Provided by: weston_8.0.0-1_amd64 
NAME
weston.ini - configuration file for Weston - the reference Wayland compositor
INTRODUCTION
Weston obtains configuration from its command line parameters and the configuration file
described here.
DESCRIPTION
Weston uses a configuration file called weston.ini for its setup. The weston.ini
configuration file is searched for in one of the following places when the server is
started:
$XDG_CONFIG_HOME/weston.ini (if $XDG_CONFIG_HOME is set)
$HOME/.config/weston.ini (if $HOME is set)
weston/weston.ini in each
$XDG_CONFIG_DIR (if $XDG_CONFIG_DIRS is set)
/etc/xdg/weston/weston.ini (if $XDG_CONFIG_DIRS is not set)
where environment variable $HOME is the user's home directory, and $XDG_CONFIG_HOME is the
user specific configuration directory, and $XDG_CONFIG_DIRS is a colon ':' delimited
listed of configuration base directories, such as /etc/xdg-foo:/etc/xdg.
The weston.ini file is composed of a number of sections which may be present in any order,
or omitted to use default configuration values. Each section has the form:
[SectionHeader]
Key1=Value1
Key2=Value2
...
The spaces are significant. Comment lines are ignored:
#comment
The section headers are:
core The core modules and options
libinput Input device configuration
shell Desktop customization
launcher Add launcher to the panel
output Output configuration
input-method Onscreen keyboard input
keyboard Keyboard layouts
terminal Terminal application options
xwayland XWayland options
screen-share Screen sharing options
Possible value types are string, signed and unsigned 32-bit integer, and boolean. Strings
must not be quoted, do not support any escape sequences, and run till the end of the line.
Integers can be given in decimal (e.g. 123), octal (e.g. 0173), and hexadecimal (e.g.
0x7b) form. Boolean values can be only 'true' or 'false'.
CORE SECTION
The core section is used to select the startup compositor modules and general options.
shell=desktop-shell.so
specifies a shell to load (string). This can be used to load your own implemented
shell or one with Weston as default. Available shells in the /usr/lib/x86_64-linux-
gnu/weston directory are:
desktop-shell.so
xwayland=true
ask Weston to load the XWayland module (boolean).
modules=cms-colord.so,screen-share.so
specifies the modules to load (string). Available modules in the
/usr/lib/x86_64-linux-gnu/weston directory are:
cms-colord.so
screen-share.so
backend=headless-backend.so
overrides defaults backend. Available backend modules in the /usr/lib/x86_64-linux-
gnu/libweston-8 directory are:
drm-backend.so
fbdev-backend.so
headless-backend.so
rdp-backend.so
wayland-backend.so
x11-backend.so
repaint-window=N
Set the approximate length of the repaint window in milliseconds. The repaint
window is used to control and reduce the output latency for clients. If the window
is longer than the output refresh period, the repaint will be done immediately when
the previous repaint finishes, not processing client requests in between. If the
repaint window is too short, the compositor may miss the target vertical blank,
increasing output latency. The default value is 7 milliseconds. The allowed range
is from -10 to 1000 milliseconds. Using a negative value will force the compositor
to always miss the target vblank.
gbm-format=format
sets the GBM format used for the framebuffer for the GBM backend. Can be xrgb8888,
xrgb2101010, rgb565. By default, xrgb8888 is used.
idle-time=seconds
sets Weston's idle timeout in seconds. This idle timeout is the time after which
Weston will enter an "inactive" mode and screen will fade to black. A value of 0
disables the timeout.
Important : This option may also be set via Weston's '-i' command line option and
will take precedence over the current .ini option. This means that if both
weston.ini and command line define this idle-timeout time, the one specified in the
command-line will be used. On the other hand, if none of these sets the value,
default idle timeout will be set to 300 seconds.
require-input=true
require an input device for launch
pageflip-timeout=milliseconds
sets Weston's pageflip timeout in milliseconds. This sets a timer to exit
gracefully with a log message and an exit code of 1 in case the DRM driver is non-
responsive. Setting it to 0 disables this feature.
wait-for-debugger=true
Raises SIGSTOP before initializing the compositor. This allows the user to attach
with a debugger and continue execution by sending SIGCONT. This is useful for
debugging a crash on start-up when it would be inconvenient to launch weston
directly from a debugger. Boolean, defaults to false. There is also a command line
option to do the same.
remoting=remoting-plugin.so
specifies a plugin for remote output to load (string). This can be used to load
your own implemented remoting plugin or one with Weston as default. Available
remoting plugins in the __libweston_modules_dir__ directory are:
remoting-plugin.so
use-pixman=true
Enables pixman-based rendering for all outputs on backends that support it.
Boolean, defaults to false. There is also a command line option to do the same.
LIBINPUT SECTION
The libinput section is used to configure input devices when using the libinput input
device backend. The defaults are determined by libinput and vary according to what is most
sensible for any given device.
Available configuration are:
enable-tap=false
Enables tap to click on touchpad devices.
tap-and-drag=false
For touchpad devices with enable-tap enabled. If the user taps, then taps a second
time, this time holding, the virtual mouse button stays down for as long as the
user keeps their finger on the touchpad, allowing the user to click and drag with
taps alone.
tap-and-drag-lock=false
For touchpad devices with enable-tap and tap-and-drag enabled. In the middle of a
tap-and-drag, if the user releases the touchpad for less than a certain number of
milliseconds, then touches it again, the virtual mouse button will remain pressed
and the drag can continue.
disable-while-typing=true
For devices that may be accidentally triggered while typing on the keyboard,
causing a disruption of the typing. Disables them while the keyboard is in use.
middle-button-emulation=false
For pointer devices with left and right buttons, but no middle button. When
enabled, a middle button event is emitted when the left and right buttons are
pressed simultaneously.
left-handed=false
Configures the device for use by left-handed people. Exactly what this option does
depends on the device. For pointers with left and right buttons, the buttons are
swapped. On tablets, the tablet is logically turned upside down, because it will be
physically turned upside down.
rotation=n
Changes the direction of the logical north, rotating it n degrees clockwise away
from the default orientation, where n is a whole number between 0 and 359
inclusive. Needed for trackballs, mainly. Allows the user to orient the trackball
sideways, for example.
accel-profile={flat,adaptive}
Set the pointer acceleration profile. The pointer's screen speed is proportional to
the physical speed with a certain constant of proportionality. Call that constant
alpha. flat keeps alpha fixed. See accel-speed. adaptive causes alpha to increase
with physical speed, giving the user more control when the speed is slow, and more
reach when the speed is high. adaptive is the default.
accel-speed=v
If accel-profile is set to flat, it simply sets the value of alpha. If accel-
profile is set to adaptive, the effect is more complicated, but generally speaking,
it will change the pointer's speed. v is normalised and must lie in the range [-1,
1]. The exact mapping between v and alpha is hardware-dependent, but higher values
cause higher cursor speeds.
natural-scroll=false
Enables natural scrolling, mimicking the behaviour of touchscreen scrolling. That
is, if the wheel, finger, or fingers are moved down, the surface is scrolled up
instead of down, as if the finger, or fingers were in contact with the surface
being scrolled.
scroll-method={two-finger,edge,button,none}
Sets the scroll method. two-finger scrolls with two fingers on a touchpad. edge
scrolls with one finger on the right edge of a touchpad. button scrolls when the
pointer is moved while a certain button is pressed. See scroll-button. none
disables scrolling altogether.
scroll-button={BTN_LEFT,BTN_RIGHT,BTN_MIDDLE,...}
For devices with scroll-method set to button. Specifies the button that will
trigger scrolling. See /usr/include/linux/input-event-codes.h for the complete list
of possible values.
touchscreen_calibrator=true
Advertise the touchscreen calibrator interface to all clients. This is a potential
denial-of-service attack vector, so it should only be enabled on trusted userspace.
Boolean, defaults to false.
The interface is required for running touchscreen calibrator applications. It
provides the application raw touch events, bypassing the normal touch handling. It
also allows the application to upload a new calibration into the compositor.
Even though this option is listed in the libinput section, it does affect all
Weston configurations regardless of the used backend. If the backend does not use
libinput, the interface can still be advertised, but it will not list any devices.
calibration_helper=/bin/echo
An optional calibration helper program to permanently save a new touchscreen
calibration. String, defaults to unset.
The given program will be executed with seven arguments when a calibrator
application requests the server to take a new calibration matrix into use. The
program is executed synchronously and will therefore block Weston for its duration.
If the program exit status is non-zero, Weston will not apply the new calibration.
If the helper is unset or the program exit status is zero, Weston will use the new
calibration immediately.
The program is invoked as:
calibration_helper syspath m1 m2 m3 m4 m5 m6
where syspath is the udev sys path for the device and m1 through m6 are the
calibration matrix elements in libinput's LIBINPUT_CALIBRATION_MATRIX udev property
format. The sys path is an absolute path and starts with the sys mount point.
SHELL SECTION
The shell section is used to customize the compositor. Some keys may not be handled by
different shell plugins.
The entries that can appear in this section are:
client=file
sets the path for the shell client to run. If not specified weston-desktop-shell is
launched (string).
background-image=file
sets the path for the background image file (string).
background-type=tile
determines how the background image is drawn (string). Can be centered, scale,
scale-crop or tile (default). Centered shows the image once centered. If the image
is smaller than the output, the rest of the surface will be in background color. If
the image size does fit the output it will be cropped left and right, or top and
bottom. Scale means scaled to fit the output precisely, not preserving aspect
ratio. Scale-crop preserves aspect ratio, scales the background image just big
enough to cover the output, and centers it. The image ends up cropped from left and
right, or top and bottom, if the aspect ratio does not match the output. Tile
repeats the background image to fill the output.
background-color=0xAARRGGBB
sets the color of the background (unsigned integer). The hexadecimal digit pairs
are in order alpha, red, green, and blue.
clock-format=format
sets the panel clock format (string). Can be none, minutes, seconds. By default,
minutes format is used.
panel-color=0xAARRGGBB
sets the color of the panel (unsigned integer). The hexadecimal digit pairs are in
order transparency, red, green, and blue. Examples:
0xffff0000 Red
0xff00ff00 Green
0xff0000ff Blue
0x00ffffff Fully transparent
panel-position=top
sets the position of the panel (string). Can be top, bottom, left, right, none.
locking=true
enables screen locking (boolean).
animation=zoom
sets the effect used for opening new windows (string). Can be zoom, fade, none. By
default, no animation is used.
close-animation=fade
sets the effect used when closing windows (string). Can be fade, none. By default,
the fade animation is used.
startup-animation=fade
sets the effect used for opening new windows (string). Can be fade, none. By
default, the fade animation is used.
focus-animation=dim-layer
sets the effect used with the focused and unfocused windows. Can be dim-layer,
none. By default, no animation is used.
allow-zap=true
whether the shell should quit when the Ctrl-Alt-Backspace key combination is
pressed
binding-modifier=ctrl
sets the modifier key used for common bindings (string), such as moving surfaces,
resizing, rotating, switching, closing and setting the transparency for windows,
controlling the backlight and zooming the desktop. See weston-bindings(7).
Possible values: none, ctrl, alt, super (default)
num-workspaces=6
defines the number of workspaces (unsigned integer). The user can switch workspaces
by using the binding+F1, F2 keys. If this key is not set, fall back to one
workspace.
cursor-theme=theme
sets the cursor theme (string).
cursor-size=24
sets the cursor size (unsigned integer).
lockscreen-icon=path
sets the path to lock screen icon image (string). (tablet shell only)
lockscreen=path
sets the path to lock screen background image (string). (tablet shell only)
homescreen=path
sets the path to home screen background image (string). (tablet shell only)
LAUNCHER SECTION
There can be multiple launcher sections, one for each launcher.
icon=icon
sets the path to icon image (string). Svg images are not currently supported.
path=program
sets the path to the program that is run by clicking on this launcher (string). It
is possible to pass arguments and environment variables to the program. For
example:
path=GDK_BACKEND=wayland gnome-terminal --full-screen
OUTPUT SECTION
There can be multiple output sections, each corresponding to one output. It is currently
only recognized by the drm and x11 backends.
name=name
sets a name for the output (string). The backend uses the name to identify the
output. All X11 output names start with a letter X. All Wayland output names start
with the letters WL. The available output names for DRM backend are listed in the
weston-launch(1) output. Examples of usage:
LVDS1 DRM backend, Laptop internal panel no.1
VGA1 DRM backend, VGA connector no.1
X1 X11 backend, X window no.1
WL1 Wayland backend, Wayland window no.1
See weston-drm(7) for more details.
mode=mode
sets the output mode (string). The mode parameter is handled differently depending
on the backend. On the X11 backend, it just sets the WIDTHxHEIGHT of the weston
window. The DRM backend accepts different modes, along with an option of a
modeline string.
See weston-drm(7) for examples of modes-formats supported by DRM backend.
transform=normal
The transformation applied to screen output (string). The transform key can be one
of the following 8 strings:
normal Normal output.
90 90 degrees clockwise.
180 Upside down.
270 90 degrees counter clockwise.
flipped Horizontally flipped
flipped-90 Flipped and 90 degrees clockwise
flipped-180 Flipped upside down
flipped-270 Flipped and 90 degrees counter clockwise
scale=factor
The scaling multiplier applied to the entire output, in support of high resolution
("HiDPI" or "retina") displays, that roughly corresponds to the pixel ratio of the
display's physical resolution to the logical resolution. Applications that do not
support high resolution displays typically appear tiny and unreadable. Weston will
scale the output of such applications by this multiplier, to make them readable.
Applications that do support their own output scaling can draw their content in
high resolution, in which case they avoid compositor scaling. Weston will not scale
the output of such applications, and they are not affected by this multiplier.
An integer, 1 by default, typically configured as 2 or higher when needed, denoting
the scaling multiplier for the output.
seat=name
The logical seat name that this output should be associated with. If this is set
then the seat's input will be confined to the output that has the seat set on it.
The expectation is that this functionality will be used in a multiheaded
environment with a single compositor for multiple output and input configurations.
The default seat is called "default" and will always be present. This seat can be
constrained like any other.
allow_hdcp=true
Allows HDCP support for this output. If set to true, HDCP can be tried for the
content-protection, provided by the backends, on this output. By default, HDCP
support is always allowed for an output. The content-protection can actually be
realized, only if the hardware (source and sink) support HDCP, and the backend has
the implementation of content-protection protocol. Currently, HDCP is supported by
drm-backend.
INPUT-METHOD SECTION
path=/usr/lib/x86_64-linux-gnu/weston-keyboard
sets the path of the on screen keyboard input method (string).
KEYBOARD SECTION
This section contains the following keys:
keymap_rules=evdev
sets the keymap rules file (string). Used to map layout and model to input device.
keymap_model=pc105
sets the keymap model (string). See the Models section in xkeyboard-config(7).
keymap_layout=us,de,gb
sets the comma separated list of keyboard layout codes (string). See the Layouts
section in xkeyboard-config(7).
keymap_variant=euro,,intl
sets the comma separated list of keyboard layout variants (string). The number of
variants must be the same as the number of layouts above. See the Layouts section
in xkeyboard-config(7).
keymap_options=grp:alt_shift_toggle,grp_led:scroll
sets the keymap options (string). See the Options section in xkeyboard-config(7).
repeat-rate=40
sets the rate of repeating keys in characters per second (unsigned integer)
repeat-delay=400
sets the delay in milliseconds since key down until repeating starts (unsigned
integer)
numlock-on=false
sets the default state of the numlock on weston startup for the backends which
support it.
vt-switching=true
Whether to allow the use of Ctrl+Alt+Fn key combinations to switch away from the
compositor's virtual console.
TERMINAL SECTION
Contains settings for the weston terminal application (weston-terminal). It allows to
customize the font and shell of the command line interface.
font=DejaVu Sans Mono
sets the font of the terminal (string). For a good experience it is recommended to
use monospace fonts. In case the font is not found, the default one is used.
font-size=14
sets the size of the terminal font (unsigned integer).
term=xterm-256color
The terminal shell (string). Sets the $TERM variable.
XWAYLAND SECTION
path=/usr/bin/Xwayland
sets the path to the xserver to run (string).
SCREEN-SHARE SECTION
command=/usr/bin/weston --backend=rdp-backend.so --shell=fullscreen-shell.so --no-clients-
resize
sets the command to start a fullscreen-shell server for screen sharing (string).
SEE ALSO
weston(1), weston-bindings(7), weston-drm(7), xkeyboard-config(7)