Provided by: dpkg_1.19.0.5ubuntu2.4_amd64 
NAME
dpkg-query - a tool to query the dpkg database
SYNOPSIS
dpkg-query [option...] command
DESCRIPTION
dpkg-query is a tool to show information about packages listed in the dpkg database.
COMMANDS
-l, --list [package-name-pattern...]
List packages matching given pattern. If no package-name-pattern is given, list all
packages in /var/lib/dpkg/status, excluding the ones marked as not-installed (i.e.
those which have been previously purged). Normal shell wildcard characters are
allowed in package-name-pattern. Please note you will probably have to quote
package-name-pattern to prevent the shell from performing filename expansion. For
example this will list all package names starting with “libc6”:
dpkg-query -l 'libc6*'
The first three columns of the output show the desired action, the package status,
and errors, in that order.
Desired action:
u = Unknown
i = Install
h = Hold
r = Remove
p = Purge
Package status:
n = Not-installed
c = Config-files
H = Half-installed
U = Unpacked
F = Half-configured
W = Triggers-awaiting
t = Triggers-pending
i = Installed
Error flags:
<empty> = (none)
R = Reinst-required
An uppercase status or error letter indicates the package is likely to cause severe
problems. Please refer to dpkg(1) for information about the above states and flags.
The output format of this option is not configurable, but varies automatically to
fit the terminal width. It is intended for human readers, and is not easily
machine-readable. See -W (--show) and --showformat for a way to configure the
output format.
-W, --show [package-name-pattern...]
Just like the --list option this will list all packages matching the given pattern.
However the output can be customized using the --showformat option. The default
output format gives one line per matching package, each line having the name
(extended with the architecture qualifier for Multi-Arch same packages) and
installed version of the package, separated by a tab.
-s, --status package-name...
Report status of specified package. This just displays the entry in the installed
package status database. When multiple package-name are listed, the requested
status entries are separated by an empty line, with the same order as specified on
the argument list.
-L, --listfiles package-name...
List files installed to your system from package-name. When multiple package-name
are listed, the requested lists of files are separated by an empty line, with the
same order as specified on the argument list. However, note that files created by
package-specific installation-scripts are not listed.
--control-list package-name
List control files installed to your system from package-name (since dpkg 1.16.5).
These can be used as input arguments to --control-show.
--control-show package-name control-file
Print the control-file installed to your system from package-name to the standard
output (since dpkg 1.16.5).
-c, --control-path package-name [control-file]
List paths for control files installed to your system from package-name (since dpkg
1.15.4). If control-file is specified then only list the path for that control
file if it is present.
Warning: this command is deprecated as it gives direct access to the internal dpkg
database, please switch to use --control-list and --control-show instead for all
cases where those commands might give the same end result. Although, as long as
there is still at least one case where this command is needed (i.e. when having to
remove a damaging postrm maintainer script), and while there is no good solution
for that, this command will not get removed.
-S, --search filename-search-pattern...
Search for packages that own files corresponding to the given pattern. Standard
shell wildcard characters can be used in the pattern, where asterisk (*) and
question mark (?) will match a slash, and blackslash (\) will be used as an escape
character.
If the first character in the filename-search-pattern is none of ‘*[?/’ then it
will be considered a substring match and will be implicitly surrounded by ‘*’ (as
in *filename-search-pattern*). If the subsequent string contains any of ‘*[?\’,
then it will handled like a glob pattern, otherwise any trailing ‘/’ or ‘/.’ will
be removed and a literal path lookup will be performed.
This command will not list extra files created by maintainer scripts, nor will it
list alternatives.
-p, --print-avail package-name...
Display details about package-name, as found in /var/lib/dpkg/available. When
multiple package-name are listed, the requested available entries are separated by
an empty line, with the same order as specified on the argument list.
Users of APT-based frontends should use apt-cache show package-name instead as the
available file is only kept up-to-date when using dselect.
-?, --help
Show the usage message and exit.
--version
Show the version and exit.
OPTIONS
--admindir=dir
Change the location of the dpkg database. The default location is /var/lib/dpkg.
--load-avail
Also load the available file when using the --show and --list commands, which now
default to only querying the status file (since dpkg 1.16.2).
-f, --showformat=format
This option is used to specify the format of the output --show will produce. The
format is a string that will be output for each package listed.
In the format string, “\” introduces escapes:
\n newline
\r carriage return
\t tab
“\” before any other character suppresses any special meaning of the following
character, which is useful for “\” and “$”.
Package information can be included by inserting variable references to package
fields using the syntax “${field[;width]}”. Fields are printed right-aligned unless
the width is negative in which case left alignment will be used. The following
fields are recognized but they are not necessarily available in the status file
(only internal fields or fields stored in the binary package end up in it):
Architecture
Bugs
Conffiles (internal)
Config-Version (internal)
Conflicts
Breaks
Depends
Description
Enhances
Essential
Filename (internal, front-end related)
Homepage
Installed-Size
MD5sum (internal, front-end related)
MSDOS-Filename (internal, front-end related)
Maintainer
Origin
Package
Pre-Depends
Priority
Provides
Recommends
Replaces
Revision (obsolete)
Section
Size (internal, front-end related)
Source
Status (internal)
Suggests
Tag (usually not in .deb but in repository Packages files)
Triggers-Awaited (internal)
Triggers-Pending (internal)
Version
The following are virtual fields, generated by dpkg-query from values from other
fields (note that these do not use valid names for fields in control files):
binary:Package
It contains the binary package name with a possible architecture qualifier
like “libc6:amd64” (since dpkg 1.16.2). An architecture qualifier will be
present to make the package name unambiguous, for example if the package has
a Multi-Arch field with a value of same or the package is of a foreign
architecture.
binary:Summary
It contains the package short description (since dpkg 1.16.2).
db:Status-Abbrev
It contains the abbreviated package status (as three characters), such as
“ii ” or “iHR” (since dpkg 1.16.2). See the --list command description for
more details.
db:Status-Want
It contains the package wanted status, part of the Status field (since dpkg
1.17.11).
db:Status-Status
It contains the package status word, part of the Status field (since dpkg
1.17.11).
db:Status-Eflag
It contains the package status error flag, part of the Status field (since
dpkg 1.17.11).
source:Package
It contains the source package name for this binary package (since dpkg
1.16.2).
source:Version
It contains the source package version for this binary package (since dpkg
1.16.2)
source:Upstream-Version
It contains the source package upstream version for this binary package
(since dpkg 1.18.16)
The default format string is “${binary:Package}\t${Version}\n”. Actually, all
other fields found in the status file (i.e. user defined fields) can be requested,
too. They will be printed as-is, though, no conversion nor error checking is done
on them. To get the name of the dpkg maintainer and the installed version, you
could run:
dpkg-query -W -f='${binary:Package} ${Version}\t${Maintainer}\n' dpkg
EXIT STATUS
0 The requested query was successfully performed.
1 The requested query failed either fully or partially, due to no file or package
being found (except for --control-path, --control-list and --control-show were such
errors are fatal).
2 Fatal or unrecoverable error due to invalid command-line usage, or interactions
with the system, such as accesses to the database, memory allocations, etc.
ENVIRONMENT
DPKG_ADMINDIR
If set and the --admindir option has not been specified, it will be used as the
dpkg data directory.
COLUMNS
This setting influences the output of the --list option by changing the width of
its output.
SEE ALSO
dpkg(1).