Provided by: ipmiutil_3.0.7-1build1_amd64 bug

NAME
       ipmiutil_delloem - OEM commands for Dell servers


SYNOPSIS
       ipmiutil delloem [-mx -NPRUEFJTVY] commands


DESCRIPTION
       ipmiutil  delloem  commands  is  a  program that uses Dell OEM IPMI commands to perform platform-specific
       functions.


OPTIONS
       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00).  This could be used  for  PICMG  or  ATCA
              blade  systems.   The  trailing  character,  if  present, indicates SMI addressing if 's', or IPMB
              addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename or IP address of the remote  target  system.   If  a  nodename  is  specified,  IPMI  LAN
              interface is used.  Otherwise the local system management interface is used.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs,
              smb.  Note that lan2i means lan2 with intelplus.  The default is to detect  any  available  driver
              type and use it.

       -J     Use   the  specified  LanPlus  cipher  suite  (0  thru  17):  0=none/none/none,  1=sha1/none/none,
              2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40,  6=md5/none/none,
              ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback level, 2=User level, 3=Operator level,
              4=Administrator level (default), 5=OEM level.

       -Y     Yes, do prompt the user for the IPMI LAN remote password.  Alternatives for the password are -E or
              -P.


COMMANDS
       mac list
                 Lists the MAC address of LOMs

       mac get <NIC number>
                 Shows the MAC address of specified LOM. 0-7 System LOM, 8- DRAC/iDRAC.

       lan set <Mode>
                 Sets the NIC Selection Mode (dedicated, shared,
                     shared with failover lom2, shared with Failover all loms).

       lan get
                 Returns the current NIC Selection Mode (dedicated, shared,
                  shared with failover lom2, shared with Failover all loms).

       lan get  active
                 Returns the current active NIC (dedicated, LOM1, LOM2, LOM3, LOM4).

       powermonitor
                 Shows power tracking statistics

       powermonitor clear  cumulativepower
                 Reset cumulative power reading

       powermonitor clear  peakpower
                 Reset peak power reading

       powermonitor powerconsumption
                 Displays power consumption in <watt|btuphr>

       powermonitor powerconsumptionhistory  <watt|btuphr>
                 Displays power consumption history

       powermonitor getpowerbudget
                 Displays power cap in <watt|btuphr>

       powermonitor setpowerbudget  <val> <watt|btuphr|percent>
                 Allows user to set the  power cap in <watt|BTU/hr|percentage>

       powermonitor enablepowercap
                 To enable set power cap

       powermonitor disablepowercap
                 To disable set power cap

       windbg start
                 Starts the windbg session (Cold Reset & SOL Activation)

       windbg end
                 Ends the windbg session (SOL Deactivation)

       vFlash info Card
                 Shows Extended SD Card information


SEE ALSO
       ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8)
       ireset(8) isel(8) isensor(8) iserial(8) isol(8)


WARNINGS
       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.


COPYRIGHT
       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.


AUTHOR
       Andy Cress <arcress at users.sourceforge.net>

                                            Version 1.0: 17 Aug 2011                                 IDELLOEM(8)