Provided by: sssd-krb5_1.16.1-1ubuntu1.8_amd64 
NAME
sssd-krb5 - SSSD Kerberos provider
DESCRIPTION
This manual page describes the configuration of the Kerberos 5 authentication backend for
sssd(8). For a detailed syntax reference, please refer to the “FILE FORMAT” section of the
sssd.conf(5) manual page.
The Kerberos 5 authentication backend contains auth and chpass providers. It must be
paired with an identity provider in order to function properly (for example, id_provider =
ldap). Some information required by the Kerberos 5 authentication backend must be provided
by the identity provider, such as the user's Kerberos Principal Name (UPN). The
configuration of the identity provider should have an entry to specify the UPN. Please
refer to the man page for the applicable identity provider for details on how to configure
this.
This backend also provides access control based on the .k5login file in the home directory
of the user. See .k5login(5) for more details. Please note that an empty .k5login file
will deny all access to this user. To activate this feature, use 'access_provider = krb5'
in your SSSD configuration.
In the case where the UPN is not available in the identity backend, sssd will construct a
UPN using the format username@krb5_realm.
CONFIGURATION OPTIONS
If the auth-module krb5 is used in an SSSD domain, the following options must be used. See
the sssd.conf(5) manual page, section “DOMAIN SECTIONS”, for details on the configuration
of an SSSD domain.
krb5_server, krb5_backup_server (string)
Specifies the comma-separated list of IP addresses or hostnames of the Kerberos
servers to which SSSD should connect, in the order of preference. For more information
on failover and server redundancy, see the “FAILOVER” section. An optional port number
(preceded by a colon) may be appended to the addresses or hostnames. If empty, service
discovery is enabled; for more information, refer to the “SERVICE DISCOVERY” section.
When using service discovery for KDC or kpasswd servers, SSSD first searches for DNS
entries that specify _udp as the protocol and falls back to _tcp if none are found.
This option was named “krb5_kdcip” in earlier releases of SSSD. While the legacy name
is recognized for the time being, users are advised to migrate their config files to
use “krb5_server” instead.
krb5_realm (string)
The name of the Kerberos realm. This option is required and must be specified.
krb5_kpasswd, krb5_backup_kpasswd (string)
If the change password service is not running on the KDC, alternative servers can be
defined here. An optional port number (preceded by a colon) may be appended to the
addresses or hostnames.
For more information on failover and server redundancy, see the “FAILOVER” section.
NOTE: Even if there are no more kpasswd servers to try, the backend is not switched to
operate offline if authentication against the KDC is still possible.
Default: Use the KDC
krb5_ccachedir (string)
Directory to store credential caches. All the substitution sequences of
krb5_ccname_template can be used here, too, except %d and %P. The directory is created
as private and owned by the user, with permissions set to 0700.
Default: /tmp
krb5_ccname_template (string)
Location of the user's credential cache. Three credential cache types are currently
supported: “FILE”, “DIR” and “KEYRING:persistent”. The cache can be specified either
as TYPE:RESIDUAL, or as an absolute path, which implies the “FILE” type. In the
template, the following sequences are substituted:
%u
login name
%U
login UID
%p
principal name
%r
realm name
%h
home directory
%d
value of krb5_ccachedir
%P
the process ID of the SSSD client
%%
a literal '%'
If the template ends with 'XXXXXX' mkstemp(3) is used to create a unique filename in a
safe way.
When using KEYRING types, the only supported mechanism is “KEYRING:persistent:%U”,
which uses the Linux kernel keyring to store credentials on a per-UID basis. This is
also the recommended choice, as it is the most secure and predictable method.
The default value for the credential cache name is sourced from the profile stored in
the system wide krb5.conf configuration file in the [libdefaults] section. The option
name is default_ccache_name. See krb5.conf(5)'s PARAMETER EXPANSION paragraph for
additional information on the expansion format defined by krb5.conf.
NOTE: Please be aware that libkrb5 ccache expansion template from krb5.conf(5) uses
different expansion sequences than SSSD.
Default: (from libkrb5)
krb5_auth_timeout (integer)
Timeout in seconds after an online authentication request or change password request
is aborted. If possible, the authentication request is continued offline.
Default: 6
krb5_validate (boolean)
Verify with the help of krb5_keytab that the TGT obtained has not been spoofed. The
keytab is checked for entries sequentially, and the first entry with a matching realm
is used for validation. If no entry matches the realm, the last entry in the keytab is
used. This process can be used to validate environments using cross-realm trust by
placing the appropriate keytab entry as the last entry or the only entry in the keytab
file.
Default: false
krb5_keytab (string)
The location of the keytab to use when validating credentials obtained from KDCs.
Default: /etc/krb5.keytab
krb5_store_password_if_offline (boolean)
Store the password of the user if the provider is offline and use it to request a TGT
when the provider comes online again.
NOTE: this feature is only available on Linux. Passwords stored in this way are kept
in plaintext in the kernel keyring and are potentially accessible by the root user
(with difficulty).
Default: false
krb5_renewable_lifetime (string)
Request a renewable ticket with a total lifetime, given as an integer immediately
followed by a time unit:
s for seconds
m for minutes
h for hours
d for days.
If there is no unit given, s is assumed.
NOTE: It is not possible to mix units. To set the renewable lifetime to one and a half
hours, use '90m' instead of '1h30m'.
Default: not set, i.e. the TGT is not renewable
krb5_lifetime (string)
Request ticket with a lifetime, given as an integer immediately followed by a time
unit:
s for seconds
m for minutes
h for hours
d for days.
If there is no unit given s is assumed.
NOTE: It is not possible to mix units. To set the lifetime to one and a half hours
please use '90m' instead of '1h30m'.
Default: not set, i.e. the default ticket lifetime configured on the KDC.
krb5_renew_interval (string)
The time in seconds between two checks if the TGT should be renewed. TGTs are renewed
if about half of their lifetime is exceeded, given as an integer immediately followed
by a time unit:
s for seconds
m for minutes
h for hours
d for days.
If there is no unit given, s is assumed.
NOTE: It is not possible to mix units. To set the renewable lifetime to one and a half
hours, use '90m' instead of '1h30m'.
If this option is not set or is 0 the automatic renewal is disabled.
Default: not set
krb5_use_fast (string)
Enables flexible authentication secure tunneling (FAST) for Kerberos
pre-authentication. The following options are supported:
never use FAST. This is equivalent to not setting this option at all.
try to use FAST. If the server does not support FAST, continue the authentication
without it.
demand to use FAST. The authentication fails if the server does not require fast.
Default: not set, i.e. FAST is not used.
NOTE: a keytab is required to use FAST.
NOTE: SSSD supports FAST only with MIT Kerberos version 1.8 and later. If SSSD is used
with an older version of MIT Kerberos, using this option is a configuration error.
krb5_fast_principal (string)
Specifies the server principal to use for FAST.
krb5_canonicalize (boolean)
Specifies if the host and user principal should be canonicalized. This feature is
available with MIT Kerberos 1.7 and later versions.
Default: false
krb5_use_kdcinfo (boolean)
Specifies if the SSSD should instruct the Kerberos libraries what realm and which KDCs
to use. This option is on by default, if you disable it, you need to configure the
Kerberos library using the krb5.conf(5) configuration file.
See the sssd_krb5_locator_plugin(8) manual page for more information on the locator
plugin.
Default: true
krb5_use_enterprise_principal (boolean)
Specifies if the user principal should be treated as enterprise principal. See section
5 of RFC 6806 for more details about enterprise principals.
Default: false (AD provider: true)
The IPA provider will set to option to 'true' if it detects that the server is capable
of handling enterprise principals and the option is not set explicitly in the config
file.
krb5_map_user (string)
The list of mappings is given as a comma-separated list of pairs “username:primary”
where “username” is a UNIX user name and “primary” is a user part of a kerberos
principal. This mapping is used when user is authenticating using “auth_provider =
krb5”.
example:
krb5_realm = REALM
krb5_map_user = joe:juser,dick:richard
“joe” and “dick” are UNIX user names and “juser” and “richard” are primaries of
kerberos principals. For user “joe” resp. “dick” SSSD will try to kinit as
“juser@REALM” resp. “richard@REALM”.
Default: not set
FAILOVER
The failover feature allows back ends to automatically switch to a different server if the
current server fails.
Failover Syntax
The list of servers is given as a comma-separated list; any number of spaces is allowed
around the comma. The servers are listed in order of preference. The list can contain any
number of servers.
For each failover-enabled config option, two variants exist: primary and backup. The idea
is that servers in the primary list are preferred and backup servers are only searched if
no primary servers can be reached. If a backup server is selected, a timeout of 31 seconds
is set. After this timeout SSSD will periodically try to reconnect to one of the primary
servers. If it succeeds, it will replace the current active (backup) server.
The Failover Mechanism
The failover mechanism distinguishes between a machine and a service. The back end first
tries to resolve the hostname of a given machine; if this resolution attempt fails, the
machine is considered offline. No further attempts are made to connect to this machine for
any other service. If the resolution attempt succeeds, the back end tries to connect to a
service on this machine. If the service connection attempt fails, then only this
particular service is considered offline and the back end automatically switches over to
the next service. The machine is still considered online and might still be tried for
another service.
Further connection attempts are made to machines or services marked as offline after a
specified period of time; this is currently hard coded to 30 seconds.
If there are no more machines to try, the back end as a whole switches to offline mode,
and then attempts to reconnect every 30 seconds.
Failover time outs and tuning
Resolving a server to connect to can be as simple as running a single DNS query or can
involve several steps, such as finding the correct site or trying out multiple host names
in case some of the configured servers are not reachable. The more complex scenarios can
take some time and SSSD needs to balance between providing enough time to finish the
resolution process but on the other hand, not trying for too long before falling back to
offline mode. If the SSSD debug logs show that the server resolution is timing out before
a live server is contacted, you can consider changing the time outs.
This section lists the available tunables. Please refer to their description in the
sssd.conf(5), manual page.
dns_resolver_op_timeout
How long would SSSD talk to a single DNS server.
dns_resolver_timeout
How long would SSSD try to resolve a failover service. This service resolution
internally might include several steps, such as resolving DNS SRV queries or locating
the site.
For LDAP-based providers, the resolve operation is performed as part of an LDAP connection
operation. Thefore, also the “ldap_opt_timeout>” timeout should be set to a larger value
than “dns_resolver_timeout” which in turn should be set to a larger value than
“dns_resolver_op_timeout”.
SERVICE DISCOVERY
The service discovery feature allows back ends to automatically find the appropriate
servers to connect to using a special DNS query. This feature is not supported for backup
servers.
Configuration
If no servers are specified, the back end automatically uses service discovery to try to
find a server. Optionally, the user may choose to use both fixed server addresses and
service discovery by inserting a special keyword, “_srv_”, in the list of servers. The
order of preference is maintained. This feature is useful if, for example, the user
prefers to use service discovery whenever possible, and fall back to a specific server
when no servers can be discovered using DNS.
The domain name
Please refer to the “dns_discovery_domain” parameter in the sssd.conf(5) manual page for
more details.
The protocol
The queries usually specify _tcp as the protocol. Exceptions are documented in respective
option description.
See Also
For more information on the service discovery mechanism, refer to RFC 2782.
EXAMPLE
The following example assumes that SSSD is correctly configured and FOO is one of the
domains in the [sssd] section. This example shows only configuration of Kerberos
authentication; it does not include any identity provider.
[domain/FOO]
auth_provider = krb5
krb5_server = 192.168.1.1
krb5_realm = EXAMPLE.COM
SEE ALSO
sssd(8), sssd.conf(5), sssd-ldap(5), sssd-krb5(5), sssd-simple(5), sssd-ipa(5), sssd-
ad(5), sssd-sudo(5), sssd-secrets(5), sssd-session-recording(5), sss_cache(8),
sss_debuglevel(8), sss_groupadd(8), sss_groupdel(8), sss_groupshow(8), sss_groupmod(8),
sss_useradd(8), sss_userdel(8), sss_usermod(8), sss_obfuscate(8), sss_seed(8),
sssd_krb5_locator_plugin(8), sss_ssh_authorizedkeys(8), sss_ssh_knownhostsproxy(8), sssd-
ifp(5), pam_sss(8). sss_rpcidmapd(5) sssd-systemtap(5)
AUTHORS
The SSSD upstream - https://pagure.io/SSSD/sssd/