Provided by: libx52pro0_0.1.1-2.3build1_amd64 
NAME
x52output - command line frontend for the x52pro library
SYNOPSIS
x52output text 0 'First Line'
x52output text 1 'Second Line'
x52output text 2 'Third Line'
x52output bri 0 40
x52output bri 1 50
x52output led 1 1 # not available for old X52
x52output time 1 12 20
x52output date 7 10 17
x52output second 30 # YOKE only
x52output offset 0 1 0 90 # set 90 minutes offset on time display 2
DESCRIPTION
x52output is a command line frontend for the x52pro MFD library. It is intended for debugging and/or
scripting purposes.
The x52pro MFD library provides access to the display/LEDS of following SAITEK pro flight devices
• X52 Pro Flight Control System
• X52 Flight Control System
• X52 Pro Flight Yoke.
x52output has following sub-commands:
text line text
Outputs a single line of text to one of the three lines on the x52/x52pro MFD. line is a number
from 0 to 2, text is an alphanumeric text of length 16. Some graphical characters are also
supported but no work has currently been spent on charset compatibility.
bri mfd brightness
Sets the brightness of either the button LEDs (x52pro only) or the MFD. mfd=0 selects the buttons
and mfd=1 selects the MFD. brightness is a decimal value in the range from 0 to 127.
led led-idx color
Sets the led color of one of the x52pro buttons. led-idx is a value from 1 to 19. The meaning of
the led-idx values are specified in the next paragraph.
time h24 hour minute
Sets the time shown on the MFD. h24=0 displays the time in AM/PM notation, h24=1 displays the time
in 24 Hour notation. hour is a value from 0 to 24 while minute is a value from 0 to 60.
date year month mday
Sets the date shown on the MFD. year, month, and mday are just values from 0 to 99. Using this
order will show as YY-MM-DD on the MFD but it is possible to use the three values in any order
preferred.
second second
Sets the second value shown on the Pro Flight Yoke MFD. Can be a value from 0 to 59.
offset offset
Sets the time offset of the secondary and tertiary time display of the x52/x52pro MFD. idx=0
selects the secondary display while idx=1 selects the tertiary display. neg=0 sets a positive
offset, neg=1 sets a negative offset. offset is in minutes from 0 to 1023.
led-idx for the led sub-command can be one of the following values:
1 LED(s) of Fire Button
2 Red LED of A Button
3 Green LED of A Button
4 Red LED of B Button
5 Green LED of B Button
6 Red LED of D Button
7 Green LED of D Button
8 Red LED of E Button
9 Green LED of E Button
10 Red LED of T1 Switch
11 Green LED of T1 Switch
12 Red LED of T2 Switch
13 Green LED of T2 Switch
14 Red LED of T3 Switch
15 Green LED of T3 Switch
16 Red LED of Coolie Hat
17 Green LED of Coolie Hat
18 Red LED of i Button
19 Green LED of i Button
x52output needs write access to the raw x52 USB device. This package is supplied with udev rules for
providing write access on the SAITEK MFD joysticks to the plugdev group members. If x52output fails,
permission problems can be checked by means of running it with sudo.
EXIT STATUS
If the joystick/yoke is not found x52output will return a status code of 1. In every other situation it
will return a status code of 0. This includes malformed command lines.
BUGS
x52output can currently control only a single SAITEK mfd device. If there are more than one devices
attached to the system, the first will always be used.
AUTHOR
Written by Eduard Hasenleithner <eduard@hasenleithner.at> x52output(1)