Provided by: ledmon_0.90-0ubuntu1~18.04.1_amd64 bug

NAME

       ledmon - Intel(R) LED monitor service for storage enclosures.

SYNOPSIS

       ledmon [OPTIONS]

DESCRIPTION

       The ledmon application is a daemon process used to monitor a state of software RAID
       devices (md only) or a state of block devices. The state is visualizing on LEDs associated
       to each slot in an enclosure or a drive bay. There are two types of system: 2-LEDs system
       (Activity LED, Status LED) and 3-LEDs system (Activity LED, Locate LED, Fail LED). This
       application has the highest priority when accessing the LEDs.

       The ledmon application uses SGPIO and SES-2 protocol to control LEDs. The program
       implements IBPI patterns of SFF-8489 specification for SGPIO. Please note some enclosures
       do not stick close to SFF-8489 specification. It might happen that enclosure processor
       will accept IBPI pattern but it will blink LEDs not according to SFF-8489 specification or
       it has limited number of patterns supported.

       LED management (AHCI) and SAF-TE protocols are not supported.

       There's no method provided to specify which RAID volume should be monitored and which not.
       The ledmon application monitors all RAID devices and visualizes their state.

       The ledmon application has been verified to work with Intel(R) storage controllers (i.e.
       Intel(R) AHCI controller and Intel(R) SAS controller).  The application might work with
       storage controllers of other vendors (especially SAS/SCSI controllers). However storage
       controllers of other vendors have not been tested.

       The ledmon application is part of Intel(R) Enclosure LED Utilities. Only single instance
       of the application is allowed.

OPTIONS

       -c or --config=path
               Sets a path to local configuration file. If this option is specified the global
               configuration file and user configuration file has no effect.

       -l or --log=path
               Sets a path to local log file. If this option is specified the global log file
               /var/log/ledmon.log is not used.

       -t or --interval=seconds
               Sets time interval between scans of sysfs. The value is given in seconds.  The
               minimum is 5 seconds the maximum is not specified.

       --quiet or --error or --warning or --info or --debug or --all
               Verbose level - 'quiet' means no logging at all and 'all' means to log everything.
               The levels are given in order. If user specifies more then one verbose option the
               last option comes into effect. The default level is 'warning'. Verbose level also
               can be set by --log-level=level.

       -h or --help
               Prints this text out and exits.

       -v or --version
               Displays version of ledmon and information about the license and exits.

FILES

       /var/log/ledmon.log
               Global log file, used by ledmon application. To force logging to user defined file
               use -l option switch.

       /etc/ledmon.conf
               Global configuration file, shared between ledmon and all ledctl application
               instances. Local configuration file can be used by running ledmon with -c switch.

LICENSE

       Copyright (c) 2009-2017 Intel Corporation.

       This program is distributed under the terms of the GNU General Public License as published
       by the Free Software Foundation. See the build-in help for details on the License and the
       lack of warranty.

BUGS

       The ledmon application does not recognize PFA state (Predicted Failure Analysis), hence
       the PFA pattern from SFF-8489 specification is not visualized.

SEE ALSO

       ledctl(8), ledmon.conf(5)

AUTHOR

       This manual page was written by Artur Wojcik <artur.wojcik@intel.com>. It may be used by
       others.