Provided by: libguestfs0_1.36.13-1ubuntu3.3_amd64 
NAME
guestfs-internals - architecture and internals of libguestfs
DESCRIPTION
This manual page is for hackers who want to understand how libguestfs works internally.
This is just a description of how libguestfs works now, and it may change at any time in
the future.
ARCHITECTURE
Internally, libguestfs is implemented by running an appliance (a special type of small
virtual machine) using qemu(1). Qemu runs as a child process of the main program.
┌───────────────────┐
│ main program │
│ │
│ │ child process / appliance
│ │ ┌──────────────────────────┐
│ │ │ qemu │
├───────────────────┤ RPC │ ┌─────────────────┐ │
│ libguestfs ◀╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍▶ guestfsd │ │
│ │ │ ├─────────────────┤ │
└───────────────────┘ │ │ Linux kernel │ │
│ └────────┬────────┘ │
└───────────────│──────────┘
│
│ virtio-scsi
┌──────┴──────┐
│ Device or │
│ disk image │
└─────────────┘
The library, linked to the main program, creates the child process and hence the appliance
in the "guestfs_launch" in guestfs(3) function.
Inside the appliance is a Linux kernel and a complete stack of userspace tools (such as
LVM and ext2 programs) and a small controlling daemon called "guestfsd". The library
talks to "guestfsd" using remote procedure calls (RPC). There is a mostly one-to-one
correspondence between libguestfs API calls and RPC calls to the daemon. Lastly the disk
image(s) are attached to the qemu process which translates device access by the
appliance's Linux kernel into accesses to the image.
A common misunderstanding is that the appliance "is" the virtual machine. Although the
disk image you are attached to might also be used by some virtual machine, libguestfs
doesn't know or care about this. (But you will care if both libguestfs's qemu process and
your virtual machine are trying to update the disk image at the same time, since these
usually results in massive disk corruption).
STATE MACHINE
libguestfs uses a state machine to model the child process:
|
guestfs_create / guestfs_create_flags
|
|
____V_____
/ \
| CONFIG |
\__________/
^ ^ \
| \ \ guestfs_launch
| _\__V______
| / \
| | LAUNCHING |
| \___________/
| /
| guestfs_launch
| /
__|____V
/ \
| READY |
\________/
The normal transitions are (1) CONFIG (when the handle is created, but there is no child
process), (2) LAUNCHING (when the child process is booting up), (3) READY meaning the
appliance is up, actions can be issued to, and carried out by, the child process.
The guest may be killed by "guestfs_kill_subprocess" in guestfs(3), or may die
asynchronously at any time (eg. due to some internal error), and that causes the state to
transition back to CONFIG.
Configuration commands for qemu such as "guestfs_set_path" in guestfs(3) can only be
issued when in the CONFIG state.
The API offers one call that goes from CONFIG through LAUNCHING to READY.
"guestfs_launch" in guestfs(3) blocks until the child process is READY to accept commands
(or until some failure or timeout). "guestfs_launch" in guestfs(3) internally moves the
state from CONFIG to LAUNCHING while it is running.
API actions such as "guestfs_mount" in guestfs(3) can only be issued when in the READY
state. These API calls block waiting for the command to be carried out. There are no
non-blocking versions, and no way to issue more than one command per handle at the same
time.
Finally, the child process sends asynchronous messages back to the main program, such as
kernel log messages. You can register a callback to receive these messages.
INTERNALS
APPLIANCE BOOT PROCESS
This process has evolved and continues to evolve. The description here corresponds only
to the current version of libguestfs and is provided for information only.
In order to follow the stages involved below, enable libguestfs debugging (set the
environment variable "LIBGUESTFS_DEBUG=1").
Create the appliance
"supermin --build" is invoked to create the kernel, a small initrd and the appliance.
The appliance is cached in /var/tmp/.guestfs-<UID> (or in another directory if
"LIBGUESTFS_CACHEDIR" or "TMPDIR" are set).
For a complete description of how the appliance is created and cached, read the
supermin(1) man page.
Start qemu and boot the kernel
qemu is invoked to boot the kernel.
Run the initrd
"supermin --build" builds a small initrd. The initrd is not the appliance. The
purpose of the initrd is to load enough kernel modules in order that the appliance
itself can be mounted and started.
The initrd is a cpio archive called /var/tmp/.guestfs-<UID>/appliance.d/initrd.
When the initrd has started you will see messages showing that kernel modules are
being loaded, similar to this:
supermin: ext2 mini initrd starting up
supermin: mounting /sys
supermin: internal insmod libcrc32c.ko
supermin: internal insmod crc32c-intel.ko
Find and mount the appliance device
The appliance is a sparse file containing an ext2 filesystem which contains a familiar
(although reduced in size) Linux operating system. It would normally be called
/var/tmp/.guestfs-<UID>/appliance.d/root.
The regular disks being inspected by libguestfs are the first devices exposed by qemu
(eg. as /dev/vda).
The last disk added to qemu is the appliance itself (eg. /dev/vdb if there was only
one regular disk).
Thus the final job of the initrd is to locate the appliance disk, mount it, and switch
root into the appliance, and run /init from the appliance.
If this works successfully you will see messages such as:
supermin: picked /sys/block/vdb/dev as root device
supermin: creating /dev/root as block special 252:16
supermin: mounting new root on /root
supermin: chroot
Starting /init script ...
Note that "Starting /init script ..." indicates that the appliance's init script is
now running.
Initialize the appliance
The appliance itself now initializes itself. This involves starting certain processes
like "udev", possibly printing some debug information, and finally running the daemon
("guestfsd").
The daemon
Finally the daemon ("guestfsd") runs inside the appliance. If it runs you should see:
verbose daemon enabled
The daemon expects to see a named virtio-serial port exposed by qemu and connected on
the other end to the library.
The daemon connects to this port (and hence to the library) and sends a four byte
message "GUESTFS_LAUNCH_FLAG", which initiates the communication protocol (see below).
COMMUNICATION PROTOCOL
Don't rely on using this protocol directly. This section documents how it currently
works, but it may change at any time.
The protocol used to talk between the library and the daemon running inside the qemu
virtual machine is a simple RPC mechanism built on top of XDR (RFC 1014, RFC 1832, RFC
4506).
The detailed format of structures is in common/protocol/guestfs_protocol.x (note: this
file is automatically generated).
There are two broad cases, ordinary functions that don't have any "FileIn" and "FileOut"
parameters, which are handled with very simple request/reply messages. Then there are
functions that have any "FileIn" or "FileOut" parameters, which use the same request and
reply messages, but they may also be followed by files sent using a chunked encoding.
ORDINARY FUNCTIONS (NO FILEIN/FILEOUT PARAMS)
For ordinary functions, the request message is:
total length (header + arguments,
but not including the length word itself)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_args (encoded as XDR)
The total length field allows the daemon to allocate a fixed size buffer into which it
slurps the rest of the message. As a result, the total length is limited to
"GUESTFS_MESSAGE_MAX" bytes (currently 4MB), which means the effective size of any request
is limited to somewhere under this size.
Note also that many functions don't take any arguments, in which case the
"guestfs_foo_args" is completely omitted.
The header contains the procedure number ("guestfs_proc") which is how the receiver knows
what type of args structure to expect, or none at all.
For functions that take optional arguments, the optional arguments are encoded in the
"guestfs_foo_args" structure in the same way as ordinary arguments. A bitmask in the
header indicates which optional arguments are meaningful. The bitmask is also checked to
see if it contains bits set which the daemon does not know about (eg. if more optional
arguments were added in a later version of the library), and this causes the call to be
rejected.
The reply message for ordinary functions is:
total length (header + ret,
but not including the length word itself)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_ret (encoded as XDR)
As above the "guestfs_foo_ret" structure may be completely omitted for functions that
return no formal return values.
As above the total length of the reply is limited to "GUESTFS_MESSAGE_MAX".
In the case of an error, a flag is set in the header, and the reply message is slightly
changed:
total length (header + error,
but not including the length word itself)
struct guestfs_message_header (encoded as XDR)
struct guestfs_message_error (encoded as XDR)
The "guestfs_message_error" structure contains the error message as a string.
FUNCTIONS THAT HAVE FILEIN PARAMETERS
A "FileIn" parameter indicates that we transfer a file into the guest. The normal request
message is sent (see above). However this is followed by a sequence of file chunks.
total length (header + arguments,
but not including the length word itself,
and not including the chunks)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_args (encoded as XDR)
sequence of chunks for FileIn param #0
sequence of chunks for FileIn param #1 etc.
The "sequence of chunks" is:
length of chunk (not including length word itself)
struct guestfs_chunk (encoded as XDR)
length of chunk
struct guestfs_chunk (encoded as XDR)
...
length of chunk
struct guestfs_chunk (with data.data_len == 0)
The final chunk has the "data_len" field set to zero. Additionally a flag is set in the
final chunk to indicate either successful completion or early cancellation.
At time of writing there are no functions that have more than one FileIn parameter.
However this is (theoretically) supported, by sending the sequence of chunks for each
FileIn parameter one after another (from left to right).
Both the library (sender) and the daemon (receiver) may cancel the transfer. The library
does this by sending a chunk with a special flag set to indicate cancellation. When the
daemon sees this, it cancels the whole RPC, does not send any reply, and goes back to
reading the next request.
The daemon may also cancel. It does this by writing a special word "GUESTFS_CANCEL_FLAG"
to the socket. The library listens for this during the transfer, and if it gets it, it
will cancel the transfer (it sends a cancel chunk). The special word is chosen so that
even if cancellation happens right at the end of the transfer (after the library has
finished writing and has started listening for the reply), the "spurious" cancel flag will
not be confused with the reply message.
This protocol allows the transfer of arbitrary sized files (no 32 bit limit), and also
files where the size is not known in advance (eg. from pipes or sockets). However the
chunks are rather small ("GUESTFS_MAX_CHUNK_SIZE"), so that neither the library nor the
daemon need to keep much in memory.
FUNCTIONS THAT HAVE FILEOUT PARAMETERS
The protocol for FileOut parameters is exactly the same as for FileIn parameters, but with
the roles of daemon and library reversed.
total length (header + ret,
but not including the length word itself,
and not including the chunks)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_ret (encoded as XDR)
sequence of chunks for FileOut param #0
sequence of chunks for FileOut param #1 etc.
INITIAL MESSAGE
When the daemon launches it sends an initial word ("GUESTFS_LAUNCH_FLAG") which indicates
that the guest and daemon is alive. This is what "guestfs_launch" in guestfs(3) waits
for.
PROGRESS NOTIFICATION MESSAGES
The daemon may send progress notification messages at any time. These are distinguished
by the normal length word being replaced by "GUESTFS_PROGRESS_FLAG", followed by a fixed
size progress message.
The library turns them into progress callbacks (see "GUESTFS_EVENT_PROGRESS" in
guestfs(3)) if there is a callback registered, or discards them if not.
The daemon self-limits the frequency of progress messages it sends (see
"daemon/proto.c:notify_progress"). Not all calls generate progress messages.
FIXED APPLIANCE
When libguestfs (or libguestfs tools) are run, they search a path looking for an
appliance. The path is built into libguestfs, or can be set using the "LIBGUESTFS_PATH"
environment variable.
Normally a supermin appliance is located on this path (see "SUPERMIN APPLIANCE" in
supermin(1)). libguestfs reconstructs this into a full appliance by running "supermin
--build".
However, a simpler "fixed appliance" can also be used. libguestfs detects this by looking
for a directory on the path containing all the following files:
• kernel
• initrd
• root
• README.fixed (note that it must be present as well)
If the fixed appliance is found, libguestfs skips supermin entirely and just runs the
virtual machine (using qemu or the current backend, see "BACKEND" in guestfs(3)) with the
kernel, initrd and root disk from the fixed appliance.
Thus the fixed appliance can be used when a platform or a Linux distribution does not
support supermin. You build the fixed appliance on a platform that does support supermin
using libguestfs-make-fixed-appliance(1), copy it over, and use that to run libguestfs.
SEE ALSO
guestfs(3), guestfs-hacking(1), guestfs-examples(3), libguestfs-test-tool(1),
libguestfs-make-fixed-appliance(1), http://libguestfs.org/.
AUTHORS
Richard W.M. Jones ("rjones at redhat dot com")
COPYRIGHT
Copyright (C) 2009-2017 Red Hat Inc.
LICENSE
This library is free software; you can redistribute it and/or modify it under the terms of
the GNU Lesser General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this
library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301 USA
BUGS
To get a list of bugs against libguestfs, use this link:
https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools
To report a new bug against libguestfs, use this link:
https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools
When reporting a bug, please supply:
• The version of libguestfs.
• Where you got libguestfs (eg. which Linux distro, compiled from source, etc)
• Describe the bug accurately and give a way to reproduce it.
• Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
report.