NAME

       sane-nec - SANE backend for NEC scanners

DESCRIPTION

       The sane-nec library implements a SANE (Scanner Access Now Easy) backend that provides access to NEC SCSI
       scanners.  This backend should be considered alpha-quality software!  In the current state it is known to
       work  with  PC-IN500/4C  scanners.  Another MultiReader scanner series is not supported. PC-IN 500/4C and
       MultiReader scanner are only sold in Japan.(except Multi Reader PetiScan.)

       For other scanners, it may or may not work.

       The backend has the following known problems:
              - ColorLineart mode is not supported.
              - device name is fixed to /dev/scanner

       At present, the following scanners are known to work with this backend.
              Vendor Product id
              ------ -----------
              NEC    PC-IN500/4C

FILES

       @CONFIGDIR@/nec.conf
              The backend configuration file.

       @LIBDIR@/libsane-nec.a
              The static library implementing this backend.

       @LIBDIR@/libsane-nec.so
              The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT

       SANE_DEBUG_NEC
              If the library was compiled with debug support enabled, this  environment  variable  controls  the
              debug  level  for  this  backend.   E.g.,  a value of 128 requests all debug output to be printed.
              Smaller levels reduce verbosity.

SEE ALSO

       sane(7), sane-scsi(5)

AUTHORS

       Kazuya Fukuda

@PACKAGEVERSION@                                   14 Jul 2008                                       sane-nec(5)