bionic (7) ocf_heartbeat_IPaddr2.7.gz
NAME
ocf_heartbeat_IPaddr2 - Manages virtual IPv4 and IPv6 addresses (Linux specific version)
SYNOPSIS
IPaddr2 [start | stop | status | monitor | meta-data | validate-all]
DESCRIPTION
This Linux-specific resource manages IP alias IP addresses. It can add an IP alias, or remove one. In
addition, it can implement Cluster Alias IP functionality if invoked as a clone resource.
If used as a clone, you should explicitly set clone-node-max >= 2, and/or clone-max < number of nodes. In
case of node failure, clone instances need to be re-allocated on surviving nodes. This would not be
possible if there is already an instance on those nodes, and clone-node-max=1 (which is the default).
SUPPORTED PARAMETERS
ip
The IPv4 (dotted quad notation) or IPv6 address (colon hexadecimal notation) example IPv4
"192.168.1.1". example IPv6 "2001:db8:DC28:0:0:FC57:D4C8:1FFF".
(unique, required, string, no default)
nic
The base network interface on which the IP address will be brought online. If left empty, the script
will try and determine this from the routing table.
Do NOT specify an alias interface in the form eth0:1 or anything here; rather, specify the base
interface only. If you want a label, see the iflabel parameter.
Prerequisite:
There must be at least one static IP address, which is not managed by the cluster, assigned to the
network interface. If you can not assign any static IP address on the interface, modify this kernel
parameter:
sysctl -w net.ipv4.conf.all.promote_secondaries=1 # (or per device)
(optional, string, no default)
cidr_netmask
The netmask for the interface in CIDR format (e.g., 24 and not 255.255.255.0)
If unspecified, the script will also try to determine this from the routing table.
(optional, string, no default)
broadcast
Broadcast address associated with the IP. It is possible to use the special symbols '+' and '-'
instead of the broadcast address. In this case, the broadcast address is derived by setting/resetting
the host bits of the interface prefix.
(optional, string, no default)
iflabel
You can specify an additional label for your IP address here. This label is appended to your
interface name.
The kernel allows alphanumeric labels up to a maximum length of 15 characters including the interface
name and colon (e.g. eth0:foobar1234)
A label can be specified in nic parameter but it is deprecated. If a label is specified in nic name,
this parameter has no effect.
(optional, string, no default)
lvs_support
Enable support for LVS Direct Routing configurations. In case a IP address is stopped, only move it
to the loopback device to allow the local node to continue to service requests, but no longer
advertise it on the network.
Notes for IPv6: It is not necessary to enable this option on IPv6. Instead, enable
'lvs_ipv6_addrlabel' option for LVS-DR usage on IPv6.
(optional, boolean, default false)
lvs_ipv6_addrlabel
Enable adding IPv6 address label so IPv6 traffic originating from the address's interface does not
use this address as the source. This is necessary for LVS-DR health checks to realservers to work.
Without it, the most recently added IPv6 address (probably the address added by IPaddr2) will be used
as the source address for IPv6 traffic from that interface and since that address exists on loopback
on the realservers, the realserver response to pings/connections will never leave its loopback. See
RFC3484 for the detail of the source address selection.
See also 'lvs_ipv6_addrlabel_value' parameter.
(optional, boolean, default false)
lvs_ipv6_addrlabel_value
Specify IPv6 address label value used when 'lvs_ipv6_addrlabel' is enabled. The value should be an
unused label in the policy table which is shown by 'ip addrlabel list' command. You would rarely need
to change this parameter.
(optional, integer, default 99)
mac
Set the interface MAC address explicitly. Currently only used in case of the Cluster IP Alias. Leave
empty to chose automatically.
(optional, string, no default)
clusterip_hash
Specify the hashing algorithm used for the Cluster IP functionality.
(optional, string, default "sourceip-sourceport")
unique_clone_address
If true, add the clone ID to the supplied value of IP to create a unique address to manage
(optional, boolean, default false)
arp_interval
Specify the interval between unsolicited ARP packets in milliseconds.
This parameter is deprecated and used for the backward compatibility only. It is effective only for
the send_arp binary which is built with libnet, and send_ua for IPv6. It has no effect for other
arp_sender.
(optional, integer, default 200)
arp_count
Number of unsolicited ARP packets to send at resource initialization.
(optional, integer, default 5)
arp_count_refresh
Number of unsolicited ARP packets to send during resource monitoring. Doing so helps mitigate issues
of stuck ARP caches resulting from split-brain situations.
(optional, integer, default 0)
arp_bg
Whether or not to send the ARP packets in the background.
(optional, string, default "true")
arp_sender
The program to send ARP packets with on start. Available options are: - send_arp: default -
ipoibarping: default for infiniband interfaces if ipoibarping is available - iputils_arping: use
arping in iputils package - libnet_arping: use another variant of arping based on libnet
(optional, string, no default)
send_arp_opts
Extra options to pass to the arp_sender program. Available options are vary depending on which
arp_sender is used.
A typical use case is specifying '-A' for iputils_arping to use ARP REPLY instead of ARP REQUEST as
Gratuitous ARPs.
(optional, string, no default)
flush_routes
Flush the routing table on stop. This is for applications which use the cluster IP address and which
run on the same physical host that the IP address lives on. The Linux kernel may force that
application to take a shortcut to the local loopback interface, instead of the interface the address
is really bound to. Under those circumstances, an application may, somewhat unexpectedly, continue to
use connections for some time even after the IP address is deconfigured. Set this parameter in order
to immediately disable said shortcut when the IP address goes away.
(optional, boolean, default false)
run_arping
Whether or not to run arping for IPv4 collision detection check.
(optional, string, default "false")
preferred_lft
For IPv6, set the preferred lifetime of the IP address. This can be used to ensure that the created
IP address will not be used as a source address for routing. Expects a value as specified in section
5.5.4 of RFC 4862.
(optional, string, default "forever")
SUPPORTED ACTIONS
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 20s.
stop
Stops the resource. Suggested minimum timeout: 20s.
status
Performs a status check. Suggested minimum timeout: 20s. Suggested interval: 10s.
monitor
Performs a detailed status check. Suggested minimum timeout: 20s. Suggested interval: 10s.
meta-data
Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5s.
validate-all
Performs a validation of the resource configuration. Suggested minimum timeout: 20s.
EXAMPLE CRM SHELL
The following is an example configuration for a IPaddr2 resource using the crm(8) shell: primitive p_IPaddr2 ocf:heartbeat:IPaddr2 \ params \ ip=string \ op monitor depth="0" timeout="20s" interval="10s"
EXAMPLE PCS
The following is an example configuration for a IPaddr2 resource using pcs(8) pcs resource create p_IPaddr2 ocf:heartbeat:IPaddr2 \ ip=string \ op monitor depth="0" timeout="20s" interval="10s"
SEE ALSO
http://clusterlabs.org/
AUTHOR
ClusterLabs contributors (see the resource agent source for information about individual authors)