbs, including
replication verbs, do not specify "replication_server" (this is the default). To
only handle replication, set to a true value (e.g. "true" or "1"). To handle only
non-replication verbs, set to "false". Unless you have a separate replication
network, you should not specify any value for "replication_server". The default is
empty.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority of
the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.
FILTER SECTION
Any section that has its name prefixed by "filter:" indicates a filter section. Filters
are used to specify configuration parameters for specific swift middlewares. Below are
the filters available and respective acceptable parameters.
[filter:healthcheck]
use Entry point for paste.deploy for the healthcheck middleware. This is the
reference to the installed python egg. This is normally egg:swift#healthcheck.
disable_path
An optional filesystem path which, if present, will cause the healthcheck URL to
return "503 Service Unavailable" with a body of "DISABLED BY FILE".
[filter:recon]
use Entry point for paste.deploy for the recon middleware. This is the reference to
the installed python egg. This is normally egg:swift#recon.
recon_cache_path
The recon_cache_path simply sets the directory where stats for a few items will
be stored. Depending on the method of deployment you may need to create this
directory manually and ensure that swift has read/write. The default is
/var/cache/swift.
[filter:xprofile]
use Entry point for paste.deploy for the xprofile middleware. This is the reference
to the installed python egg. This is normally egg:swift#xprofile.
profile_module
This option enable you to switch profilers which should inherit from python
standard profiler. Currently the supported value can be 'cProfile',
'eventlet.green.profile' etc.
log_filename_prefix
This prefix will be used to combine process ID and timestamp to name the profile
data file. Make sure the executing user has permission to write into this path
(missing path segments will be created, if necessary). If you enable profiling
in more than one type of daemon, you must override it with an unique value like,
the default is /var/log/swift/profile/account.profile.
dump_interval
The profile data will be dumped to local disk based on above naming rule in this
interval. The default is 5.0.
dump_timestamp
Be careful, this option will enable profiler to dump data into the file with
time stamp which means there will be lots of files piled up in the directory.
The default is false
path This is the path of the URL to access the mini web UI. The default is
__profile__.
flush_at_shutdown
Clear the data when the wsgi server shutdown. The default is false.
unwind Unwind the iterator of applications. Default is false.
ADDITIONAL SECTIONS
The following sections are used by other swift-account services, such as replicator,
auditor and reaper.
[account-replicator]
log_name
Label used when logging. The default is account-replicator.
log_facility
Syslog log facility. The default is LOG_LOCAL0.
log_level
Logging level. The default is INFO.
log_address
Logging address. The default is /dev/log.
per_diff
Maximum number of database rows that will be sync'd in a single HTTP replication
request. The default is 1000.
max_diffs
This caps how long the replicator will spend trying to sync a given database per
pass so the other databases don't get starved. The default is 100.
concurrency
Number of replication workers to spawn. The default is 8.
run_pause [deprecated]
Time in seconds to wait between replication passes. The default is 30.
interval
Replaces run_pause with the more standard "interval", which means the replicator
won't pause unless it takes less than the interval set. The default is 30.
node_timeout
Request timeout to external services. The default is 10 seconds.
conn_timeout
Connection timeout to external services. The default is 0.5 seconds.
reclaim_age
Time elapsed in seconds before an account can be reclaimed. The default is
604800 seconds.
rsync_compress
Allow rsync to compress data which is transmitted to destination node during
sync. However, this is applicable only when destination node is in a different
region than the local one. The default is false.
rsync_module
Format of the rsync module where the replicator will send data. See
etc/rsyncd.conf-sample for some usage examples.
recon_cache_path
Path to recon cache directory. The default is /var/cache/swift.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority
of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is
set.
[account-auditor]
log_name
Label used when logging. The default is account-auditor.
log_facility
Syslog log facility. The default is LOG_LOCAL0.
log_level
Logging level. The default is INFO.
log_address
Logging address. The default is /dev/log.
interval
Will audit, at most, 1 account per device per interval. The default is 1800
seconds.
accounts_per_second
Maximum accounts audited per second. Should be tuned according to individual
system specs. 0 is unlimited. The default is 200.
recon_cache_path
Path to recon cache directory. The default is /var/cache/swift.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority
of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is
set.
[account-reaper]
log_name
Label used when logging. The default is account-reaper.
log_facility
Syslog log facility. The default is LOG_LOCAL0.
log_level
Logging level. The default is INFO.
log_address
Logging address. The default is /dev/log.
concurrency
Number of reaper workers to spawn. The default is 25.
interval
Minimum time for a pass to take. The default is 3600 seconds.
node_timeout
Request timeout to external services. The default is 10 seconds.
conn_timeout
Connection timeout to external services. The default is 0.5 seconds.
delay_reaping
Normally, the reaper begins deleting account information for deleted accounts
immediately; you can set this to delay its work however. The value is in
seconds. The default is 0. The sum of this value and the container-updater
interval should be less than the account-replicator reclaim_age. This ensures
that once the account-reaper has deleted a container there is sufficient time
for the container-updater to report to the account before the account DB is
removed.
reap_warn_after
If the account fails to be be reaped due to a persistent error, the account
reaper will log a message such as:
Account <name> has not been reaped since <date> You can search logs for this
message if space is not being reclaimed after you delete account(s). Default is
2592000 seconds (30 days). This is in addition to any time requested by
delay_reaping.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority
of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is
set.
DOCUMENTATION
More in depth documentation about the swift-account-server and also OpenStack Swift as a
whole can be found at https://docs.openstack.org/swift/latest/admin_guide.html and
https://docs.openstack.org/swift/latest/
SEE ALSO
swift-account-server(1),