Provided by: pidentd_3.0.19.ds1-8_amd64 
NAME
identd - TCP/IP IDENT protocol server
SYNOPSIS
identd [options]
DESCRIPTION
Identd is a server which implements the TCP/IP proposed standard IDENT user identification
protocol as specified in the RFC 1413 document.
identd operates by looking up specific TCP/IP connections and returning the user name of
the process owning the connection. It can optionally return other information instead of
a user name.
OPTIONS
-h Display the available command line options.
-V Displays the version and OS version it was compiled for, and then exit.
-d Enables extra debugging messages.
-C<file> Directs identd to parse additional configuration options from the file
specified.
-i May be used when starting the daemon by inetd with the "nowait" option (see
below).
-w May be used when starting the daemon by inetd with the "wait" option (see
below).
-I May be used when the daemon is started by init (see below).
-b flag may be used to make the daemon run in standalone mode (see below).
-u<user> Used to specify a user number or name to which the server should switch to after
binding itself to the TCP/IP port and opening the kernel devices.
-g<group> Used to specify a group number or name which the server should switch to after
binding itself to the TCP/IP port and opening the kernel devices.
-p<port> Used to specify an alternative TCP port to bind to, if running as a standalone
daemon or started by init Can be specified by name or by number. Defaults to the
IDENT port (113).
-t<limit> Used to specify the request timeout limit. This is the maximum number of seconds
a server will allow a client connection to be active before terminating it. It
defaults to 120 seconds.
-P<pidfile>
Specify the location of a file to store the process number of the Identd daemon.
-K<nthreads>
Control the number of threads to use for kernel lookups
-L<facility>
Set the syslog facility to use instead of 'daemon'.
-o Directs identd to return OTHER instead of UNIX as the "operating system".
-E Enables DES encryption of the returned data (see below for more information).
-n Directs identd to always return user numbers instead of user names (for example
if you wish to keep the user names a secret).
-N Directs identd to check for a file ".noident" in each home directory for the
user which the daemon is about to return the user name for. If that file exists
then the daemon will give the error HIDDEN-USER instead of the normal USERID
response.
-e Enables certain non-standard protocol extensions. Currently defined extensions
include the requests VERSION to return the Ident daemon version and QUIT to
terminate a session (useful in conjunction with the -m option).
-m Enables identd to use a mode of operation that will allow multiple requests to
be processed per session. Each request is specified one per line and the
responses will be returned one per line. The connection will not be closed until
the connecting part closes it's end of the line.
INSTALLATION
The preferred way to start identd depends on how it was built.
If it was built with support for multithreading then it should be started either from init
, as a standalone daemon or from inetd using the "wait" mode (if your inetd supports it!)
If it was built without support for multithreading then it should be started from inetd
using the normal "nowait" mode for "stream tcp" services. (The main reason being that it
will be single-threaded, so it will only serve one client connection at a time).
identd normally will autodetect how it was invoked so there normally is no need to use the
four command line switches (-i, -w, -I, -b).
ENCRYPTION
DES encryption is only available if the daemon was built with support for it enabled.
An encryption key (1024 bytes long) should be stored in the key file ( /etc/identd.key )
and it should be generated using a cryptographically safe random generator in order to be
really safe. It should not contain any NUL (0x00) characters since this is used as a
string to generate the real binary DES key.
This file may contain multiple 1024 byte long keys, and the server will use the last key
stored in that file.
The returned token will contain the local and remote IP addresses and TCP port numbers,
the local user's uid number, a timestamp, a random number, and a checksum - all encrypted
using DES. The encrypted binary information is then encoded in a BASE64 string (32
characters long) and enclosed in square brackets to produce a token that is transmitted to
the remote client.
The encrypted token can later be decrypted by the idecrypt command. This program will
attempt to decrypt a token with all the keys stored in the key file until it succeeds (or
have tried all the keys).
CONFIGURATION FILE
The configuration file contains a list of option=value pairs.
syslog:facility = FACILITY
Set which facility to use when sending syslog messages. See syslog.conf(5) for
more information.
server:user = USER
Set what user (and group, from the passwd database) the daemon should run as
after it has opened all the kernel handles. (Default: nobody)
server:group = GROUP
Override the group id (as set by the server:user option).
server:port = PORT
Set what TCP/IP port the daemon should listen to. (Default: 113)
server:backlog = LIMIT
Set the size of the server listen() backlog limit.
server:pid-file = PATH
Set the path to the file where the server will store it's process id.
server:max-request = LIMIT
Max number of concurrent requests allowed. Default is 0 (zero) which means "no
limit".
protocol:extensions = ON/OFF
Enable/disable the nonstandard protocol extensions ( VERSION and QUIT
currently). Default: off
protocol:multiquery = ON/OFF
Enable/disable the multiple queries per connection feature. Default: off
protocol:timeout = SECONDS
Max number of seconds since connection or last request. If set to 0 (zero), no
timeout will be used. Default: 120 seconds.
kernel:threads = LIMIT
Max number of threads doing kernel lookups concurrently. Default: 8
kernel:buffers = LIMIT
Max number of queued kernel lookup requests. Default: 32
kernel:attempts = LIMIT
Max number of times to retry a kernel lookup in case of failure. Default: 5
result:uid-only = YES/NO
Disable uid->username lookups (only return uid numbers). Default: no
result:noident = ON/OFF
Enable/disable checking for the ".noident" file in users home directories.
result:charset = CHARSET
Define the character set returned in replies. Default: "US-ASCII"
result:opsys = OPSYS
Define the operating system returned in replies. Default: "UNIX"
result:syslog-level = LEVEL
If set to anything other than "none", all requested replies will be sent to the
syslog service with the specified severity level. See syslog.conf(5) for more
information. Default: none
result:encrypt = YES/NO
Enable encryption of replies. Only available if Identd was built with a DES
encryption library.
encrypt:key-file = PATH
Path to the file containing the encryption keys.
include = PATH
Include (and parse) the contents of another configuration file.
NOTES
The username (or UID) returned ought to be the login name. However it (probably, for most
architecture implementations) is the "real user ID" as stored with the process. Thus the
UID returned may be different from the login name for setuid programs (or those running as
root) which has done a setuid(3) call and their children. For example, it may (should?) be
wrong for an incoming ftpd ; and we are probably interested in the running shell, not the
telnetd for an incoming telnet session. (But of course identd returns info for outgoing
connections, not incoming ones.)
FILES
/etc/identd.conf
Contains the default configuration options for identd.
/etc/identd.key
If compiled with DES encryption enabled, the 1024 first bytes of this file is used
to specify the secret key for encrypting replies.
/var/run/identd/identd.pid
Contains (if enabled) the process number of the identd daemon.
AVAILABILITY
The daemon is free software. You can redistribute it and/or modify it as you wish - as
long as you don't claim that you wrote it.
The source code for the latest version of the daemon can always be FTP'd from one of the
following addresses:
Main site: ftp://ftp.lysator.liu.se/pub/ident/servers/
Mirror: ftp://ftp.uu.net/networking/ident/servers/
The author can be contacted at:
Email: Peter Eriksson <pen@lysator.liu.se>
SEE ALSO
idecrypt(8) , ikeygen(8) , inetd.conf(5) ,
8 Jan 1999 identd(8)