Provided by: manpages_5.05-1_all 
NAME
mount_namespaces - overview of Linux mount namespaces
DESCRIPTION
For an overview of namespaces, see namespaces(7).
Mount namespaces provide isolation of the list of mount points seen by the processes in each namespace
instance. Thus, the processes in each of the mount namespace instances will see distinct single-
directory hierarchies.
The views provided by the /proc/[pid]/mounts, /proc/[pid]/mountinfo, and /proc/[pid]/mountstats files
(all described in proc(5)) correspond to the mount namespace in which the process with the PID [pid]
resides. (All of the processes that reside in the same mount namespace will see the same view in these
files.)
A new mount namespace is created using either clone(2) or unshare(2) with the CLONE_NEWNS flag. When a
new mount namespace is created, its mount point list is initialized as follows:
* If the namespace is created using clone(2), the mount point list of the child's namespace is a copy of
the mount point list in the parent's namespace.
* If the namespace is created using unshare(2), the mount point list of the new namespace is a copy of
the mount point list in the caller's previous mount namespace.
Subsequent modifications to the mount point list (mount(2) and umount(2)) in either mount namespace will
not (by default) affect the mount point list seen in the other namespace (but see the following
discussion of shared subtrees).
Restrictions on mount namespaces
Note the following points with respect to mount namespaces:
* Each mount namespace has an owner user namespace. As explained above, when a new mount namespace is
created, its mount point list is initialized as a copy of the mount point list of another mount
namespace. If the new namespace and the namespace from which the mount point list was copied are
owned by different user namespaces, then the new mount namespace is considered less privileged.
* When creating a less privileged mount namespace, shared mounts are reduced to slave mounts. (Shared
and slave mounts are discussed below.) This ensures that mappings performed in less privileged mount
namespaces will not propagate to more privileged mount namespaces.
* Mounts that come as a single unit from more privileged mount are locked together and may not be
separated in a less privileged mount namespace. (The unshare(2) CLONE_NEWNS operation brings across
all of the mounts from the original mount namespace as a single unit, and recursive mounts that
propagate between mount namespaces propagate as a single unit.)
* The mount(2) flags MS_RDONLY, MS_NOSUID, MS_NOEXEC, and the "atime" flags (MS_NOATIME, MS_NODIRATIME,
MS_RELATIME) settings become locked when propagated from a more privileged to a less privileged mount
namespace, and may not be changed in the less privileged mount namespace.
* A file or directory that is a mount point in one namespace that is not a mount point in another
namespace, may be renamed, unlinked, or removed (rmdir(2)) in the mount namespace in which it is not a
mount point (subject to the usual permission checks). Consequently, the mount point is removed in the
mount namespace where it was a mount point.
Previously (before Linux 3.18), attempting to unlink, rename, or remove a file or directory that was a
mount point in another mount namespace would result in the error EBUSY. That behavior had technical
problems of enforcement (e.g., for NFS) and permitted denial-of-service attacks against more
privileged users. (i.e., preventing individual files from being updated by bind mounting on top of
them).
SHARED SUBTREES
After the implementation of mount namespaces was completed, experience showed that the isolation that
they provided was, in some cases, too great. For example, in order to make a newly loaded optical disk
available in all mount namespaces, a mount operation was required in each namespace. For this use case,
and others, the shared subtree feature was introduced in Linux 2.6.15. This feature allows for
automatic, controlled propagation of mount and unmount events between namespaces (or, more precisely,
between the members of a peer group that are propagating events to one another).
Each mount point is marked (via mount(2)) as having one of the following propagation types:
MS_SHARED
This mount point shares events with members of a peer group. Mount and unmount events immediately
under this mount point will propagate to the other mount points that are members of the peer
group. Propagation here means that the same mount or unmount will automatically occur under all
of the other mount points in the peer group. Conversely, mount and unmount events that take place
under peer mount points will propagate to this mount point.
MS_PRIVATE
This mount point is private; it does not have a peer group. Mount and unmount events do not
propagate into or out of this mount point.
MS_SLAVE
Mount and unmount events propagate into this mount point from a (master) shared peer group. Mount
and unmount events under this mount point do not propagate to any peer.
Note that a mount point can be the slave of another peer group while at the same time sharing
mount and unmount events with a peer group of which it is a member. (More precisely, one peer
group can be the slave of another peer group.)
MS_UNBINDABLE
This is like a private mount, and in addition this mount can't be bind mounted. Attempts to bind
mount this mount (mount(2) with the MS_BIND flag) will fail.
When a recursive bind mount (mount(2) with the MS_BIND and MS_REC flags) is performed on a
directory subtree, any bind mounts within the subtree are automatically pruned (i.e., not
replicated) when replicating that subtree to produce the target subtree.
For a discussion of the propagation type assigned to a new mount, see NOTES.
The propagation type is a per-mount-point setting; some mount points may be marked as shared (with each
shared mount point being a member of a distinct peer group), while others are private (or slaved or
unbindable).
Note that a mount's propagation type determines whether mounts and unmounts of mount points immediately
under the mount point are propagated. Thus, the propagation type does not affect propagation of events
for grandchildren and further removed descendant mount points. What happens if the mount point itself is
unmounted is determined by the propagation type that is in effect for the parent of the mount point.
Members are added to a peer group when a mount point is marked as shared and either:
* the mount point is replicated during the creation of a new mount namespace; or
* a new bind mount is created from the mount point.
In both of these cases, the new mount point joins the peer group of which the existing mount point is a
member.
A new peer group is also created when a child mount point is created under an existing mount point that
is marked as shared. In this case, the new child mount point is also marked as shared and the resulting
peer group consists of all the mount points that are replicated under the peers of parent mount.
A mount ceases to be a member of a peer group when either the mount is explicitly unmounted, or when the
mount is implicitly unmounted because a mount namespace is removed (because it has no more member
processes).
The propagation type of the mount points in a mount namespace can be discovered via the "optional fields"
exposed in /proc/[pid]/mountinfo. (See proc(5) for details of this file.) The following tags can appear
in the optional fields for a record in that file:
shared:X
This mount point is shared in peer group X. Each peer group has a unique ID that is automatically
generated by the kernel, and all mount points in the same peer group will show the same ID.
(These IDs are assigned starting from the value 1, and may be recycled when a peer group ceases to
have any members.)
master:X
This mount is a slave to shared peer group X.
propagate_from:X (since Linux 2.6.26)
This mount is a slave and receives propagation from shared peer group X. This tag will always
appear in conjunction with a master:X tag. Here, X is the closest dominant peer group under the
process's root directory. If X is the immediate master of the mount, or if there is no dominant
peer group under the same root, then only the master:X field is present and not the
propagate_from:X field. For further details, see below.
unbindable
This is an unbindable mount.
If none of the above tags is present, then this is a private mount.
MS_SHARED and MS_PRIVATE example
Suppose that on a terminal in the initial mount namespace, we mark one mount point as shared and another
as private, and then view the mounts in /proc/self/mountinfo:
sh1# mount --make-shared /mntS
sh1# mount --make-private /mntP
sh1# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
77 61 8:17 / /mntS rw,relatime shared:1
83 61 8:15 / /mntP rw,relatime
From the /proc/self/mountinfo output, we see that /mntS is a shared mount in peer group 1, and that /mntP
has no optional tags, indicating that it is a private mount. The first two fields in each record in this
file are the unique ID for this mount, and the mount ID of the parent mount. We can further inspect this
file to see that the parent mount point of /mntS and /mntP is the root directory, /, which is mounted as
private:
sh1# cat /proc/self/mountinfo | awk '$1 == 61' | sed 's/ - .*//'
61 0 8:2 / / rw,relatime
On a second terminal, we create a new mount namespace where we run a second shell and inspect the mounts:
$ PS1='sh2# ' sudo unshare -m --propagation unchanged sh
sh2# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
222 145 8:17 / /mntS rw,relatime shared:1
225 145 8:15 / /mntP rw,relatime
The new mount namespace received a copy of the initial mount namespace's mount points. These new mount
points maintain the same propagation types, but have unique mount IDs. (The --propagation unchanged
option prevents unshare(1) from marking all mounts as private when creating a new mount namespace, which
it does by default.)
In the second terminal, we then create submounts under each of /mntS and /mntP and inspect the set-up:
sh2# mkdir /mntS/a
sh2# mount /dev/sdb6 /mntS/a
sh2# mkdir /mntP/b
sh2# mount /dev/sdb7 /mntP/b
sh2# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
222 145 8:17 / /mntS rw,relatime shared:1
225 145 8:15 / /mntP rw,relatime
178 222 8:22 / /mntS/a rw,relatime shared:2
230 225 8:23 / /mntP/b rw,relatime
From the above, it can be seen that /mntS/a was created as shared (inheriting this setting from its
parent mount) and /mntP/b was created as a private mount.
Returning to the first terminal and inspecting the set-up, we see that the new mount created under the
shared mount point /mntS propagated to its peer mount (in the initial mount namespace), but the new mount
created under the private mount point /mntP did not propagate:
sh1# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
77 61 8:17 / /mntS rw,relatime shared:1
83 61 8:15 / /mntP rw,relatime
179 77 8:22 / /mntS/a rw,relatime shared:2
MS_SLAVE example
Making a mount point a slave allows it to receive propagated mount and unmount events from a master
shared peer group, while preventing it from propagating events to that master. This is useful if we want
to (say) receive a mount event when an optical disk is mounted in the master shared peer group (in
another mount namespace), but want to prevent mount and unmount events under the slave mount from having
side effects in other namespaces.
We can demonstrate the effect of slaving by first marking two mount points as shared in the initial mount
namespace:
sh1# mount --make-shared /mntX
sh1# mount --make-shared /mntY
sh1# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
132 83 8:23 / /mntX rw,relatime shared:1
133 83 8:22 / /mntY rw,relatime shared:2
On a second terminal, we create a new mount namespace and inspect the mount points:
sh2# unshare -m --propagation unchanged sh
sh2# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
168 167 8:23 / /mntX rw,relatime shared:1
169 167 8:22 / /mntY rw,relatime shared:2
In the new mount namespace, we then mark one of the mount points as a slave:
sh2# mount --make-slave /mntY
sh2# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
168 167 8:23 / /mntX rw,relatime shared:1
169 167 8:22 / /mntY rw,relatime master:2
From the above output, we see that /mntY is now a slave mount that is receiving propagation events from
the shared peer group with the ID 2.
Continuing in the new namespace, we create submounts under each of /mntX and /mntY:
sh2# mkdir /mntX/a
sh2# mount /dev/sda3 /mntX/a
sh2# mkdir /mntY/b
sh2# mount /dev/sda5 /mntY/b
When we inspect the state of the mount points in the new mount namespace, we see that /mntX/a was created
as a new shared mount (inheriting the "shared" setting from its parent mount) and /mntY/b was created as
a private mount:
sh2# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
168 167 8:23 / /mntX rw,relatime shared:1
169 167 8:22 / /mntY rw,relatime master:2
173 168 8:3 / /mntX/a rw,relatime shared:3
175 169 8:5 / /mntY/b rw,relatime
Returning to the first terminal (in the initial mount namespace), we see that the mount /mntX/a
propagated to the peer (the shared /mntX), but the mount /mntY/b was not propagated:
sh1# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
132 83 8:23 / /mntX rw,relatime shared:1
133 83 8:22 / /mntY rw,relatime shared:2
174 132 8:3 / /mntX/a rw,relatime shared:3
Now we create a new mount point under /mntY in the first shell:
sh1# mkdir /mntY/c
sh1# mount /dev/sda1 /mntY/c
sh1# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
132 83 8:23 / /mntX rw,relatime shared:1
133 83 8:22 / /mntY rw,relatime shared:2
174 132 8:3 / /mntX/a rw,relatime shared:3
178 133 8:1 / /mntY/c rw,relatime shared:4
When we examine the mount points in the second mount namespace, we see that in this case the new mount
has been propagated to the slave mount point, and that the new mount is itself a slave mount (to peer
group 4):
sh2# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
168 167 8:23 / /mntX rw,relatime shared:1
169 167 8:22 / /mntY rw,relatime master:2
173 168 8:3 / /mntX/a rw,relatime shared:3
175 169 8:5 / /mntY/b rw,relatime
179 169 8:1 / /mntY/c rw,relatime master:4
MS_UNBINDABLE example
One of the primary purposes of unbindable mounts is to avoid the "mount point explosion" problem when
repeatedly performing bind mounts of a higher-level subtree at a lower-level mount point. The problem is
illustrated by the following shell session.
Suppose we have a system with the following mount points:
# mount | awk '{print $1, $2, $3}'
/dev/sda1 on /
/dev/sdb6 on /mntX
/dev/sdb7 on /mntY
Suppose furthermore that we wish to recursively bind mount the root directory under several users' home
directories. We do this for the first user, and inspect the mount points:
# mount --rbind / /home/cecilia/
# mount | awk '{print $1, $2, $3}'
/dev/sda1 on /
/dev/sdb6 on /mntX
/dev/sdb7 on /mntY
/dev/sda1 on /home/cecilia
/dev/sdb6 on /home/cecilia/mntX
/dev/sdb7 on /home/cecilia/mntY
When we repeat this operation for the second user, we start to see the explosion problem:
# mount --rbind / /home/henry
# mount | awk '{print $1, $2, $3}'
/dev/sda1 on /
/dev/sdb6 on /mntX
/dev/sdb7 on /mntY
/dev/sda1 on /home/cecilia
/dev/sdb6 on /home/cecilia/mntX
/dev/sdb7 on /home/cecilia/mntY
/dev/sda1 on /home/henry
/dev/sdb6 on /home/henry/mntX
/dev/sdb7 on /home/henry/mntY
/dev/sda1 on /home/henry/home/cecilia
/dev/sdb6 on /home/henry/home/cecilia/mntX
/dev/sdb7 on /home/henry/home/cecilia/mntY
Under /home/henry, we have not only recursively added the /mntX and /mntY mounts, but also the recursive
mounts of those directories under /home/cecilia that were created in the previous step. Upon repeating
the step for a third user, it becomes obvious that the explosion is exponential in nature:
# mount --rbind / /home/otto
# mount | awk '{print $1, $2, $3}'
/dev/sda1 on /
/dev/sdb6 on /mntX
/dev/sdb7 on /mntY
/dev/sda1 on /home/cecilia
/dev/sdb6 on /home/cecilia/mntX
/dev/sdb7 on /home/cecilia/mntY
/dev/sda1 on /home/henry
/dev/sdb6 on /home/henry/mntX
/dev/sdb7 on /home/henry/mntY
/dev/sda1 on /home/henry/home/cecilia
/dev/sdb6 on /home/henry/home/cecilia/mntX
/dev/sdb7 on /home/henry/home/cecilia/mntY
/dev/sda1 on /home/otto
/dev/sdb6 on /home/otto/mntX
/dev/sdb7 on /home/otto/mntY
/dev/sda1 on /home/otto/home/cecilia
/dev/sdb6 on /home/otto/home/cecilia/mntX
/dev/sdb7 on /home/otto/home/cecilia/mntY
/dev/sda1 on /home/otto/home/henry
/dev/sdb6 on /home/otto/home/henry/mntX
/dev/sdb7 on /home/otto/home/henry/mntY
/dev/sda1 on /home/otto/home/henry/home/cecilia
/dev/sdb6 on /home/otto/home/henry/home/cecilia/mntX
/dev/sdb7 on /home/otto/home/henry/home/cecilia/mntY
The mount explosion problem in the above scenario can be avoided by making each of the new mounts
unbindable. The effect of doing this is that recursive mounts of the root directory will not replicate
the unbindable mounts. We make such a mount for the first user:
# mount --rbind --make-unbindable / /home/cecilia
Before going further, we show that unbindable mounts are indeed unbindable:
# mkdir /mntZ
# mount --bind /home/cecilia /mntZ
mount: wrong fs type, bad option, bad superblock on /home/cecilia,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
Now we create unbindable recursive bind mounts for the other two users:
# mount --rbind --make-unbindable / /home/henry
# mount --rbind --make-unbindable / /home/otto
Upon examining the list of mount points, we see there has been no explosion of mount points, because the
unbindable mounts were not replicated under each user's directory:
# mount | awk '{print $1, $2, $3}'
/dev/sda1 on /
/dev/sdb6 on /mntX
/dev/sdb7 on /mntY
/dev/sda1 on /home/cecilia
/dev/sdb6 on /home/cecilia/mntX
/dev/sdb7 on /home/cecilia/mntY
/dev/sda1 on /home/henry
/dev/sdb6 on /home/henry/mntX
/dev/sdb7 on /home/henry/mntY
/dev/sda1 on /home/otto
/dev/sdb6 on /home/otto/mntX
/dev/sdb7 on /home/otto/mntY
Propagation type transitions
The following table shows the effect that applying a new propagation type (i.e., mount --make-xxxx) has
on the existing propagation type of a mount point. The rows correspond to existing propagation types,
and the columns are the new propagation settings. For reasons of space, "private" is abbreviated as
"priv" and "unbindable" as "unbind".
make-shared make-slave make-priv make-unbind
shared shared slave/priv [1] priv unbind
slave slave+shared slave [2] priv unbind
slave+shared slave+shared slave priv unbind
private shared priv [2] priv unbind
unbindable shared unbind [2] priv unbind
Note the following details to the table:
[1] If a shared mount is the only mount in its peer group, making it a slave automatically makes it
private.
[2] Slaving a nonshared mount has no effect on the mount.
Bind (MS_BIND) semantics
Suppose that the following command is performed:
mount --bind A/a B/b
Here, A is the source mount point, B is the destination mount point, a is a subdirectory path under the
mount point A, and b is a subdirectory path under the mount point B. The propagation type of the
resulting mount, B/b, depends on the propagation types of the mount points A and B, and is summarized in
the following table.
source(A)
shared private slave unbind
───────────────────────────────────────────────────────────────
dest(B) shared | shared shared slave+shared invalid
nonshared | shared private slave invalid
Note that a recursive bind of a subtree follows the same semantics as for a bind operation on each mount
in the subtree. (Unbindable mounts are automatically pruned at the target mount point.)
For further details, see Documentation/filesystems/sharedsubtree.txt in the kernel source tree.
Move (MS_MOVE) semantics
Suppose that the following command is performed:
mount --move A B/b
Here, A is the source mount point, B is the destination mount point, and b is a subdirectory path under
the mount point B. The propagation type of the resulting mount, B/b, depends on the propagation types of
the mount points A and B, and is summarized in the following table.
source(A)
shared private slave unbind
──────────────────────────────────────────────────────────────────
dest(B) shared | shared shared slave+shared invalid
nonshared | shared private slave unbindable
Note: moving a mount that resides under a shared mount is invalid.
For further details, see Documentation/filesystems/sharedsubtree.txt in the kernel source tree.
Mount semantics
Suppose that we use the following command to create a mount point:
mount device B/b
Here, B is the destination mount point, and b is a subdirectory path under the mount point B. The
propagation type of the resulting mount, B/b, follows the same rules as for a bind mount, where the
propagation type of the source mount is considered always to be private.
Unmount semantics
Suppose that we use the following command to tear down a mount point:
unmount A
Here, A is a mount point on B/b, where B is the parent mount and b is a subdirectory path under the mount
point B. If B is shared, then all most-recently-mounted mounts at b on mounts that receive propagation
from mount B and do not have submounts under them are unmounted.
The /proc/[pid]/mountinfo propagate_from tag
The propagate_from:X tag is shown in the optional fields of a /proc/[pid]/mountinfo record in cases where
a process can't see a slave's immediate master (i.e., the pathname of the master is not reachable from
the filesystem root directory) and so cannot determine the chain of propagation between the mounts it can
see.
In the following example, we first create a two-link master-slave chain between the mounts /mnt,
/tmp/etc, and /mnt/tmp/etc. Then the chroot(1) command is used to make the /tmp/etc mount point
unreachable from the root directory, creating a situation where the master of /mnt/tmp/etc is not
reachable from the (new) root directory of the process.
First, we bind mount the root directory onto /mnt and then bind mount /proc at /mnt/proc so that after
the later chroot(1) the proc(5) filesystem remains visible at the correct location in the chroot-ed
environment.
# mkdir -p /mnt/proc
# mount --bind / /mnt
# mount --bind /proc /mnt/proc
Next, we ensure that the /mnt mount is a shared mount in a new peer group (with no peers):
# mount --make-private /mnt # Isolate from any previous peer group
# mount --make-shared /mnt
# cat /proc/self/mountinfo | grep '/mnt' | sed 's/ - .*//'
239 61 8:2 / /mnt ... shared:102
248 239 0:4 / /mnt/proc ... shared:5
Next, we bind mount /mnt/etc onto /tmp/etc:
# mkdir -p /tmp/etc
# mount --bind /mnt/etc /tmp/etc
# cat /proc/self/mountinfo | egrep '/mnt|/tmp/' | sed 's/ - .*//'
239 61 8:2 / /mnt ... shared:102
248 239 0:4 / /mnt/proc ... shared:5
267 40 8:2 /etc /tmp/etc ... shared:102
Initially, these two mount points are in the same peer group, but we then make the /tmp/etc a slave of
/mnt/etc, and then make /tmp/etc shared as well, so that it can propagate events to the next slave in the
chain:
# mount --make-slave /tmp/etc
# mount --make-shared /tmp/etc
# cat /proc/self/mountinfo | egrep '/mnt|/tmp/' | sed 's/ - .*//'
239 61 8:2 / /mnt ... shared:102
248 239 0:4 / /mnt/proc ... shared:5
267 40 8:2 /etc /tmp/etc ... shared:105 master:102
Then we bind mount /tmp/etc onto /mnt/tmp/etc. Again, the two mount points are initially in the same
peer group, but we then make /mnt/tmp/etc a slave of /tmp/etc:
# mkdir -p /mnt/tmp/etc
# mount --bind /tmp/etc /mnt/tmp/etc
# mount --make-slave /mnt/tmp/etc
# cat /proc/self/mountinfo | egrep '/mnt|/tmp/' | sed 's/ - .*//'
239 61 8:2 / /mnt ... shared:102
248 239 0:4 / /mnt/proc ... shared:5
267 40 8:2 /etc /tmp/etc ... shared:105 master:102
273 239 8:2 /etc /mnt/tmp/etc ... master:105
From the above, we see that /mnt is the master of the slave /tmp/etc, which in turn is the master of the
slave /mnt/tmp/etc.
We then chroot(1) to the /mnt directory, which renders the mount with ID 267 unreachable from the (new)
root directory:
# chroot /mnt
When we examine the state of the mounts inside the chroot-ed environment, we see the following:
# cat /proc/self/mountinfo | sed 's/ - .*//'
239 61 8:2 / / ... shared:102
248 239 0:4 / /proc ... shared:5
273 239 8:2 /etc /tmp/etc ... master:105 propagate_from:102
Above, we see that the mount with ID 273 is a slave whose master is the peer group 105. The mount point
for that master is unreachable, and so a propagate_from tag is displayed, indicating that the closest
dominant peer group (i.e., the nearest reachable mount in the slave chain) is the peer group with the ID
102 (corresponding to the /mnt mount point before the chroot(1) was performed.
VERSIONS
Mount namespaces first appeared in Linux 2.4.19.
CONFORMING TO
Namespaces are a Linux-specific feature.
NOTES
The propagation type assigned to a new mount point depends on the propagation type of the parent mount.
If the mount point has a parent (i.e., it is a non-root mount point) and the propagation type of the
parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the
propagation type of the new mount is MS_PRIVATE.
Notwithstanding the fact that the default propagation type for new mount points is in many cases
MS_PRIVATE, MS_SHARED is typically more useful. For this reason, systemd(1) automatically remounts all
mount points as MS_SHARED on system startup. Thus, on most modern systems, the default propagation type
is in practice MS_SHARED.
Since, when one uses unshare(1) to create a mount namespace, the goal is commonly to provide full
isolation of the mount points in the new namespace, unshare(1) (since util-linux version 2.27) in turn
reverses the step performed by systemd(1), by making all mount points private in the new namespace. That
is, unshare(1) performs the equivalent of the following in the new mount namespace:
mount --make-rprivate /
To prevent this, one can use the --propagation unchanged option to unshare(1).
An application that creates a new mount namespace directly using clone(2) or unshare(2) may desire to
prevent propagation of mount events to other mount namespaces (as is done by unshare(1)). This can be
done by changing the propagation type of mount points in the new namespace to either MS_SLAVE or
MS_PRIVATE. using a call such as the following:
mount(NULL, "/", MS_SLAVE | MS_REC, NULL);
For a discussion of propagation types when moving mounts (MS_MOVE) and creating bind mounts (MS_BIND),
see Documentation/filesystems/sharedsubtree.txt.
EXAMPLE
See pivot_root(2).
SEE ALSO
unshare(1), clone(2), mount(2), pivot_root(2), setns(2), umount(2), unshare(2), proc(5), namespaces(7),
user_namespaces(7), findmnt(8), pivot_root(8)
Documentation/filesystems/sharedsubtree.txt in the kernel source tree.
COLOPHON
This page is part of release 5.05 of the Linux man-pages project. A description of the project,
information about reporting bugs, and the latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2019-08-02 MOUNT_NAMESPACES(7)