bionic (5) rancid.types.base.5.gz

Provided by: rancid_3.7-1_amd64 bug

NAME

       rancid.types.conf - rancid device type configuration file

DESCRIPTION

       rancid.types.conf  contains formatted configuration lines that define the device types that are available
       for use in the <device_type> field of the router.db(5) configuration file.

       The rancid.types.base configuration file follows the same format but defines the base types described  in
       router.db(5).

       Users are STRONGLY discouraged from altering this file or overriding the base types in rancid.types.conf.
       Instead, copy the type definition to be altered  from  rancid.types.base  to  rancid.types.conf  using  a
       different <device_type>.

SYNTAX

       One directive is listed per-line, where the syntax is one of:

                 <device_type>;command;<filter_function>;<device_command_string>
                 <device_type>;inloop;<input_loop_function>
                 <device_type>;login;<login_program>
                 <device_type>;module;<perl_module_name>
                 <device_type>;prescript;<rancid_script> XXX temporary knob?  add this?
                 <device_type>;postscript;<rancid_script> XXX temporary knob?  add this?
                 <device_type>;script;<rancid_script>
                 <device_type>;timeout;<login_program_timeout>

       For example:
                 cisco;login;clogin
                 cisco;timeout;120
                 cisco;module;rancid::ios
                 cisco;inloop;ios::inloop
                 cisco;command;ShowVersion;show version
                 juniper;login;/usr/local/bin/jlogin
                 juniper;module;rancid::junos
                 juniper;inloop;junos::inloop
                 juniper;command;ShowVersion;show version

       <device_type>  is a lower case name used in the router.db(5) file.  Its case is forced to lower case when
       reading the configuration files.

       Each <device_type> may have the following directives  defined.   The  login  and  script  directives  are
       required.

       command
              Defines commands to run for the <device_type> and the function that will process the input.

       inloop Intended for rancid(1), inloop defines a function to loop over the input from the device.  It must
              have the calling signature f($INPUT, $OUTPUT).

       login  Defines the login script used for the <device_type>, which does not need to be an FQPN,  but  then
              must be found in the path.

       module Loads  a  rancid  perl  module  to  supply  functions  used  in  the  command  directives  for the
              <device_type>.  Multiple module lines may exist for a device type, they are loaded  in  the  order
              they appear.

       script Defines  the rancid script used for the <device_type>, which does not need to be an FQPN, but then
              must be found in the path.

       timeout
              Defines the rancid login script timeout in seconds.  In general, the default 90 seconds, but  some
              modules themselves alter this.

FILES

       /etc/rancid/rancid.types.conf
              Configuration file described here.

       /etc/rancid/rancid.types.base
              Configuration file described here.

SEE ALSO

       control_rancid(1), rancid(1), rancid-run(1), router.db(5), rancid(3)

                                                  18 July 2017                              rancid.types.conf(5)