NAME

       gigdump - List information about a Gigasampler (.gig) file.

SYNOPSIS

       gigdump [OPTIONS] GIGFILE

DESCRIPTION

       By  default  it  prints out a list of all available samples, real-time instrument scripts and instruments
       within a Gigasampler (.gig) file, along with detailed information about their properties and settings.

OPTIONS

        GIGFILE
              filename of the Gigasampler file

        --rebuild-checksums
              Rebuild checksum table for all samples. Read description of   --verify  option  for  more  details
              about  sample  checksums in general. Usually you only need to use  --rebuild-checksums in case the
              samples' CRC checksum table itself was damaged. The  --verify option will  tell  you  if  that  is
              really  the  case  and will suggest to you to use  --rebuild-checksums to repair the table in such
              cases. If only individual samples were damaged, you  rather  might  want  to  replace  only  those
              damaged  samples  with gigedit(1) for example. Read description of  --verify for reasons to do so.
              When using  --rebuild-checksums all checksums of all samples will be regenerated. Hence you should
              manually check all samples once after using this option.  That  is  by  using  your  ears,  or  by
              exporting  the samples, but not by using the  --verify option. Because the latter cannot identifiy
              damaged samples that have been damaged before the entire checksum table had been regenerated.

        -v    Print version and exit.

        --verify
              Check raw wave data integrity of all samples and print result of this check.  For all samples of a
              gig file a correspondig CRC32 checksum is stored along to  its  raw  wave  form  data  whenever  a
              conscious  change  to  the  wave  form data was performed. By calling gigdump with this option all
              samples are scanned and compared with their existing checksums to detect any damage to  individual
              samples.  The individual damaged samples are listed by gigdump in this case. Since essentially the
              entire file has to be read, this can take a long time and hence  this  check  is  not  by  default
              performed  i.e.   each  time a gig file is loaded for regular use for example. Accordingly you may
              use  --verify from time to time to check explicitly whether your gig files have been  damaged  for
              some reason, i.e. after modifying them with an instrument editor like gigedit(1).  In case damaged
              samples  were  found,  you may replace those damaged samples with gigedit(1).  By doing this, only
              the replaced samples' checksums will be updated. All other checksums remain untouched. That's  why
              this approach is recommended over using  --rebuild-checksums in such cases.

SEE ALSO

       gigextract(1), gigmerge(1), gig2mono(1), gig2stereo(1), dlsdump(1), rifftree(1), akaidump(1), sf2dump(1),
       korgdump(1)

BUGS

       Check and report bugs at http://bugs.linuxsampler.org

Author

       Application and manual page written by Christian Schoenebeck <cuse@users.sf.net>

libgig 4.1.0                                       21 Sep 2016                                        gigdump(1)