Ubuntu Manpage: xfs_repair - repair an XFS filesystem

Provided by: xfsprogs_4.9.0+nmu1ubuntu2_amd64

NAME

       xfs_repair - repair an XFS filesystem

SYNOPSIS

       xfs_repair  [  -dfLnPv  ]  [  -m  maxmem  ] [ -c subopt=value ] [ -o subopt[=value] ] [ -t
       interval ] [ -l logdev ] [ -r rtdev ] device
       xfs_repair -V

DESCRIPTION

       xfs_repair repairs corrupt or damaged XFS filesystems (see  xfs(5)).   The  filesystem  is
       specified  using the device argument which should be the device name of the disk partition
       or volume containing the filesystem. If given the name of a block device, xfs_repair  will
       attempt to find the raw device associated with the specified block device and will use the
       raw device instead.

       Regardless, the filesystem to be repaired must  be  unmounted,  otherwise,  the  resulting
       filesystem may be inconsistent or corrupt.

OPTIONS

-f Specifies that the filesystem image to be processed is stored in a regular file at
device (see the mkfs.xfs -d file option). This might happen if an image copy of a
filesystem has been copied or written into an ordinary file. This option implies
that any external log or realtime section is also in an ordinary file.

-L Force Log Zeroing. Forces xfs_repair to zero the log even if it is dirty (contains
metadata changes). When using this option the filesystem will likely appear to be
corrupt, and can cause the loss of user files and/or data.

-l logdev
Specifies the device special file where the filesystem's external log resides. Only
for those filesystems which use an external log. See the mkfs.xfs -l option, and
refer to xfs(5) for a detailed description of the XFS log.

-r rtdev
Specifies the device special file where the filesystem's realtime section resides.
Only for those filesystems which use a realtime section. See the mkfs.xfs -r
option, and refer to xfs(5) for a detailed description of the XFS realtime section.

-n No modify mode. Specifies that xfs_repair should not modify the filesystem but
should only scan the filesystem and indicate what repairs would have been made.

-P Disable prefetching of inode and directory blocks. Use this option if you find
xfs_repair gets stuck and stops proceeding. Interrupting a stuck xfs_repair is
safe.

-m maxmem
Specifies the approximate maximum amount of memory, in megabytes, to use for
xfs_repair. xfs_repair has its own internal block cache which will scale out up to
the lesser of the process's virtual address limit or about 75% of the system's
physical RAM. This option overrides these limits.

NOTE: These memory limits are only approximate and may use more than the specified
limit.

-c subopt=value
Change filesystem parameters. Refer to xfs_admin(8) for information on changing
filesystem parameters.

-o subopt[=value]
Override what the program might conclude about the filesystem if left to its own
devices.

The suboptions supported are:

bhash=bhashsize
overrides the default buffer cache hash size. The total number of buffer
cache entries are limited to 8 times this amount. The default size is set
to use up the remainder of 75% of the system's physical RAM size.

ag_stride=ags_per_concat_unit
This creates additional processing threads to parallel process AGs that
span multiple concat units. This can significantly reduce repair times on
concat based filesystems.

force_geometry
Check the filesystem even if geometry information could not be validated.
Geometry information can not be validated if only a single allocation
group exists and thus we do not have a backup superblock available, or if
there are two allocation groups and the two superblocks do not agree on
the filesystem geometry. Only use this option if you validated the
geometry yourself and know what you are doing. If In doubt run in no
modify mode first.

-t interval
Modify reporting interval, specified in seconds. During long runs xfs_repair
outputs its progress every 15 minutes. Reporting is only activated when ag_stride
is enabled.

-v Verbose output. May be specified multiple times to increase verbosity.

-d Repair dangerously. Allow xfs_repair to repair an XFS filesystem mounted read only.
This is typically done on a root filesystem from single user mode, immediately
followed by a reboot.

-V Prints the version number and exits.

Checks Performed
Inconsistencies corrected include the following:

1. Inode and inode blockmap (addressing) checks: bad magic number in inode, bad magic
numbers in inode blockmap blocks, extents out of order, incorrect number of records
in inode blockmap blocks, blocks claimed that are not in a legal data area of the
filesystem, blocks that are claimed by more than one inode.

2. Inode allocation map checks: bad magic number in inode map blocks, inode state as
indicated by map (free or in-use) inconsistent with state indicated by the inode,
inodes referenced by the filesystem that do not appear in the inode allocation map,
inode allocation map referencing blocks that do not appear to contain inodes.

3. Size checks: number of blocks claimed by inode inconsistent with inode size,
directory size not block aligned, inode size not consistent with inode format.

4. Directory checks: bad magic numbers in directory blocks, incorrect number of
entries in a directory block, bad freespace information in a directory leaf block,
entry pointing to an unallocated (free) or out of range inode, overlapping entries,
missing or incorrect dot and dotdot entries, entries out of hashvalue order,
incorrect internal directory pointers, directory type not consistent with inode
format and size.

5. Pathname checks: files or directories not referenced by a pathname starting from
the filesystem root, illegal pathname components.

6. Link count checks: link counts that do not agree with the number of directory
references to the inode.

7. Freemap checks: blocks claimed free by the freemap but also claimed by an inode,
blocks unclaimed by any inode but not appearing in the freemap.

8. Super Block checks: total free block and/or free i-node count incorrect, filesystem
geometry inconsistent, secondary and primary superblocks contradictory.

Orphaned files and directories (allocated, in-use but unreferenced) are reconnected by
placing them in the lost+found directory. The name assigned is the inode number.

Disk Errors
xfs_repair aborts on most disk I/O errors. Therefore, if you are trying to repair a
filesystem that was damaged due to a disk drive failure, steps should be taken to ensure
that all blocks in the filesystem are readable and writable before attempting to use
xfs_repair to repair the filesystem. A possible method is using dd(8) to copy the data
onto a good disk.

lost+found
The directory lost+found does not have to already exist in the filesystem being repaired.
If the directory does not exist, it is automatically created if required. If it already
exists, it will be checked for consistency and if valid will be used for additional
orphaned files. Invalid lost+found directories are removed and recreated. Existing files
in a valid lost+found are not removed or renamed.

Corrupted Superblocks
XFS has both primary and secondary superblocks. xfs_repair uses information in the
primary superblock to automatically find and validate the primary superblock against the
secondary superblocks before proceeding. Should the primary be too corrupted to be useful
in locating the secondary superblocks, the program scans the filesystem until it finds and
validates some secondary superblocks. At that point, it generates a primary superblock.

Quotas
If quotas are in use, it is possible that xfs_repair will clear some or all of the
filesystem quota information. If so, the program issues a warning just before it
terminates. If all quota information is lost, quotas are disabled and the program issues
a warning to that effect.

Note that xfs_repair does not check the validity of quota limits. It is recommended that
you check the quota limit information manually after xfs_repair. Also, space usage
information is automatically regenerated the next time the filesystem is mounted with
quotas turned on, so the next quota mount of the filesystem may take some time.

DIAGNOSTICS

xfs_repair issues informative messages as it proceeds indicating what it has found that is
abnormal or any corrective action that it has taken. Most of the messages are completely
understandable only to those who are knowledgeable about the structure of the filesystem.
Some of the more common messages are explained here. Note that the language of the
messages is slightly different if xfs_repair is run in no-modify mode because the program
is not changing anything on disk. No-modify mode indicates what it would do to repair the
filesystem if run without the no-modify flag.

disconnected inode ino, moving to lost+found

An inode numbered ino was not connected to the filesystem directory tree and was
reconnected to the lost+found directory. The inode is assigned the name of its
inode number (ino). If a lost+found directory does not exist, it is automatically
created.

disconnected dir inode ino, moving to lost+found

As above only the inode is a directory inode. If a directory inode is attached to
lost+found, all of its children (if any) stay attached to the directory and
therefore get automatically reconnected when the directory is reconnected.

imap claims in-use inode ino is free, correcting imap

The inode allocation map thinks that inode ino is free whereas examination of the
inode indicates that the inode may be in use (although it may be disconnected).
The program updates the inode allocation map.

imap claims free inode ino is in use, correcting imap

The inode allocation map thinks that inode ino is in use whereas examination of the
inode indicates that the inode is not in use and therefore is free. The program
updates the inode allocation map.

resetting inode ino nlinks from x to y

The program detected a mismatch between the number of valid directory entries
referencing inode ino and the number of references recorded in the inode and
corrected the the number in the inode.

fork-type fork in ino ino claims used block bno

Inode ino claims a block bno that is used (claimed) by either another inode or the
filesystem itself for metadata storage. The fork-type is either data or attr
indicating whether the problem lies in the portion of the inode that tracks regular
data or the portion of the inode that stores XFS attributes. If the inode is a
real-time (rt) inode, the message says so. Any inode that claims blocks used by
the filesystem is deleted. If two or more inodes claim the same block, they are
both deleted.

fork-type fork in ino ino claims dup extent ...

Inode ino claims a block in an extent known to be claimed more than once. The
offset in the inode, start and length of the extent is given. The message is
slightly different if the inode is a real-time (rt) inode and the extent is
therefore a real-time (rt) extent.

inode ino - bad extent ...

An extent record in the blockmap of inode ino claims blocks that are out of the
legal range of the filesystem. The message supplies the start, end, and file
offset of the extent. The message is slightly different if the extent is a real-
time (rt) extent.

bad fork-type fork in inode ino

There was something structurally wrong or inconsistent with the data structures
that map offsets to filesystem blocks.

cleared inode ino

There was something wrong with the inode that was uncorrectable so the program
freed the inode. This usually happens because the inode claims blocks that are
used by something else or the inode itself is badly corrupted. Typically, this
message is preceded by one or more messages indicating why the inode needed to be
cleared.

bad attribute fork in inode ino, clearing attr fork

There was something wrong with the portion of the inode that stores XFS attributes
(the attribute fork) so the program reset the attribute fork. As a result of this,
all attributes on that inode are lost.

correcting nextents for inode ino, was x - counted y

The program found that the number of extents used to store the data in the inode is
wrong and corrected the number. The message refers to nextents if the count is
wrong on the number of extents used to store attribute information.

entry name in dir dir_ino not consistent with .. value (xxxx) in dir ino ino, junking
entry name in directory inode dir_ino

The entry name in directory inode dir_ino references a directory inode ino.
However, the .. entry in directory ino does not point back to directory dir_ino, so
the program deletes the entry name in directory inode dir_ino. If the directory
inode ino winds up becoming a disconnected inode as a result of this, it is moved
to lost+found later.

entry name in dir dir_ino references already connected dir ino ino, junking entry name in
directory inode dir_ino

The entry name in directory inode dir_ino points to a directory inode ino that is
known to be a child of another directory. Therefore, the entry is invalid and is
deleted. This message refers to an entry in a small directory. If this were a
large directory, the last phrase would read "will clear entry".

entry references free inode ino in directory dir_ino, will clear entry

An entry in directory inode dir_ino references an inode ino that is known to be
free. The entry is therefore invalid and is deleted. This message refers to a
large directory. If the directory were small, the message would read "junking
entry ...".

EXIT STATUS

       xfs_repair -n (no modify node) will return a status of  1  if  filesystem  corruption  was
       detected  and  0  if no filesystem corruption was detected.  xfs_repair run without the -n
       option will always return a status code of 0.

BUGS

       The filesystem to be checked and repaired must have been unmounted  cleanly  using  normal
       system  administration  procedures  (the  umount(8)  command or system shutdown), not as a
       result of a crash or system reset.  If the filesystem  has  not  been  unmounted  cleanly,
       mount it and unmount it cleanly before running xfs_repair.

       xfs_repair  does  not  do a thorough job on XFS extended attributes.  The structure of the
       attribute fork will be consistent, but only the contents of attribute forks that will  fit
       into an inode are checked.  This limitation will be fixed in the future.

       The   no-modify  mode  (-n  option)  is  not  completely  accurate.   It  does  not  catch
       inconsistencies in the freespace and  inode  maps,  particularly  lost  blocks  or  subtly
       corrupted maps (trees).

       The  no-modify  mode  can  generate  repeated  warnings about the same problems because it
       cannot fix the problems as they are encountered.

       If  a  filesystem  fails  to  be  repaired,  a  metadump  image  can  be  generated   with
       xfs_metadump(8)  and  be  sent  to  an  XFS maintainer to be analysed and xfs_repair fixed
       and/or improved.