Provided by: sieve-connect_0.88-1_all 
NAME
sieve-connect - managesieve command-line client
SYNOPSIS
sieve-connect [-s <hostname>] [-p <portspec>] [-u <user>] [a <authzid>]
[-m <authmech>] [-r realm] [-e execscript]
[... longopts ...]
sieve-connect [--localsieve <script>] [--remotesieve <script>]
[--debug] [--dumptlsinfo]
[--server <hostname>] [--port <portspec>] [--4|--6]
[--user <authentication_id>] [--authzid <authzid>]
[--realm <realm>] [--passwordfd <n>]
[--clientkey <file> --clientcert <file>]|[--clientkeycert <file>]
[--notlsverify|--nosslverify]
[--tlscertfingerprint|--sslcertfingerprint <dgsttype:digest>]
[--tlscapath <ca_directory>]|[--tlscafile <ca_file>]
[--tlshostname <hostname>]
[--noclearauth] [--noclearchan] [--clearchan]
[--authmech <mechanism>]
[--ignoreserverversion]
[--upload|--download|--list|--delete|--checkscript|--edit|
--activate|--deactivate]|[--exec <script>]
[--help|--man]
DESCRIPTION
sieve-connect is a client for the "MANAGESIEVE" protocol, which is an RFC-specified protocol for
manipulation of "Sieve" scripts in a repository. More simply, sieve-connect lets you control your mail-
filtering rule files on a mail server.
sieve-connect can be invoked with an action from the command-line to make it easy to script one-shot
actions, it can be provided with a script file or it can be left to enter an interactive command-loop,
where it supports tab-completion (if the supporting Perl module is available) and basic navigation of the
local file-system in the style of "FTP" clients.
sieve-connect supports the use of "TLS" via the "STARTTLS" command, including authentication via client
certificates. "sieve-connect" also supports whichever "SASL" mechanisms your Authen::SASL::Perl library
provides, as long as they do not require SASL protection layers.
In Interactive mode, a "help" command is available. Command parameters with a "%" in them are examined
to see if they match %KEYWORD, where "KEYWORD" is always in upper-case. The list of keywords may be
retrieved with the "keywords" command and includes items such as %DATE, %USER, etc.
OPTIONS
Option names may be given as the shortest unique prefix.
The remote sieve script name defaults to the same as the local sieve script name, so just specify the
local one if only one is needed; it was a deliberate decision to have the defaults this way around, to
make people think about names in the local filesystem. There is no default script name.
The --debug option turns on diagnostic traces. The --debugsasl option asks the SASL library for
debugging. The --dumptlsinfo shows the TLS (SSL) peer information; if specified together with --debug
then the server's PEM certificate will be provided as debug trace.
The --version option shows version information. When combined with --debug it will show implementation
dependency versions. The --help and --man options provide usage information.
The server can be a host or IP address, IPv4 or IPv6.
If a server is provided by --server then that takes precedence. If that option is not present, then
$IMAP_SERVER from the environment is checked and, if it's not a unix-domain socket path, is used with any
port specification stripped off.
For TLS verification, this is the default name used for hostnames (both SNI and verification); no
information derived from DNS is currently used as the trusted hostname identifier. (This is subject to
change in future, given DNSSEC). The --tlshostname option can be used to override the name used for TLS.
Next, unless --nosrv is given, checks are made for SRV records so as to search for a default server; if
the Mozilla::PublicSuffix Perl module is available, these checks are done for every level of the hostname
upto (but not including) the public suffix. If that module is not available, a crude heuristic is used:
as long as there are three dots in the hostname, SRV records for the part of the hostname after the first
dot are tried. If this is inappropriate, install Mozilla::PublicSuffix.
If no SRV records are found which point to a 'sieve', 'imaps' or 'imap' protocol service, of if a record
is found which says "no such service in this domain" (by having a target of "."), then the final default
server is localhost.
The port can be any Perl port specification, default is sieve(4190). A port from an SRV record will take
precedence. The Perl specification provides a name to look up in the system services database
(/etc/services) followed in parentheses by a default value to use if the name is not found. Thus this
default will honour a value of 2000 from /etc/services.
The --4 or --6 options may be used to coerce IPv4 or IPv6.
By default, the server is taken to be a domain, for which SRV records are looked up; use --nosrv to
inhibit SRV record lookup.
The --user option will be required unless you're on a Unix system with getpwuid() available and your
Cyrus account name matches your system account name. --authmech can be used to force a particular
authentication mechanism. --authzid can be used to request authorisation to act as the specified id.
--realm can be used to try to pass realm information to the authentication mechanism. If you want to
provide a password programmatically, use --passwordfd to state which file descriptor (typically 0) the
password can be read from. Everything until the newline before EOF is the password, so it can contain
embedded newlines. Do not provide passwords on a command-line or in a process environment.
Unless modified at install/packaging time, by default SSL certificate authority certificates are searched
for. The first attempt is to try, in turn, for environment variables $SSL_CERT_DIR & $SSL_CERT_FILE
which are the names supported by the OpenSSL library and so often supported by client commands. Next, if
the OpenSSL command "version" is available and the output "OPENSSLDIR" can be parsed and the "certs"
directory exists within that directory, then that location will be used. Finally, a fixed list of common
locations are searched and the first one to exist is used. Invoking with --debug will show more details
during the "setup:" phase.
Precedence above these defaults is given to the --tlscafile option if given, else the --tlscapath option
if that is given. The former is one file containing certificates, the latter is a directory.
Alternatively, if you are willing to accept the risk of man-in-the-middle active attacks and you are
unable to arrange for the relevant Certificate Authority certificate to be available, then you can lower
your safety with the --notlsverify option, also spelt --nosslverify.
If verification is requested (the default) but TLS is not available, we do not fall back to cleartext
insecure communications. Use --clearchan to change that, or set
$SIEVECONNECT_INSECURE_CLEARTEXT_FALLBACK non-empty in the environment.
If you don't want to (only) rely on CA systems you can explicitly set an expected server certificate
fingerprint using the --tlscertfingerprint option, also spelt --sslcertfingerprint. If you wish to
ignore CA validation, you still need to disable that explicitly (see above), as the default is to add an
extra constraint (pinning, within valid CA certificates). This option specifies the X.509 certificate
fingerprint (not a public key fingerprint), as given by OpenSSL. The first part of the value should be
an algorithm name, such as "sha256" or "sha1". That is followed by a colon, and then the fingerprint
data in its usual colon-delimited hexadecimal notation. Eg: "--tlscertfingerprint
sha256:24:B4:..28-more-fields..:A8:58"
For SSL client certificate authentication, either --clientkeycert may be used to refer to a file with
both the key and cert present or both --clientkey and --clientcert should point to the relevant files.
The data should be in PEM file-format.
The --noclearauth option will prevent use of cleartext authentication mechanisms unless protected by TLS.
The --noclearchan option will mandate use of some confidentiality layer; at this time only TLS is
supported.
By default, the server's "VERSION" capability will be used to filter the commands available. Use
--ignoreserverversion to prevent this.
The remaining options denote actions. One, and only one, action may be present. If no action is
present, the interactive mode is entered. If the exec action is present, commands are read from the
script instead.
--upload will upload a script to the server.
--download will download a script from the server.
--list will list the scripts which exist on the server. One of those scripts might be marked ACTIVE.
--delete will delete a script from the server.
--checkscript will ask the server to validate the local file provided.
--edit will download a script, invoke an editor upon it, ask the server to check the results (and offer
to re-edit if the server rejects it) and finally upload the result.
--activate will mark the specified remote script as the active one.
--deactivate will remove the active mark from the specified remote script without activating a
replacement.
--exec will take a file-name containing commands as though given in the normal read-eval-print loop.
Note that --check and --edit require a server which advertises a "VERSION" capability, see
--ignoreserverversion to override.
(If --server is not explicitly stated, it may be provided at the end of the command-line for
compatibility with sieveshell.)
EXAMPLES
Connect to a Sieve server and enter interactive mode, when you already have a Kerberos ticket and
GSSAPI/Kerberos is available:
$ sieve-connect --server imap.example.org
ReadLine support enabled.
>
Do the same, but with $IMAP_SERVER set in environ:
$ sieve-connect
ReadLine support enabled.
>
Upload a script from the current directory, being prompted to authenticate; note that the script won't be
activated (uploading just makes it available, possibly with the server having first checked it for
errors):
$ sieve-connect --server imap.example.org --user fred@example.org \
--localsieve fred.siv --upload
Sieve/IMAP Password: [password here, not shown]
$
See a lot of what's happening under the covers:
$ sieve-connect --debug
[ snip 30 or so lines ]
>
ENVIRONMENT
$IMAP_SERVER for a default IMAP server.
$USERNAME and $LOGNAME where the "getpwuid()" function is not available.
$SSL_CERT_DIR and $SSL_CERT_FILE for locating default Certificate Authority trust anchors.
$SIEVECONNECT_INSECURE_CLEARTEXT_FALLBACK to preserve old poor hygiene around TLS fallback.
$VISUAL, else $EDITOR, for the edit action.
BUGS
If the authentication protocol negotiates a protection layer then things will rapidly Go Bad. A
mitigating factor is that no protection layer should be negotiated whilst under STARTTLS protection.
Just use TLS!
When listing scripts, the format is based upon the raw server output, assuming that the server uses
quoted-strings for the script names. The output is just passed back on the basis that it's a fairly good
interface to pass to a program. But a server could choose to use literal strings, even though the
results are defined as line-break separated -- that would mean that some linebreaks are special.
Hopefully no server will do this.
If sieve-connect fails to connect to an IPv4 server without the -4 option being explicitly passed, then
you've encountered a portability issue in the IO::Socket::INET6 Perl library and need to upgrade that.
Most historical implementations used port 2000 for ManageSieve. RFC5804 allocates port 4190. This tool
uses a port-spec of "sieve(4190)" as the default port, which means that an /etc/services (or substitute)
entry for "sieve" as a TCP service takes precedence, but if that is not present, will assume 4190 as the
default. This change means that if you're still using port 2000 and do not have an /etc/services entry,
updating to/beyond release 0.75 of this tool will break invocations which do not specify a port. The
specification of the default port was moved to the user-configurable section at the top of the script and
administrators may wish to override the shipped default. You can bypass all of this mess by publishing
SRV records, per RFC5804.
The Net::DNS Perl module does not (at time of writing) provide full support for weighted prioritised SRV
records and I have not made any effort to fix this; whatever the default sort algorithm provides for SRV
is what is used for ordering.
If you don't specify a server and don't export $IMAP_SERVER in the environment then the search mechanism
is safer and more thorough if the Mozilla::PublicSuffix Perl module is installed. In particular, if your
hostname is also your domain name and the parent domain is administered by someone you don't trust, then
you'll regret not installing that module.
Probably need to sit down and work through the final RFC and see if any functionality is still missing.
NON-BUGS
Actually uses STARTTLS. Can handle script names with embedded whitespace. Author needs access to a
server which handles embedded quote characters properly to complete testing of that.
HISTORY
sieve-connect was written as a demonstration for the "info-cyrus" mailing-list, 2006-11-14. It was a
single-action-and-quit script for scripting purposes. The command-loop code was written (two days) later
and deliberately designed to be compatible with sieveshell.
Versions prior to 0.85 did not actually verify the peer certificate identity, although this author
stupidly believed that it did. API/expectations mismatch.
Versions prior to 0.88 defaulted to falling back to cleartext in the absence of STARTTLS if CA
information was configured locally and verification requested (the default). Today, this is no longer
acceptable for client-server communications; either verify-and-require-TLS or don't-verify-and-fallback-
to-cleartext. This is the new policy going forward; use --clearchan to allow fallback while still trying
to verify TLS (but why?) or --notlsverify to skip verification. Or add
$SIEVECONNECT_INSECURE_CLEARTEXT_FALLBACK non-empty in the environment to avoid the implicit noclearchan-
when-verify-enabled.
AUTHOR
Phil Pennock <phil-perl@spodhuis.org> is guilty, m'Lud.
There is a low-volume announcement list for new releases; the web interface is at
<http://mail.globnix.net/mailman/listinfo/sieve-connect-announce> or you can send mail,
<mailto:sieve-connect-announce-request@spodhuis.org?subject=subscribe>
AVAILABILITY
Releases are made available at <http://people.spodhuis.org/phil.pennock/software/> in the form of a
tarball and an associated detached PGP signature. All releases are signed, always, and always have been.
The signing key is in the PGP Strong Set (which means there's a stronger chance that you can verify the
identity of the key owner). Historically, releases were signed with key 0x403043153903637F. If you're
reading this text from a release, then I've cut a new release since switching to key 0x4D1E900E14C1CC04
and I expect that 4096RSA key to be used, barring major incident.
The source code is available via Git; the authoritative public-facing repository is currently
<https://github.com/philpennock/sieve-connect> and pull-requests and bug-reports are accepted there.
PREREQUISITES
Perl. Authen::SASL. IO::Socket::INET6. IO::Socket::SSL (at least version 1.14). Pod::Usage. Net::DNS
for SRV lookup. Pod::Simple::Text for built-in man command (optional). Term::ReadKey to get passwords
without echo. Various other Perl modules which are believed to be standard. Term::ReadLine will
significantly improve interactive mode. Term::ReadLine::Gnu will improve it further by allowing tab-
completion. Mozilla::PublicSuffix is highly recommended and will improve security.
INTEROPERABILITY
sieve-connect is regularly tested with the timsieved server distributed with the Cyrus IMAP server.
Further interoperability testing is underway, more is desired (test accounts appreciated!).
0.88 2016-08-29 sieve-connect(1)