Ubuntu Manpage: stunnel - TLS offloading and load-balancing proxy

Provided by: stunnel4_5.44-1ubuntu3_amd64

NAME

       stunnel - TLS offloading and load-balancing proxy

SYNOPSIS

       Unix:
           stunnel [FILE] | -fd N | -help | -version | -sockets | -options

       WIN32:
           stunnel [ [ -install | -uninstall | -start | -stop |
               -reload | -reopen | -exit ] [-quiet] [FILE] ] |
               -help | -version | -sockets | -options

DESCRIPTION

       The stunnel program is designed to work as TLS encryption wrapper between remote clients
       and local (inetd-startable) or remote servers. The concept is that having non-TLS aware
       daemons running on your system you can easily set them up to communicate with clients over
       secure TLS channels.

       stunnel can be used to add TLS functionality to commonly used Inetd daemons like POP-2,
       POP-3, and IMAP servers, to standalone daemons like NNTP, SMTP and HTTP, and in tunneling
       PPP over network sockets without changes to the source code.

       This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)

OPTIONS

       FILE
           Use specified configuration file

       -fd N (Unix only)
           Read the config file from specified file descriptor

       -help
           Print stunnel help menu

       -version
           Print stunnel version and compile time defaults

       -sockets
           Print default socket options

       -options
           Print supported TLS options

       -install (Windows NT and later only)
           Install NT Service

       -uninstall (Windows NT and later only)
           Uninstall NT Service

       -start (Windows NT and later only)
           Start NT Service

       -stop (Windows NT and later only)
           Stop NT Service

       -reload (Windows NT and later only)
           Reload the configuration file of the running NT Service

       -reopen (Windows NT and later only)
           Reopen the log file of the running NT Service

       -exit (Win32 only)
           Exit an already started stunnel

       -quiet (Win32 only)
           Don't display any message boxes

CONFIGURATION FILE

Each line of the configuration file can be either:

• An empty line (ignored).

• A comment starting with ';' (ignored).

• An 'option_name = option_value' pair.

• '[service_name]' indicating a start of a service definition.

An address parameter of an option may be either:

• A port number.

• A colon-separated pair of IP address (either IPv4, IPv6, or domain name) and port
number.

• A Unix socket path (Unix only).

GLOBAL OPTIONS
chroot = DIRECTORY (Unix only)
directory to chroot stunnel process

chroot keeps stunnel in a chrooted jail. CApath, CRLpath, pid and exec are located
inside the jail and the patches have to be relative to the directory specified with
chroot.

Several functions of the operating system also need their files to be located within
the chroot jail, e.g.:

• Delayed resolver typically needs /etc/nsswitch.conf and /etc/resolv.conf.

• Local time in log files needs /etc/timezone.

• Some other functions may need devices, e.g. /dev/zero or /dev/null.

compression = deflate | zlib
select data compression algorithm

default: no compression

Deflate is the standard compression method as described in RFC 1951.

debug = [FACILITY.]LEVEL
debugging level

Level is one of the syslog level names or numbers emerg (0), alert (1), crit (2), err
(3), warning (4), notice (5), info (6), or debug (7). All logs for the specified
level and all levels numerically less than it will be shown. Use debug = debug or
debug = 7 for greatest debugging output. The default is notice (5).

The syslog facility 'daemon' will be used unless a facility name is supplied.
(Facilities are not supported on Win32.)

Case is ignored for both facilities and levels.

EGD = EGD_PATH (Unix only)
path to Entropy Gathering Daemon socket

Entropy Gathering Daemon socket to use to feed the OpenSSL random number generator.

engine = auto | ENGINE_ID
select hardware or software cryptographic engine

default: software-only cryptography

See Examples section for an engine configuration to use the certificate and the
corresponding private key from a cryptographic device.

engineCtrl = COMMAND[:PARAMETER]
control hardware engine

engineDefault = TASK_LIST
set OpenSSL tasks delegated to the current engine

The parameter specifies a comma-separated list of task to be delegated to the current
engine.

The following tasks may be available, if supported by the engine: ALL, RSA, DSA, ECDH,
ECDSA, DH, RAND, CIPHERS, DIGESTS, PKEY, PKEY_CRYPTO, PKEY_ASN1.

fips = yes | no
enable or disable FIPS 140-2 mode.

This option allows you to disable entering FIPS mode if stunnel was compiled with FIPS
140-2 support.

default: no (since version 5.00)

foreground = yes | quiet | no (Unix only)
foreground mode

Stay in foreground (don't fork).

With the yes parameter it also logs to stderr in addition to the destinations
specified with syslog and output.

default: background in daemon mode

iconActive = ICON_FILE (GUI only)
GUI icon to be displayed when there are established connections

On Windows platform the parameter should be an .ico file containing a 16x16 pixel
image.

iconError = ICON_FILE (GUI only)
GUI icon to be displayed when no valid configuration is loaded

On Windows platform the parameter should be an .ico file containing a 16x16 pixel
image.

iconIdle = ICON_FILE (GUI only)
GUI icon to be displayed when there are no established connections

On Windows platform the parameter should be an .ico file containing a 16x16 pixel
image.

log = append | overwrite
log file handling

This option allows you to choose whether the log file (specified with the output
option) is appended or overwritten when opened or re-opened.

default: append

output = FILE
append log messages to a file

/dev/stdout device can be used to send log messages to the standard output (for
example to log them with daemontools splogger).

pid = FILE (Unix only)
pid file location

If the argument is empty, then no pid file will be created.

pid path is relative to the chroot directory if specified.

RNDbytes = BYTES
bytes to read from random seed files

RNDfile = FILE
path to file with random seed data

The OpenSSL library will use data from this file first to seed the random number
generator.

RNDoverwrite = yes | no
overwrite the random seed files with new random data

default: yes

service = SERVICE (Unix only)
stunnel service name

The specified service name is used for syslog and as the inetd mode service name for
TCP Wrappers. While this option can technically be specified in the service sections,
it is only useful in global options.

default: stunnel

socket = a|l|r:OPTION=VALUE[:VALUE]
Set an option on the accept/local/remote socket

The values for the linger option are l_onof:l_linger. The values for the time are
tv_sec:tv_usec.

Examples:

socket = l:SO_LINGER=1:60
set one minute timeout for closing local socket
socket = r:SO_OOBINLINE=yes
place out-of-band data directly into the
receive data stream for remote sockets
socket = a:SO_REUSEADDR=no
disable address reuse (enabled by default)
socket = a:SO_BINDTODEVICE=lo
only accept connections on loopback interface

syslog = yes | no (Unix only)
enable logging via syslog

default: yes

taskbar = yes | no (WIN32 only)
enable the taskbar icon

default: yes

SERVICE-LEVEL OPTIONS
Each configuration section begins with a service name in square brackets. The service
name is used for libwrap (TCP Wrappers) access control and lets you distinguish stunnel
services in your log files.

Note that if you wish to run stunnel in inetd mode (where it is provided a network socket
by a server such as inetd, xinetd, or tcpserver) then you should read the section entitled
INETD MODE below.

accept = [HOST:]PORT
accept connections on specified address

If no host specified, defaults to all IPv4 addresses for the local host.

To listen on all IPv6 addresses use:

accept = :::PORT

CApath = DIRECTORY
Certificate Authority directory

This is the directory in which stunnel will look for certificates when using the
verifyChain or verifyPeer options. Note that the certificates in this directory
should be named XXXXXXXX.0 where XXXXXXXX is the hash value of the DER encoded subject
of the cert.

The hash algorithm has been changed in OpenSSL 1.0.0. It is required to c_rehash the
directory on upgrade from OpenSSL 0.x.x to OpenSSL 1.x.x.

CApath path is relative to the chroot directory if specified.

CAfile = CA_FILE
Certificate Authority file

This file contains multiple CA certificates, to be used with the verifyChain and
verifyPeer options.

cert = CERT_FILE
certificate chain file name

The parameter specifies the file containing certificates used by stunnel to
authenticate itself against the remote client or server. The file should contain the
whole certificate chain starting from the actual server/client certificate, and ending
with the self-signed root CA certificate. The file must be either in PEM or P12
format.

A certificate chain is required in server mode, and optional in client mode.

This parameter is also used as the certificate identifier when a hardware engine is
enabled.

checkEmail = EMAIL
email address of the peer certificate subject

Multiple checkEmail options are allowed in a single service section. Certificates are
accepted if no checkEmail option was specified, or the email address of the peer
certificate matches any of the email addresses specified with checkEmail.

This option requires OpenSSL 1.0.2 or later.

checkHost = HOST
host of the peer certificate subject

Multiple checkHost options are allowed in a single service section. Certificates are
accepted if no checkHost option was specified, or the host name of the peer
certificate matches any of the hosts specified with checkHost.

This option requires OpenSSL 1.0.2 or later.

checkIP = IP
IP address of the peer certificate subject

Multiple checkIP options are allowed in a single service section. Certificates are
accepted if no checkIP option was specified, or the IP address of the peer certificate
matches any of the IP addresses specified with checkIP.

This option requires OpenSSL 1.0.2 or later.

ciphers = CIPHER_LIST
Select permitted TLS ciphers

A colon-delimited list of the ciphers to allow in the TLS connection, for example
DES-CBC3-SHA:IDEA-CBC-MD5.

client = yes | no
client mode (remote service uses TLS)

default: no (server mode)

config = COMMAND[:PARAMETER]
OpenSSL configuration command

The OpenSSL configuration command is executed with the specified parameter. This
allows any configuration commands to be invoked from the stunnel configuration file.
Supported commands are described on the SSL_CONF_cmd(3ssl) manual page.

Several config lines can be used to specify multiple configuration commands.

This option requires OpenSSL 1.0.2 or later.

connect = [HOST:]PORT
connect to a remote address

If no host is specified, the host defaults to localhost.

Multiple connect options are allowed in a single service section.

If host resolves to multiple addresses and/or if multiple connect options are
specified, then the remote address is chosen using a round-robin algorithm.

CRLpath = DIRECTORY
Certificate Revocation Lists directory

This is the directory in which stunnel will look for CRLs when using the verifyChain
and verifyPeer options. Note that the CRLs in this directory should be named
XXXXXXXX.r0 where XXXXXXXX is the hash value of the CRL.

The hash algorithm has been changed in OpenSSL 1.0.0. It is required to c_rehash the
directory on upgrade from OpenSSL 0.x.x to OpenSSL 1.x.x.

CRLpath path is relative to the chroot directory if specified.

CRLfile = CRL_FILE
Certificate Revocation Lists file

This file contains multiple CRLs, used with the verifyChain and verifyPeer options.

curve = NID
specify ECDH curve name

To get a list of supported curves use:

openssl ecparam -list_curves

default: prime256v1

logId = TYPE
connection identifier type

This identifier allows you to distinguish log entries generated for each of the
connections.

Currently supported types:

sequential
The numeric sequential identifier is only unique within a single instance of
stunnel, but very compact. It is most useful for manual log analysis.

unique
This alphanumeric identifier is globally unique, but longer than the sequential
number. It is most useful for automated log analysis.

thread
The operating system thread identifier is neither unique (even within a single
instance of stunnel) nor short. It is most useful for debugging software or
configuration issues.

process
The operating system process identifier (PID) may be useful in the inetd mode.

default: sequential

debug = LEVEL
debugging level

Level is a one of the syslog level names or numbers emerg (0), alert (1), crit (2),
err (3), warning (4), notice (5), info (6), or debug (7). All logs for the specified
level and all levels numerically less than it will be shown. Use debug = debug or
debug = 7 for greatest debugging output. The default is notice (5).

delay = yes | no
delay DNS lookup for the connect option

This option is useful for dynamic DNS, or when DNS is not available during stunnel
startup (road warrior VPN, dial-up configurations).

Delayed resolver mode is automatically engaged when stunnel fails to resolve on
startup any of the connect targets for a service.

Delayed resolver inflicts failover = prio.

default: no

engineId = ENGINE_ID
select engine ID for the service

engineNum = ENGINE_NUMBER
select engine number for the service

The engines are numbered starting from 1.

exec = EXECUTABLE_PATH
execute a local inetd-type program

exec path is relative to the chroot directory if specified.

The following environmental variables are set on Unix platforms: REMOTE_HOST,
REMOTE_PORT, SSL_CLIENT_DN, SSL_CLIENT_I_DN.

execArgs = $0 $1 $2 ...
arguments for exec including the program name ($0)

Quoting is currently not supported. Arguments are separated with an arbitrary amount
of whitespace.

failover = rr | prio
Failover strategy for multiple "connect" targets.

rr round robin - fair load distribution

prio
priority - use the order specified in config file

default: rr

ident = USERNAME
use IDENT (RFC 1413) username checking

include = DIRECTORY
include all configuration file parts located in DIRECTORY

The files are included in the ascending alphabetical order of their names.

key = KEY_FILE
private key for the certificate specified with cert option

A private key is needed to authenticate the certificate owner. Since this file should
be kept secret it should only be readable by its owner. On Unix systems you can use
the following command:

chmod 600 keyfile

This parameter is also used as the private key identifier when a hardware engine is
enabled.

default: the value of the cert option

libwrap = yes | no
Enable or disable the use of /etc/hosts.allow and /etc/hosts.deny.

default: no (since version 5.00)

local = HOST
By default, the IP address of the outgoing interface is used as the source for remote
connections. Use this option to bind a static local IP address instead.

OCSP = URL
select OCSP responder for certificate verification

OCSPaia = yes | no
validate certificates with their AIA OCSP responders

This option enables stunnel to validate certificates with the list of OCSP responder
URLs retrieved from their AIA (Authority Information Access) extension.

OCSPflag = OCSP_FLAG
specify OCSP responder flag

Several OCSPflag can be used to specify multiple flags.

currently supported flags: NOCERTS, NOINTERN, NOSIGS, NOCHAIN, NOVERIFY, NOEXPLICIT,
NOCASIGN, NODELEGATED, NOCHECKS, TRUSTOTHER, RESPID_KEY, NOTIME

OCSPnonce = yes | no
send and verify the OCSP nonce extension

This option protects the OCSP protocol against replay attacks. Due to its
computational overhead, the nonce extension is usually only supported on internal
(e.g. corporate) responders, and not on public OCSP responders.

options = SSL_OPTIONS
OpenSSL library options

The parameter is the OpenSSL option name as described in the SSL_CTX_set_options(3ssl)
manual, but without SSL_OP_ prefix. stunnel -options lists the options found to be
allowed in the current combination of stunnel and the OpenSSL library used to build
it.

Several option lines can be used to specify multiple options. An option name can be
prepended with a dash ("-") to disable the option.

For example, for compatibility with the erroneous Eudora TLS implementation, the
following option can be used:

options = DONT_INSERT_EMPTY_FRAGMENTS

default:

options = NO_SSLv2
options = NO_SSLv3

protocol = PROTO
application protocol to negotiate TLS

This option enables initial, protocol-specific negotiation of the TLS encryption. The
protocol option should not be used with TLS encryption on a separate port.

Currently supported protocols:

cifs
Proprietary (undocummented) extension of CIFS protocol implemented in Samba.
Support for this extension was dropped in Samba 3.0.0.

connect
Based on RFC 2817 - Upgrading to TLS Within HTTP/1.1, section 5.2 - Requesting a
Tunnel with CONNECT

This protocol is only supported in client mode.

imap
Based on RFC 2595 - Using TLS with IMAP, POP3 and ACAP

nntp
Based on RFC 4642 - Using Transport Layer Security (TLS) with Network News
Transfer Protocol (NNTP)

This protocol is only supported in client mode.

pgsql
Based on http://www.postgresql.org/docs/8.3/static/protocol-flow.html#AEN73982

pop3
Based on RFC 2449 - POP3 Extension Mechanism

proxy
Haproxy client IP address
http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt

smtp
Based on RFC 2487 - SMTP Service Extension for Secure SMTP over TLS

socks
SOCKS versions 4, 4a, and 5 are supported. The SOCKS protocol itself is
encapsulated within TLS encryption layer to protect the final destination address.

http://www.openssh.com/txt/socks4.protocol

http://www.openssh.com/txt/socks4a.protocol

The BIND command of the SOCKS protocol is not supported. The USERID parameter is
ignored.

See Examples section for sample configuration files for VPN based on SOCKS
encryption.

protocolAuthentication = AUTHENTICATION
authentication type for the protocol negotiations

Currently, this option is only supported in the client-side 'connect' and 'smtp'
protocols.

Supported authentication types for the 'connect' protocol are 'basic' or 'ntlm'. The
default 'connect' authentication type is 'basic'.

Supported authentication types for the 'smtp' protocol are 'plain' or 'login'. The
default 'smtp' authentication type is 'plain'.

protocolDomain = DOMAIN
domain for the protocol negotiations

Currently, this option is only supported in the client-side 'connect' protocol.

protocolHost = HOST:PORT
destination address for the protocol negotiations

protocolHost specifies the final TLS server to be connected to by the proxy, and not
the proxy server directly connected by stunnel. The proxy server should be specified
with the 'connect' option.

Currently the protocol destination address only applies to the 'connect' protocol.

protocolPassword = PASSWORD
password for the protocol negotiations

Currently, this option is only supported in the client-side 'connect' and 'smtp'
protocols.

protocolUsername = USERNAME
username for the protocol negotiations

Currently, this option is only supported in the client-side 'connect' and 'smtp'
protocols.

PSKidentity = IDENTITY
PSK identity for the PSK client

PSKidentity can be used on stunnel clients to select the PSK identity used for
authentication. This option is ignored in server sections.

default: the first identity specified in the PSKsecrets file.

PSKsecrets = FILE
file with PSK identities and corresponding keys

Each line of the file in the following format:

IDENTITY:KEY

The key is required to be at least 20 characters long. The file should not be world-
readable nor world-writable.

pty = yes | no (Unix only)
allocate a pseudoterminal for 'exec' option

redirect = [HOST:]PORT
redirect TLS client connections on certificate-based authentication failures

This option only works in server mode. Some protocol negotiations are also
incompatible with the redirect option.

renegotiation = yes | no
support TLS renegotiation

Applications of the TLS renegotiation include some authentication scenarios, or re-
keying long lasting connections.

On the other hand this feature can facilitate a trivial CPU-exhaustion DoS attack:

http://vincent.bernat.im/en/blog/2011-ssl-dos-mitigation.html

Please note that disabling TLS renegotiation does not fully mitigate this issue.

default: yes (if supported by OpenSSL)

reset = yes | no
attempt to use the TCP RST flag to indicate an error

This option is not supported on some platforms.

default: yes

retry = yes | no
reconnect a connect+exec section after it was disconnected

default: no

requireCert = yes | no
require a client certificate for verifyChain or verifyPeer

With requireCert set to no, the stunnel server accepts client connections that did not
present a certificate.

Both verifyChain = yes and verifyPeer = yes imply requireCert = yes.

default: no

setgid = GROUP (Unix only)
Unix group id

As a global option: setgid() to the specified group in daemon mode and clear all other
groups.

As a service-level option: set the group of the Unix socket specified with "accept".

setuid = USER (Unix only)
Unix user id

As a global option: setuid() to the specified user in daemon mode.

As a service-level option: set the owner of the Unix socket specified with "accept".

sessionCacheSize = NUM_ENTRIES
session cache size

sessionCacheSize specifies the maximum number of the internal session cache entries.

The value of 0 can be used for unlimited size. It is not recommended for production
use due to the risk of a memory exhaustion DoS attack.

sessionCacheTimeout = TIMEOUT
session cache timeout

This is the number of seconds to keep cached TLS sessions.

sessiond = HOST:PORT
address of sessiond TLS cache server

sni = SERVICE_NAME:SERVER_NAME_PATTERN (server mode)
Use the service as a slave service (a name-based virtual server) for Server Name
Indication TLS extension (RFC 3546).

SERVICE_NAME specifies the master service that accepts client connections with the
accept option. SERVER_NAME_PATTERN specifies the host name to be redirected. The
pattern may start with the '*' character, e.g. '*.example.com'. Multiple slave
services are normally specified for a single master service. The sni option can also
be specified more than once within a single slave service.

This service, as well as the master service, may not be configured in client mode.

The connect option of the slave service is ignored when the protocol option is
specified, as protocol connects to the remote host before TLS handshake.

Libwrap checks (Unix only) are performed twice: with the master service name after TCP
connection is accepted, and with the slave service name during the TLS handshake.

The sni option is only available when compiled with OpenSSL 1.0.0 and later.

sni = SERVER_NAME (client mode)
Use the parameter as the value of TLS Server Name Indication (RFC 3546) extension.

Empty SERVER_NAME disables sending the SNI extension.

The sni option is only available when compiled with OpenSSL 1.0.0 and later.

sslVersion = SSL_VERSION
select the TLS protocol version

Supported values: all, SSLv2, SSLv3, TLSv1, TLSv1.1, TLSv1.2

Availability of specific protocols depends on the linked OpenSSL library. Older
versions of OpenSSL do not support TLSv1.1 and TLSv1.2. Newer versions of OpenSSL do
not support SSLv2.

Obsolete SSLv2 and SSLv3 are currently disabled by default. See the options option
documentation for details.

stack = BYTES (except for FORK model)
thread stack size

TIMEOUTbusy = SECONDS
time to wait for expected data

TIMEOUTclose = SECONDS
time to wait for close_notify (set to 0 for buggy MSIE)

TIMEOUTconnect = SECONDS
time to wait to connect to a remote host

TIMEOUTidle = SECONDS
time to keep an idle connection

transparent = none | source | destination | both (Unix only)
enable transparent proxy support on selected platforms

Supported values:

none
Disable transparent proxy support. This is the default.

source
Re-write the address to appear as if a wrapped daemon is connecting from the TLS
client machine instead of the machine running stunnel.

This option is currently available in:

Remote mode (connect option) on Linux >=2.6.28
This configuration requires stunnel to be executed as root and without the
setuid option.

This configuration requires the following setup for iptables and routing
(possibly in /etc/rc.local or equivalent file):

iptables -t mangle -N DIVERT
iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT
iptables -t mangle -A DIVERT -j MARK --set-mark 1
iptables -t mangle -A DIVERT -j ACCEPT
ip rule add fwmark 1 lookup 100
ip route add local 0.0.0.0/0 dev lo table 100
echo 0 >/proc/sys/net/ipv4/conf/lo/rp_filter

stunnel must also to be executed as root and without the setuid option.

Remote mode (connect option) on Linux 2.2.x
This configuration requires the kernel to be compiled with the transparent
proxy option. Connected service must be installed on a separate host.
Routing towards the clients has to go through the stunnel box.

stunnel must also to be executed as root and without the setuid option.

Remote mode (connect option) on FreeBSD >=8.0
This configuration requires additional firewall and routing setup. stunnel
must also to be executed as root and without the setuid option.

Local mode (exec option)
This configuration works by pre-loading the libstunnel.so shared library.
_RLD_LIST environment variable is used on Tru64, and LD_PRELOAD variable on
other platforms.

destination
The original destination is used instead of the connect option.

A service section for transparent destination may look like this:

[transparent]
client = yes
accept = <stunnel_port>
transparent = destination

This configuration requires iptables setup to work, possibly in /etc/rc.local or
equivalent file.

For a connect target installed on the same host:

/sbin/iptables -t nat -I OUTPUT -p tcp --dport <redirected_port> \
-m ! --uid-owner <stunnel_user_id> \
-j DNAT --to-destination <local_ip>:<stunnel_port>

For a connect target installed on a remote host:

/sbin/iptables -I INPUT -i eth0 -p tcp --dport <stunnel_port> -j ACCEPT
/sbin/iptables -t nat -I PREROUTING -p tcp --dport <redirected_port> \
-i eth0 -j DNAT --to-destination <local_ip>:<stunnel_port>

The transparent destination option is currently only supported on Linux.

both
Use both source and destination transparent proxy.

Two legacy options are also supported for backward compatibility:

yes This option has been renamed to source.

no This option has been renamed to none.

verify = LEVEL
verify the peer certificate

This option is obsolete and should be replaced with the verifyChain and verifyPeer
options.

level 0
Request and ignore the peer certificate.

level 1
Verify the peer certificate if present.

level 2
Verify the peer certificate.

level 3
Verify the peer against a locally installed certificate.

level 4
Ignore the chain and only verify the peer certificate.

default
No verify.

verifyChain = yes | no
verify the peer certificate chain starting from the root CA

For server certificate verification it is essential to also require a specific
certificate with checkHost or checkIP.

The self-signed root CA certificate needs to be stored either in the file specified
with CAfile, or in the directory specified with CApath.

default: no

verifyPeer = yes | no
verify the peer certificate

The peer certificate needs to be stored either in the file specified with CAfile, or
in the directory specified with CApath.

default: no

RETURN VALUE

       stunnel returns zero on success, non-zero on error.

SIGNALS

       The following signals can be used to control stunnel in Unix environment:

       SIGHUP
           Force a reload of the configuration file.

           Some global options will not be reloaded:

           •   chroot

           •   foreground

           •   pid

           •   setgid

           •   setuid

           The use of the 'setuid' option will also prevent stunnel from binding to privileged
           (<1024) ports during configuration reloading.

           When the 'chroot' option is used, stunnel will look for all its files (including the
           configuration file, certificates, the log file and the pid file) within the chroot
           jail.

       SIGUSR1
           Close and reopen the stunnel log file.  This function can be used for log rotation.

       SIGTERM, SIGQUIT, SIGINT
           Shut stunnel down.

       The result of sending any other signals to the server is undefined.

EXAMPLES

       In order to provide TLS encapsulation to your local imapd service, use:

           [imapd]
           accept = 993
           exec = /usr/sbin/imapd
           execArgs = imapd

       or in remote mode:

           [imapd]
           accept = 993
           connect = 143

       In order to let your local e-mail client connect to a TLS-enabled imapd service on another
       server, configure the e-mail client to connect to localhost on port 119 and use:

           [imap]
           client = yes
           accept = 143
           connect = servername:993

       If you want to provide tunneling to your pppd daemon on port 2020, use something like:

           [vpn]
           accept = 2020
           exec = /usr/sbin/pppd
           execArgs = pppd local
           pty = yes

       If you want to use stunnel in inetd mode to launch your imapd process, you'd use this
       stunnel.conf.  Note there must be no [service_name] section.

           exec = /usr/sbin/imapd
           execArgs = imapd

       To setup SOCKS VPN configure the following client service:

           [socks_client]
           client = yes
           accept = 127.0.0.1:1080
           connect = vpn_server:9080
           verifyPeer = yes
           CAfile = stunnel.pem

       The corresponding configuration on the vpn_server host:

           [socks_server]
           protocol = socks
           accept = 9080
           cert = stunnel.pem
           key = stunnel.key

       Now test your configuration on the client machine with:

           curl --socks4a localhost http://www.example.com/

       An example server mode SNI configuration:

           [virtual]
           ; master service
           accept = 443
           cert =  default.pem
           connect = default.internal.mydomain.com:8080

           [sni1]
           ; slave service 1
           sni = virtual:server1.mydomain.com
           cert = server1.pem
           connect = server1.internal.mydomain.com:8081

           [sni2]
           ; slave service 2
           sni = virtual:server2.mydomain.com
           cert = server2.pem
           connect = server2.internal.mydomain.com:8082
           verifyPeer = yes
           CAfile = server2-allowed-clients.pem

       An example of advanced engine configuration allows for authentication with private keys
       stored in the Windows certificate store (Windows only).  With the CAPI engine you don't
       need to manually select the client key to use.  The client key is automatically selected
       based on the list of CAs trusted by the server.

           engine = capi

           [service]
           engineId = capi
           client = yes
           accept = 127.0.0.1:8080
           connect = example.com:8443

       An example of advanced engine configuration to use the certificate and the corresponding
       private key from a pkcs11 engine:

           engine = pkcs11
           engineCtrl = MODULE_PATH:opensc-pkcs11.so
           engineCtrl = PIN:123456

           [service]
           engineId = pkcs11
           client = yes
           accept = 127.0.0.1:8080
           connect = example.com:843
           cert = pkcs11:token=MyToken;object=MyCert
           key = pkcs11:token=MyToken;object=MyKey

       An example of advanced engine configuration to use the certificate and the corresponding
       private key from a SoftHSM token:

           engine = pkcs11
           engineCtrl = MODULE_PATH:softhsm2.dll
           engineCtrl = PIN:12345

           [service]
           engineId = pkcs11
           client = yes
           accept = 127.0.0.1:8080
           connect = example.com:843
           cert = pkcs11:token=MyToken;object=KeyCert

NOTES

RESTRICTIONS
stunnel cannot be used for the FTP daemon because of the nature of the FTP protocol which
utilizes multiple ports for data transfers. There are available TLS-enabled versions of
FTP and telnet daemons, however.

INETD MODE
The most common use of stunnel is to listen on a network port and establish communication
with either a new port via the connect option, or a new program via the exec option.
However there is a special case when you wish to have some other program accept incoming
connections and launch stunnel, for example with inetd, xinetd, or tcpserver.

For example, if you have the following line in inetd.conf:

imaps stream tcp nowait root /usr/bin/stunnel stunnel /etc/stunnel/imaps.conf

In these cases, the inetd-style program is responsible for binding a network socket (imaps
above) and handing it to stunnel when a connection is received. Thus you do not want
stunnel to have any accept option. All the Service Level Options should be placed in the
global options section, and no [service_name] section will be present. See the EXAMPLES
section for example configurations.

CERTIFICATES
Each TLS-enabled daemon needs to present a valid X.509 certificate to the peer. It also
needs a private key to decrypt the incoming data. The easiest way to obtain a certificate
and a key is to generate them with the free OpenSSL package. You can find more information
on certificates generation on pages listed below.

The order of contents of the .pem file is important. It should contain the unencrypted
private key first, then a signed certificate (not certificate request). There should also
be empty lines after the certificate and the private key. Any plaintext certificate
information appended on the top of generated certificate should be discarded. So the file
should look like this:

-----BEGIN RSA PRIVATE KEY-----
[encoded key]
-----END RSA PRIVATE KEY-----
[empty line]
-----BEGIN CERTIFICATE-----
[encoded certificate]
-----END CERTIFICATE-----
[empty line]

RANDOMNESS
stunnel needs to seed the PRNG (pseudo-random number generator) in order for TLS to use
good randomness. The following sources are loaded in order until sufficient random data
has been gathered:

• The file specified with the RNDfile flag.

• The file specified by the RANDFILE environment variable, if set.

• The file .rnd in your home directory, if RANDFILE not set.

• The file specified with '--with-random' at compile time.

• The contents of the screen if running on Windows.

• The egd socket specified with the EGD flag.

• The egd socket specified with '--with-egd-sock' at compile time.

• The /dev/urandom device.

Note that on Windows machines that do not have console user interaction (mouse movements,
creating windows, etc.) the screen contents are not variable enough to be sufficient, and
you should provide a random file for use with the RNDfile flag.

Note that the file specified with the RNDfile flag should contain random data -- that
means it should contain different information each time stunnel is run. This is handled
automatically unless the RNDoverwrite flag is used. If you wish to update this file
manually, the openssl rand command in recent versions of OpenSSL, would be useful.

Important note: If /dev/urandom is available, OpenSSL often seeds the PRNG with it while
checking the random state. On systems with /dev/urandom OpenSSL is likely to use it even
though it is listed at the very bottom of the list above. This is the behaviour of
OpenSSL and not stunnel.

DH PARAMETERS
stunnel 4.40 and later contains hardcoded 2048-bit DH parameters. Starting with stunnel
5.18, these hardcoded DH parameters are replaced every 24 hours with autogenerated
temporary DH parameters. DH parameter generation may take several minutes.

Alternatively, it is possible to specify static DH parameters in the certificate file,
which disables generating temporary DH parameters:

openssl dhparam 2048 >> stunnel.pem

FILES

       @sysconfdir@/stunnel/stunnel.conf
           stunnel configuration file

BUGS

       The execArgs option and the Win32 command line do not support quoting.

AUTHOR

       Michał Trojnara
           <Michal.Trojnara@stunnel.org>

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

CONFIGURATION FILE

RETURN VALUE

SIGNALS

EXAMPLES

NOTES

FILES

BUGS

SEE ALSO

AUTHOR