Provided by: lvm2_2.02.176-4.1ubuntu3.18.04.3_amd64 bug

NAME

       vgreduce - Remove physical volume(s) from a volume group

SYNOPSIS

       vgreduce option_args position_args
           [ option_args ]

        -a|--all
        -A|--autobackup y|n
           --commandprofile String
           --config String
        -d|--debug
           --driverloaded y|n
        -f|--force
        -h|--help
           --longhelp
           --mirrorsonly
           --profile String
        -q|--quiet
           --removemissing
           --reportformat basic|json
        -t|--test
        -v|--verbose
           --version
        -y|--yes

DESCRIPTION

       vgreduce removes one or more unused PVs from a VG.

USAGE

       Remove a PV from a VG.

       vgreduce VG PV ...
           [ COMMON_OPTIONS ]
       -

       Remove all unused PVs from a VG.

       vgreduce -a|--all VG
           [ COMMON_OPTIONS ]
       -

       Remove all missing PVs from a VG.

       vgreduce --removemissing VG
           [    --mirrorsonly ]
           [ COMMON_OPTIONS ]
       -

       Common options for command:
           [ -A|--autobackup y|n ]
           [ -f|--force ]
           [    --reportformat basic|json ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --longhelp ]
           [    --profile String ]
           [    --version ]

OPTIONS

       -a|--all
              Removes all empty PVs if none are named on the command line.

       -A|--autobackup y|n
              Specifies if metadata should be backed up automatically after a change.  Enabling
              this is strongly advised! See vgcfgbackup(8) for more information.

       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf settings.  The String arg
              uses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
              to the log file and/or syslog (if configured).

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       -f|--force ...
              Override various checks, confirmations and protections.  Use with extreme caution.

       -h|--help
              Display help text.

       --longhelp
              Display long help text.

       --mirrorsonly
              Only remove missing PVs from mirror LVs.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --removemissing
              Removes all missing PVs from the VG, if there are no LVs allocated on them. This
              resumes normal operation of the VG (new LVs may again be created, changed and so
              on).  If this is not possible because LVs are referencing the missing PVs, this
              option can be combined with --force to have the command remove any partial LVs. In
              this case, any LVs and dependent snapshots that were partly on the missing disks
              are removed completely, including those parts on disks that are still present.  If
              LVs spanned several disks, including ones that are lost, salvaging some data first
              may be possible by activating LVs in partial mode.

       --reportformat basic|json
              Overrides current output format for reports which is defined globally by the
              report/output_format setting in lvm.conf.  basic is the original format with
              columns and rows.  If there is more than one report per command, each report is
              prefixed with the report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by
              disabling all metadata writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage operations if a
              tool relies on reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       VG
              Volume Group name.  See lvm(8) for valid names.

       PV
              Physical Volume name, a device path under /dev.   For  commands  managing  physical
              extents,  a  PV  positional  arg  generally accepts a suffix indicating a range (or
              multiple ranges) of physical extents (PEs).  When  the  first  PE  is  omitted,  it
              defaults to the start of the device, and when the last PE is omitted it defaults to
              end.  Start and end  range  (inclusive):  PV[:PE-PE]...   Start  and  length  range
              (counting from 0): PV[:PE+PE]...

       String
              See the option description for information about the string content.

       Size[UNIT]
              Size  is  an  input  number  that accepts an optional unit.  Input units are always
              treated as base two values, regardless of capitalization, e.g.  'k'  and  'K'  both
              refer  to  1024.  The default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is
              sectors  of 512 bytes, k|K is kilobytes, m|M is megabytes, g|G is gigabytes, t|T is
              terabytes, p|P is petabytes, e|E is exabytes.  (This should not  be  confused  with
              the output control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See  lvm(8)  for  information  about  environment  variables  used  by  lvm.  For example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8) lvm.conf(5) lvmconfig(8)

       pvchange(8) pvck(8) pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8)  pvresize(8)  pvs(8)
       pvscan(8)

       vgcfgbackup(8)  vgcfgrestore(8)  vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8)
       vgexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8)  vgmknodes(8)  vgreduce(8)
       vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)

       lvcreate(8)  lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8)  lvreduce(8) lvremove(8)
       lvrename(8) lvresize(8) lvs(8) lvscan(8)

       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)

       dmeventd(8)  lvmetad(8)  lvmpolld(8)  lvmlockd(8)   lvmlockctl(8)   clvmd(8)   cmirrord(8)
       lvmdbusd(8)

       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)