Provided by: cpl-plugin-sinfo-doc_3.0.0+dfsg-1_all 
NAME
sinfo_rec_wavecal - Wavelength calibration and slitpos determination
SYNOPSIS
esorex sinfo_rec_wavecal [OPTIONS] FILE.sof
DESCRIPTION
This recipe performs wavelength calibration.
The input files are on/off arc lamp frames with tag WAVE_LAMP Master calibration frame
input is: A corresponding (band) reference line table with tag REF_LINE_ARC A
corresponding (band) distortion table with tag DISTORTION A corresponding (band,preoptic)
master flat with tag MASTER_FLAT_LAMP A corresponding (band,preoptics) master bad pixel
map with tag MASTER_BP_MAP If wcal-estimate_ind=TRUE, a corresponding (band,preoptics)
slitlet position guess table SLIT_POS_GUESS (for example a copy of the SLIT_POS product)
If wcal-calib_indicator=FALSE, a corresponding (band,preoptics) parabolic fit coefficients
table WAVE_COEF_SLIT If sinfoni.wavecal.slitpos_boostrap_switch=FALSE
(wcal-calib-slitpos_bootstrap=0), a corresponding (band,preoptics) slitlets position table
with tag SLIT_POS The main products are: The master flat field corrected for distortions
(PRO.CATG=MFLAT_STACKED_DIST) The arc lamp frames stacked (PRO.CATG=WAVE_LAMP_STACKED) The
wavelength map (PRO.CATG=WAVE_MAP) The slitlet position table (PRO.CATG=SLIT_POS) A
parabolic fit coefficients table (PRO.CATG=WAVE_COEF_SLIT) Parameters relative to arc lamp
line fit: (PRO.CATG=WAVE_FIT_PARAMS)
OPTIONS
--gen-overpar <bool>
Overwrite DRS ini parameters: (bool; default: True). The full name of this option
for the EsoRex configuration file is sinfoni.general.overwrite_parameters [default
= True].
--lc_sw <bool>
Correct for bad lines introduced by instrument software: (bool; default: False).
The full name of this option for the EsoRex configuration file is
sinfoni.general.lc_sw [default = False].
--lc_kappa <long>
Kappa sigma value (long; default: 18). The full name of this option for the EsoRex
configuration file is sinfoni.general.lc_kappa [default = 18].
--lc_filt_rad <long>
Filtering radii applied during median filter. Should be small (long; default: 3).
The full name of this option for the EsoRex configuration file is
sinfoni.general.lc_filt_rad [default = 3].
--product-density <long>
Density of pipeline products: 0 (low), 1 (low+skycor), 2 (med-QC), 3
(high-debug+skycor) (long; default: 2). The full name of this option for the EsoRex
configuration file is sinfoni.product.density [default = 2].
--stack-lo_rej <float>
lower rejection (float; default: 0.1). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.low_rejection [default = 0.1].
--stack-hi_rej <float>
higher rejection (float; default: 0.1). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.high_rejection [default = 0.1].
--stack-flat_ind <bool>
Flat Index: (bool; default: True). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.flat_index [default = True].
--stack-mflat_norm_smooth <long>
Normalize master flat to its smoothed value (to remove lamp response curve). 0 (no
smooth). 1 (apply fft filter along y).2 (apply running median filter along y).
(long; default: 0). The full name of this option for the EsoRex configuration file
is sinfoni.stacked.mflat_norm_smooth [default = 0].
--stack-mflat_smooth_rad <long>
Normalization smoothing radii (long; default: 16). The full name of this option
for the EsoRex configuration file is sinfoni.stacked.mflat_smooth_rad [default =
16].
--stack-mask_ind <long>
BP Mask Interpolation Switch: indicates if the bad pixel mask should be applied (1)
or not (0) (long; default: 1). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.mask_index [default = 1].
--stack-ind_ind <bool>
indicates if the bad pixels should be indicated (yes) or interpolated (no) (bool;
default: False). The full name of this option for the EsoRex configuration file is
sinfoni.stacked.ind_index [default = False].
--stack-mask_rad <long>
Max distance bad-good pix: (long; default: 4). The full name of this option for
the EsoRex configuration file is sinfoni.stacked.mask_rad [default = 4].
--stack-gauss_ind <bool>
Gaussian Convolution Switch: (bool; default: False). The full name of this option
for the EsoRex configuration file is sinfoni.stacked.gauss_index [default = False].
--stack-khw <long>
Kernel Half Width (long; default: 2). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.kernel_half_width [default = 2].
--stack-warpfix_ind <bool>
Warp Fix Index: (bool; default: True). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.warpfix_ind [default = True].
--stack-warpfix_kernel <str>
Warpfix kernel: (str; default: ´tanh´). The full name of this option for the
EsoRex configuration file is sinfoni.stacked.warpfix_kernel [default = tanh].
--stack-qc_thresh_min <long>
qc_thresh_min (long; default: 0). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.qc_thresh_min [default = 0].
--stack-qc_thresh_max <long>
qc_thresh_max (long; default: 49000). The full name of this option for the EsoRex
configuration file is sinfoni.stacked.qc_thresh_max [default = 49000].
--stack-sub_raw_sky <bool>
indicates if the raw sky frame should be subtracted (TRUE) or (FALSE) (bool;
default: True). The full name of this option for the EsoRex configuration file is
sinfoni.stacked.sub_raw_sky [default = True].
--wcal-slitpos_bootstrap <bool>
Switch to get a new slitpos without a reference: (bool; default: False). The full
name of this option for the EsoRex configuration file is
sinfoni.wavecal.slitpos_boostrap [default = False].
--wcal-calib_indicator <bool>
Calib Indicator: FALSE: if the dispersion relation is already known, the routine
can jump to the sinfo_waveMap section TRUE: if the dispersion relation must first
be determined (bool; default: True). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.calib_indicator [default = True].
--wcal-min_diff <float>
Minimum Of Difference: minimum difference of mean and sinfo_median column intensity
to carry out the cross sinfo_correlation (float; default: 1.0). The full name of
this option for the EsoRex configuration file is sinfoni.wavecal.min_diff [default
= 1.0].
--wcal-hw <long>
Half Width: half width of a box within which the line must be placed (long;
default: 7). The full name of this option for the EsoRex configuration file is
sinfoni.wavecal.half_width [default = 7].
--wcal-sigma <float>
Sigma: sigma of Gaussian which is convolved with the artificial spectrum generated
using the line list (float; default: 2.0). The full name of this option for the
EsoRex configuration file is sinfoni.wavecal.sigma [default = 2.0].
--wcal-fwhm <float>
FWHM: initial guess value for the fwhm of the Gaussian used for the line fit
(float; default: 2.83). The full name of this option for the EsoRex configuration
file is sinfoni.wavecal.fwhm [default = 2.83].
--wcal-min_amplitude <float>
Minimum Of Amplitude: of the Gaussian to do the fit (float; default: 5.0). The full
name of this option for the EsoRex configuration file is
sinfoni.wavecal.min_amplitude [default = 5.0].
--wcal-max_residual <float>
Maximum Residuals value: beyond this value the fit is rejected (float; default:
0.5). The full name of this option for the EsoRex configuration file is
sinfoni.wavecal.max_residual [default = 0.5].
--wcal-n_a_coeffs <long>
Number of A coefficients: number of polynomial coefficients for the dispersion
relation (long; default: 4). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.n_a_coefficients [default = 4].
--wcal-n_b_coeffs <long>
Number of B coefficients: number of polynomial coefficients for the polynomial fit
of the dispersion coefficients (long; default: 2). The full name of this option for
the EsoRex configuration file is sinfoni.wavecal.n_b_coefficients [default = 2].
--wcal-sigma_factor <float>
Sigma Factor: Factor of the standard deviation of the polynomial coefficients of
the dispersion relation beyond which the coefficients are not used for the fit
(float; default: 1.5). The full name of this option for the EsoRex configuration
file is sinfoni.wavecal.sigma_factor [default = 1.5].
--wcal-wcoeff_ind <bool>
Write Coefficients Index: indicates if the coefficients should be written into a
file or not (bool; default: True). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.write_coeffs_ind [default = True].
--wcal-par_ind <bool>
Write Parameter Index: indicates if the fit parameters should be written into a
file or not (bool; default: True). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.write_par_ind [default = True].
--wcal-pixel_dist <long>
Minimal Slitlets´s Distance in spectral direction (long; default: 15). The full
name of this option for the EsoRex configuration file is sinfoni.wavecal.pixel_dist
[default = 15].
--wcal-pixel_tol <float>
Pixel Tolerance: allowed pixel position tolerance between estimated and fitted line
position (float; default: 5.0). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.pixel_tol [default = 5.0].
--wcal-wave_map_ind <bool>
Wavelength Map Indicator: indicates if the wavelength calibration map should be
generated (TRUE) or not (FALSE) (bool; default: False). The full name of this
option for the EsoRex configuration file is sinfoni.wavecal.wave_map_ind [default =
False].
--wcal-mag_factor <long>
Magnificator Factor: magnifying factor for the number of pixels in the columns
needed for FFT (long; default: 8). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.mag_factor [default = 8].
--wcal-slit_pos_ind <bool>
Slit Position Indicator: indicates if the fits of the slitlet edge positions should
be carried through or not (bool; default: True). The full name of this option for
the EsoRex configuration file is sinfoni.wavecal.slit_pos_indicator [default =
True].
--wcal-fit_boltz_ind <bool>
Fit Boltzmann Indicator: indicates if the fits of the slitlet edge positions is
carried trough by using a Boltzmann function as model function (bool; default:
True). The full name of this option for the EsoRex configuration file is
sinfoni.wavecal.fit_boltz_indicator [default = True].
--wcal-fit_edge_ind <bool>
Fit Edge Indicator: indicates if the fits of the slitlet edge positions is carried
through by using a simple edge function as model function (bool; default: False).
The full name of this option for the EsoRex configuration file is
sinfoni.wavecal.fit_edge_indicator [default = False].
--wcal-estimate_ind <bool>
Estimate Indicator: indicates if the fits of the slitlet edge positions is carried
through by using a list of estimated guess positions in a file (TRUE)or if the
initial positions are calculated automatically (FALSE). The estimation case is more
stable (bool; default: False). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.estimate_indicator [default = False].
--wcal-box_len <long>
Box Length: pixel length of the row box within which the fit is carried out (long;
default: 32). The full name of this option for the EsoRex configuration file is
sinfoni.wavecal.box_length [default = 32].
--wcal-y_box <float>
Y Box: half width of a small box in spectral direction within which the maximal
intensity pixel is searched (float; default: 5.0). The full name of this option for
the EsoRex configuration file is sinfoni.wavecal.y_box [default = 5.0].
--wcal-diff_toll <float>
Difference Tolearance: maximal tolerable difference of the resulting fit positions
of the slitlet edges with respect to the expected positions (float; default: 2.0).
The full name of this option for the EsoRex configuration file is
sinfoni.wavecal.diff_tol [default = 2.0].
--wcal-qc_thresh_min <long>
qc_thresh_min (long; default: 0). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.qc_thresh_min [default = 0].
--wcal-qc_thresh_max <long>
qc_thresh_max (long; default: 49000). The full name of this option for the EsoRex
configuration file is sinfoni.wavecal.qc_thresh_max [default = 49000].
--wcal-no_coeffs <long>
number of coefficients for the polynomial interpolation (long; default: 3). The
full name of this option for the EsoRex configuration file is
sinfoni.wavecal.n_coeffs [default = 3].
Note that it is possible to create a configuration file containing these options, along
with suitable default values. Please refer to the details provided by the 'esorex --help'
command.
SEE ALSO
The full documentation for the sinfo pipeline can be downloaded as a PDF file using the
following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/sinfoni/sinfo-pipeline-manual-19.0.pdf
An overview over the existing ESO pipelines can be found on the web page
http://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
http://packages.python.org/python-cpl/index.html for further information.
The other recipes of the sinfo pipeline are sinfo_rec_detlin(7), sinfo_rec_distortion(7),
sinfo_rec_jitter(7), sinfo_rec_mdark(7), sinfo_rec_mflat(7), sinfo_rec_pupil(7),
sinfo_utl_bp_mask_add(7), sinfo_utl_cube2ima(7), sinfo_utl_cube2spectrum(7),
sinfo_utl_cube_arith(7), sinfo_utl_cube_combine(7), sinfo_utl_cube_create(7),
sinfo_utl_ima_arith(7), sinfo_utl_ima_line_corr(7), sinfo_utl_line_oh_select(7),
sinfo_utl_skycor(7), sinfo_utl_skymap(7), sinfo_utl_spectrum_divide_by_blackbody(7),
sinfo_utl_spectrum_wavelength_shift(7)
VERSION
sinfo_rec_wavecal 3.0.0
AUTHOR
Andrea Modigliani <Andrea.Modigliani@eso.org>
BUG REPORTS
Please report any problems to Andrea.Modigliani@eso.org. Alternatively, you may send a
report to the ESO User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the SINFONI Instrument Pipeline Copyright (C) 2002,2003 European
Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA