Provided by: mstflint_4.13.3+2-2_amd64 
NAME
mstflint - Flash Interface
DESCRIPTION
NAME mstflint - Flash Interface
SYNOPSIS
mstflint [OPTIONS] <command> [Parameters]
[-d|--device <device>] [-i|--image <image>] [--latest_fw] [--ir] [-h|--help] [--hh] [-y|--yes]
[--no] [--guid <GUID>] [--guids <GUIDS...>] [--mac <MAC>] [--macs <MACs...>] [--uid <UID>]
[--blank_guids] [--clear_semaphore] [--qq] [--low_cpu] [--flashed_version] [--nofs]
[--allow_rom_change] [--override_cache_replacement] [--no_flash_verify] [--use_fw] [-s|--silent]
[--vsd <string>] [--use_image_ps] [--use_image_guids] [--use_image_rom] [--use_dev_rom]
[--ignore_dev_data] [--no_fw_ctrl] [--dual_image] [--striped_image] [--banks <bank>] [--log
<log_file>] [--flash_params <type, log2size, num_of_flashes>] [-v|--version] [--private_key
<key_file>] [--key_uuid <uuid_file>] [--private_key2 <key_file>] [--hmac_key <hmac_key>]
[--key_uuid2 <uuid_file>]
DESCRIPTION
flint is a FW (firmware) burning and flash memory operations tool for Mellanox Infiniband
HCAs,Ethernet NIC cards, and switch devices.
OPTIONS
-d|--device <device>
Device flash is connected to. Commands affected: all
-i|--image <image>
Binary image file. Commands affected: burn, verify
--latest_fw
: Commands affected: burn
--ir : Commands affected: burn
-h|--help
Prints this message and exits
--hh Prints extended command help
-y|--yes
Non interactive mode - assume answer "yes" to all questions. Commands affected: all
--no Non interactive mode - assume answer "no" to all questions. Commands affected: all
--guid <GUID>
GUID base value. 4 GUIDs are automatically assigned to the following values:
guid -> node GUID
guid+1 -> port1
guid+2 -> port2 guid+3 -> system image GUID.
Note: port2 guid will be assigned even for a
single port HCA - The HCA ignores this value.
Commands affected: burn, sg
--guids <GUIDS...>
4 GUIDs must be specified here. The specified GUIDs are assigned to the following fields,
respectively: node, port1, port2 and system image GUID.
Note: port2 guid must be specified even for
a single port HCA - The HCA ignores this value. It can be set to 0x0.
Commands affected: burn, sg
--mac <MAC>
MAC address base value. 2 MACs are automatically assigned to the following values:
mac -> port1
mac+1 -> port2
Commands affected: burn, sg
--macs <MACs...>
2 MACs must be specified here. The specified MACs are assigned to port1, port2, respectively.
Commands affected: burn, sg
Note: -mac/-macs flags are applicable only
for Mellanox
Technologies ethernet products.
--uid <UID>
ConnectIB/SwitchIB only. Derive and set the device UIDs (GUIDs, MACs, WWNs). UIDs are derived
from the given base UID according to Mellanox Methodology Commands affected: burn, sg
--blank_guids
Burn the image with blank GUIDs and MACs (where applicable). These values can be set later using
the "sg" command (see details below).
Commands affected: burn
--clear_semaphore
Force clear the flash semaphore on the device. No command is allowed when this flag is used.
NOTE: May result in system instability or flash corruption if the device or another application is
currently using the flash. Exercise caution.
--qq Run a quick query. When specified, flint will not perform full image integrity checks during the
query operation. This may shorten execution time when running over slow interfaces (e.g., I2C,
MTUSB-1). Commands affected: query
--low_cpu
: When specified, cpu usage will be reduced. Run time might be increased Commands affected: query
--flashed_version
: When specified, only flashed fw version is fetched Commands affected: query
--nofs Burn image in a non failsafe manner.
--allow_rom_change
Allow burning/removing a ROM to/from FW image when product version is present. Use only if you
know what you are doing
--override_cache_replacement
On SwitchX/ConnectIB devices: Allow accessing the flash even if the cache replacement mode is
enabled. NOTE: This flag is intended for advanced users only. Running in this mode may cause the
firmware to hang.
--no_flash_verify
Do not verify each write on the flash.
--use_fw
Flash access will be done using FW (ConnectX-3/ConnectX-3Pro only).
-s|--silent
Do not print burn progress flyer. Commands affected: burn
--vsd <string>
Write this string, of up to 208 characters, to VSD when burn.
--use_image_ps
Burn vsd as appears in the given image - do not keep existing VSD on flash. Commands affected:
burn
--use_image_guids
Burn (guids/macs) as appears in the given image. Commands affected: burn
--use_image_rom
Do not save the ROM which exists in the device. Commands affected: burn
--use_dev_rom
Save the ROM which exists in the device. Commands affected: burn
--ignore_dev_data
Do not attempt to take device data sections from device(sections will be taken from the image. FS3
Only). Commands affected: burn
--no_fw_ctrl
Do not attempt to work with the FW Ctrl update commands
--dual_image
Make the burn process burn two images on flash (previously default algorithm). Current default
failsafe burn process burns a single image (in alternating locations). Commands affected: burn
--striped_image
Use this flag to indicate that the given image file is in a "striped image" format. Commands
affected: query verify
--banks <bank>
Set the number of attached flash devices (banks)
--log <log_file>
Print the burning status to the specified log file
--flash_params <type, log2size,
num_of_flashes>
Use the given parameters to access the flash
instead of reading them from the flash.
Supported parameters: Type: The type of the flash, such as:M25PXxx, M25Pxx, N25Q0XX, SST25VFxx,
W25QxxBV, W25Xxx, W25Qxxx, W25Qxxx, AT25DFxxx, S25FLXXXP, S25FL11xx, MX25L16xxx, MX25Lxxx,
S25FLxxx, IS25LPxxx. log2size: The log2 of the flash size.num_of_flashes: the number of the
flashes connected to the device.
-v|--version
Version info.
--private_key <key_file>
path to PEM formatted private key to be used by the sign command
--key_uuid <uuid_file>
UUID matching the given private key to be used by the sign command
--private_key2 <key_file>
path to PEM formatted private key to be used by the sign command
--hmac_key <hmac_key>
path to file containing key (For FS4 image only).
--key_uuid2 <uuid_file>
UUID matching the given private key to be used by the sign command
COMMANDS SUMMARY
burn|b -ir
Burn flash. Use "-ir burn" flag to perform
image reactivation prior burning.
query|q [full]
Query misc. flash/firmware characteristics,
use "full" to get more information.
verify|v [showitoc]
Verify entire flash, use "showitoc" to see
ITOC headers in FS3/FS4 image only.
swreset
SW reset the target switch device.This
command is supported only in the In-Band access method.
brom <ROM-file> : Burn the specified ROM file on the flash.
drom Remove the ROM section from the flash.
rrom <out-file> : Read the ROM section from the flash.
bb Burn Block - Burns the given image as is. No
checks are done.
sg [guids_num=<num|num_port1,num_port2>
step_size=<size|size_port1,size_port2>] | [nocrc] : Set
GUIDs. sv : Set the VSD. ri <out-file>
: Read the fw image on the flash. dc [out-file] : Dump
Configuration: print fw configuration
file for the given image.
dh [out-file] : Dump Hash: dump the hash if it is integrated
in the FW image
set_key
[key] : Set/Update the HW access key which is used to
enable/disable access to HW.
The key can be provided in the command line or interactively typed after the command is given
NOTE: The new key is activated only after the device is reset.
hw_access
<enable|disable> [key] : Enable/disable the access to the HW.
The key can be provided in the command line
or interactively typed after the command is given
hw query : Query HW info and flash attributes.
erase|e <addr>
Erases sector.
rw <addr> : Read one dword from flash
ww <addr> <data> : Write one dword to flash
wwne <addr> <data> : Write one dword to flash without sector
erase
wbne <addr> <size> <data ...> : Write a data block to flash without sector
erase.
wb <data-file> <addr> : Write a data block to flash.
rb <addr> <size> [out-file] : Read a data block from flash
clear_semaphore
Clear flash semaphore.
qrom query ROM image.
checksum|cs
perform MD5 checksum on FW.
timestamp|ts <set|query|reset> [timestamp] [FW version] : FW time
stamping. cache_image|ci : cache FW image(Windows only). sign
: Sign firmware image file sign_with_hmac : Sign image with HMAC
set_public_keys [public keys binary file] : Set Public Keys (For FS3/FS4 image only).
set_forbidden_versions [forbidden versions binary file] : Set
Forbidden Versions (For FS3/FS4 image
only).
image_reactivate|ir
: Reactivate previous flash image. For FW
controlled devices only.
binary_compare|bc
: Binary compare between device firmware and
given BIN file. If there is a silent mode, no progress is displayed.
RETURN VALUES
0 Successful completion.
1 An error has occurred.
7 For burn command - FW already updated - burn was aborted.
SEE ALSO
The full documentation for mstflint is maintained as a Texinfo manual. If the info and mstflint programs
are properly installed at your site, the command
info mstflint
should give you access to the complete manual.
mstflint, mstflint 4.13.3, built on Dec 30 2019, 1December 2019SHA Hash: N/A MSTFLINT,(1)