Ubuntu Manpage: ffproxy.conf — filtering HTTP/HTTPS proxy server configuration file

NAME

     ffproxy.conf — filtering HTTP/HTTPS proxy server configuration file

DESCRIPTION

     ffproxy is a filtering HTTP/HTTPS proxy server.  It is able to filter by host, URL, and
     header.  Custom header entries can be filtered and added.  It can even drop its privileges
     and optionally chroot(2) to some directory.  Logging to syslog(3) is supported, as is using
     another auxiliary proxy server.  An HTTP accelerator feature (acting as a front-end to an
     HTTP server) is included.  Contacting IPv6 servers as well as binding to IPv6 is supported
     and allows transparent IPv6 over IPv4 browsing (and vice versa).

     This manual describes how to use configuration files with the program and documents the
     options.

USING CONFIGURATION FILES

Default ffproxy.conf
If the command line parameters -f or -F are not used, the proxy tries to open
/etc/ffproxy/ffproxy.conf. If this file does not exist, the program continues execution.

User Configuration File
Use command line parameter -f to load a non-default configuration file. You will notice the
warning at the program's startup. This is due to the programs implementation that allows
one to reload all configuration files. To disable the warning, use -F instead.

Deactivating
To use command line options only, use -f "".

Reloading Configuration
To let the proxy reload its configuration files, that is, besides the configuration file
specified, the contents of db/ and html/, send the signal HUP to the program's master
process. ffproxy pid can be found by default in file /var/run/ffproxy.pid, you can override
/var/run directory with command line parameter -n or with pid_dir setting in config file.

Options that can be successfully altered at runtime are

child_processes
use_ipv6
use_syslog
log_all_requests
forward_proxy
forward_proxy_port
forward_proxy_ipv6
accel_host
accel_port
accel_user_host
use_keep_alive
unrestricted_connect
timeout_connect
backlog_size

Set `accel_port 0' or `forward_proxy_port 0' to explicitly disable acceleration or auxiliary
proxy. Commenting out options is not sufficient, since configuration options may only
overwritten.

Changes to other options not mentioned above get silently ignored.

CONFIGURATION OPTIONS

     #
     # lines starting with '#' are comments
     #

     # run as daemon?
     # (default: no)
     #daemonize yes
     #daemonize no

     # number of child processes,
     # that is, the maximum number of concurrent requests
     # (default: 10)
     #child_processes 10

     # ffproxy binds to any IPv4 address
     # and any IPv6 address by default
     #
     # bind to IPv4?  (default: yes)
     #bind_ipv4 no
     #bind_ipv4 yes
     # bind to IPv6?  (default: yes)
     #bind_ipv6 no
     #bind_ipv6 yes
     #
     # Hostname or IP to bind to
     # (default is any IP)
     #
     #bind_ipv4_host 192.168.10.1
     #bind_ipv4_host martyr.burden.eu.org
     #bind_ipv6_host ::1
     #bind_ipv6_host oz.burden.eu.org

     # listen on port
     # (default: 8080)
     #port 1111
     #port 8080

     # use IPv6 when contacting servers?
     # (default: yes)
     #use_ipv6 no
     #use_ipv6 yes

     # use syslog?
     # (default: yes)
     #use_syslog no
     #use_syslog yes

     # log all requests?
     # (default: no)
     # to use, set also use_syslog to yes
     #log_all_requests yes
     #log_all_requests no

     # change UID and GID
     #
     # to use, both uid and gid must be set
     # (disabled by default)
     #uid proxy
     #gid proxy
     #uid 37
     #gid 38

     # change root to (only in connection with uid and gid change)
     #   /etc/resolv.conf might need to be copied
     #   to chroot_dir/etc/resolv.conf
     # (disabled by default)
     #chroot_dir /usr/share/ffproxy

     # forward to proxy (auxiliary proxy)
     # (set `forward_proxy_port 0' to explicitly disable feature
     #  (i.e, when reloading configuration file via SIGHUP))
     # (disabled by default)
     #forward_proxy blackness.burden.eu.org
     #forward_proxy 192.168.10.5
     #forward_proxy ::1
     #forward_proxy_port 8082
     #forward_proxy_port 0

     # try IPv6 for auxiliary proxy?
     # use_ipv6 must be set to yes, too
     # (default: yes)
     #forward_proxy_ipv6 no
     #forward_proxy_ipv6 yes

     # path to db/ and html/ directories
     # (default: /usr/share/ffproxy)
     # (Note: if ffproxy runs chrooted,
     #  give a path name relative to new root, or,
     #  if db_files_path is the same as root, use db_files_path ./
     #  You have to start ffproxy in the new root directory,
     #  otherwise it won't find the database files.
     #  Please keep in mind that ffproxy's config file has to
     #  be within chroot directory, otherwise it will not find
     #  its config file on reload)
     #db_files_path ./
     #db_files_path /usr/share/ffproxy

     # http accelerator
     # (disabled by default)
     #
     # if you want to use ffproxy as http accelerator (that is, connecting
     # to just one http server and beeing used as front-end to that, e.g.
     # in DMZ) uncomments options below (port is optional, defaults to 80)
     # (set `accel_port 0' to explicitly disable feature
     #  (i.e, when reloading configuration file via SIGHUP))
     #accel_host 10.254.1.2
     #accel_host revelation.martyr.eu.org
     #accel_port 80
     #accel_port 0
     #
     # Omit Host: accel_host:accel_port in Header
     # to provide own Host: header via db/filter.header.add?
     # (default: yes)
     #accel_user_host no
     #accel_user_host yes

     # keep alive on client to proxy connections
     # (enabled by default)
     #use_keep_alive no
     #use_keep_alive yes

     # allow CONNECT request to other than port 443 (HTTPS)
     # (CONNECT enables HTTPS proxying)
     # (disabled by default for security)
     #unrestricted_connect yes
     #unrestricted_connect no

     # timeout for CONNECT requests in seconds
     # (default: 5)
     #timeout_connect 20
     #timeout_connect 5

     # backlog size for accept()
     # (default: 4)
     #backlog_size 16
     #backlog_size 4

     # directory to store file ffproxy.pid (with ffproxy pid inside)
     # (default: /var/run)
     #pid_dir /tmp
     #pid_dir /var/run

VERSION

     This manual documents ffproxy 1.6 (2005-01-05).

FILES