NAME

       sd_journal_get_fd, sd_journal_get_events, sd_journal_get_timeout, sd_journal_process,
       sd_journal_wait, sd_journal_reliable_fd, SD_JOURNAL_NOP, SD_JOURNAL_APPEND,
       SD_JOURNAL_INVALIDATE - Journal change notification interface

SYNOPSIS

       #include <systemd/sd-journal.h>

       int sd_journal_get_fd(sd_journal *j);

       int sd_journal_get_events(sd_journal *j);

       int sd_journal_get_timeout(sd_journal *j, uint64_t *timeout_usec);

       int sd_journal_process(sd_journal *j);

       int sd_journal_wait(sd_journal *j, uint64_t timeout_usec);

       int sd_journal_reliable_fd(sd_journal *j);

DESCRIPTION

       sd_journal_get_fd() returns a file descriptor that may be asynchronously polled in an
       external event loop and is signaled as soon as the journal changes, because new entries or
       files were added, rotation took place, or files have been deleted, and similar. The file
       descriptor is suitable for usage in poll(2). Use sd_journal_get_events() for an events
       mask to watch for. The call takes one argument: the journal context object. Note that not
       all file systems are capable of generating the necessary events for wakeups from this file
       descriptor for changes to be noticed immediately. In particular network files systems do
       not generate suitable file change events in all cases. Cases like this can be detected
       with sd_journal_reliable_fd(), below.  sd_journal_get_timeout() will ensure in these cases
       that wake-ups happen frequently enough for changes to be noticed, although with a certain
       latency.

       sd_journal_get_events() will return the poll() mask to wait for. This function will return
       a combination of POLLIN and POLLOUT and similar to fill into the ".events" field of struct
       pollfd.

       sd_journal_get_timeout() will return a timeout value for usage in poll(). This returns a
       value in microseconds since the epoch of CLOCK_MONOTONIC for timing out poll() in
       timeout_usec. See clock_gettime(2) for details about CLOCK_MONOTONIC. If there is no
       timeout to wait for, this will fill in (uint64_t) -1 instead. Note that poll() takes a
       relative timeout in milliseconds rather than an absolute timeout in microseconds. To
       convert the absolute 'us' timeout into relative 'ms', use code like the following:

           uint64_t t;
           int msec;
           sd_journal_get_timeout(m, &t);
           if (t == (uint64_t) -1)
             msec = -1;
           else {
             struct timespec ts;
             uint64_t n;
             clock_gettime(CLOCK_MONOTONIC, &ts);
             n = (uint64_t) ts.tv_sec * 1000000 + ts.tv_nsec / 1000;
             msec = t > n ? (int) ((t - n + 999) / 1000) : 0;
           }

       The code above does not do any error checking for brevity's sake. The calculated msec
       integer can be passed directly as poll()'s timeout parameter.

       After each poll() wake-up sd_journal_process() needs to be called to process events. This
       call will also indicate what kind of change has been detected (see below; note that
       spurious wake-ups are possible).

       A synchronous alternative for using sd_journal_get_fd(), sd_journal_get_events(),
       sd_journal_get_timeout() and sd_journal_process() is sd_journal_wait(). It will
       synchronously wait until the journal gets changed. The maximum time this call sleeps may
       be controlled with the timeout_usec parameter. Pass (uint64_t) -1 to wait indefinitely.
       Internally this call simply combines sd_journal_get_fd(), sd_journal_get_events(),
       sd_journal_get_timeout(), poll() and sd_journal_process() into one.

       sd_journal_reliable_fd() may be used to check whether the wakeup events from the file
       descriptor returned by sd_journal_get_fd() are known to be immediately triggered. On
       certain file systems where file change events from the OS are not available (such as NFS)
       changes need to be polled for repeatedly, and hence are detected only with a certain
       latency. This call will return a positive value if the journal changes are detected
       immediately and zero when they need to be polled for and hence might be noticed only with
       a certain latency. Note that there is usually no need to invoke this function directly as
       sd_journal_get_timeout() on these file systems will ask for timeouts explicitly anyway.

RETURN VALUE

       sd_journal_get_fd() returns a valid file descriptor on success or a negative errno-style
       error code.

       sd_journal_get_events() returns a combination of POLLIN, POLLOUT and suchlike on success
       or a negative errno-style error code.

       sd_journal_reliable_fd() returns a positive integer if the file descriptor returned by
       sd_journal_get_fd() will generate wake-ups immediately for all journal changes. Returns 0
       if there might be a latency involved.

       sd_journal_process() and sd_journal_wait() return one of SD_JOURNAL_NOP, SD_JOURNAL_APPEND
       or SD_JOURNAL_INVALIDATE on success or a negative errno-style error code. If
       SD_JOURNAL_NOP is returned, the journal did not change since the last invocation. If
       SD_JOURNAL_APPEND is returned, new entries have been appended to the end of the journal.
       If SD_JOURNAL_INVALIDATE, journal files were added or removed (possibly due to rotation).
       In the latter event, live-view UIs should probably refresh their entire display, while in
       the case of SD_JOURNAL_APPEND, it is sufficient to simply continue reading at the previous
       end of the journal.

SIGNAL SAFETY

       In general, sd_journal_get_fd(), sd_journal_get_events(), and sd_journal_get_timeout() are
       not "async signal safe" in the meaning of signal-safety(7). Nevertheless, only the first
       call to any of those three functions performs unsafe operations, so subsequent calls are
       safe.

       sd_journal_process() and sd_journal_wait() are not safe.  sd_journal_reliable_fd() is
       safe.

NOTES

       The sd_journal_get_fd(), sd_journal_get_events(), sd_journal_reliable_fd(),
       sd_journal_process() and sd_journal_wait() interfaces are available as a shared library,
       which can be compiled and linked to with the libsystemd pkg-config(1) file.

EXAMPLES

       Iterating through the journal, in a live view tracking all changes:

           #include <stdio.h>
           #include <string.h>
           #include <systemd/sd-journal.h>

           int main(int argc, char *argv[]) {
             int r;
             sd_journal *j;
             r = sd_journal_open(&j, SD_JOURNAL_LOCAL_ONLY);
             if (r < 0) {
               fprintf(stderr, "Failed to open journal: %s\n", strerror(-r));
               return 1;
             }
             for (;;)  {
               const void *d;
               size_t l;
               r = sd_journal_next(j);
               if (r < 0) {
                 fprintf(stderr, "Failed to iterate to next entry: %s\n", strerror(-r));
                 break;
               }
               if (r == 0) {
                 /* Reached the end, let's wait for changes, and try again */
                 r = sd_journal_wait(j, (uint64_t) -1);
                 if (r < 0) {
                   fprintf(stderr, "Failed to wait for changes: %s\n", strerror(-r));
                   break;
                 }
                 continue;
               }
               r = sd_journal_get_data(j, "MESSAGE", &d, &l);
               if (r < 0) {
                 fprintf(stderr, "Failed to read message field: %s\n", strerror(-r));
                 continue;
               }
               printf("%.*s\n", (int) l, (const char*) d);
             }
             sd_journal_close(j);
             return 0;
           }

       Waiting with poll() (this example lacks all error checking for the sake of simplicity):

           #include <poll.h>
           #include <systemd/sd-journal.h>

           int wait_for_changes(sd_journal *j) {
             struct pollfd pollfd;
             int msec;

             sd_journal_get_timeout(m, &t);
             if (t == (uint64_t) -1)
               msec = -1;
             else {
               struct timespec ts;
               uint64_t n;
               clock_gettime(CLOCK_MONOTONIC, &ts);
               n = (uint64_t) ts.tv_sec * 1000000 + ts.tv_nsec / 1000;
               msec = t > n ? (int) ((t - n + 999) / 1000) : 0;
             }

             pollfd.fd = sd_journal_get_fd(j);
             pollfd.events = sd_journal_get_events(j);
             poll(&pollfd, 1, msec);
             return sd_journal_process(j);
           }

SEE ALSO

       systemd(1), sd-journal(3), sd_journal_open(3), sd_journal_next(3), poll(2),
       clock_gettime(2)