Provided by: ovn-common_20.03.2-0ubuntu0.20.04.6_amd64 
NAME
ovn-architecture - Open Virtual Network architecture
DESCRIPTION
OVN, the Open Virtual Network, is a system to support virtual network abstraction. OVN complements the
existing capabilities of OVS to add native support for virtual network abstractions, such as virtual L2
and L3 overlays and security groups. Services such as DHCP are also desirable features. Just like OVS,
OVN’s design goal is to have a production-quality implementation that can operate at significant scale.
An OVN deployment consists of several components:
• A Cloud Management System (CMS), which is OVN’s ultimate client (via its users and
administrators). OVN integration requires installing a CMS-specific plugin and related
software (see below). OVN initially targets OpenStack as CMS.
We generally speak of ``the’’ CMS, but one can imagine scenarios in which multiple CMSes
manage different parts of an OVN deployment.
• An OVN Database physical or virtual node (or, eventually, cluster) installed in a central
location.
• One or more (usually many) hypervisors. Hypervisors must run Open vSwitch and implement the
interface described in IntegrationGuide.rst in the OVS source tree. Any hypervisor platform
supported by Open vSwitch is acceptable.
• Zero or more gateways. A gateway extends a tunnel-based logical network into a physical
network by bidirectionally forwarding packets between tunnels and a physical Ethernet port.
This allows non-virtualized machines to participate in logical networks. A gateway may be a
physical host, a virtual machine, or an ASIC-based hardware switch that supports the
vtep(5) schema.
Hypervisors and gateways are together called transport node or chassis.
The diagram below shows how the major components of OVN and related software interact. Starting at the
top of the diagram, we have:
• The Cloud Management System, as defined above.
• The OVN/CMS Plugin is the component of the CMS that interfaces to OVN. In OpenStack, this
is a Neutron plugin. The plugin’s main purpose is to translate the CMS’s notion of logical
network configuration, stored in the CMS’s configuration database in a CMS-specific format,
into an intermediate representation understood by OVN.
This component is necessarily CMS-specific, so a new plugin needs to be developed for each
CMS that is integrated with OVN. All of the components below this one in the diagram are
CMS-independent.
• The OVN Northbound Database receives the intermediate representation of logical network
configuration passed down by the OVN/CMS Plugin. The database schema is meant to be
``impedance matched’’ with the concepts used in a CMS, so that it directly supports notions
of logical switches, routers, ACLs, and so on. See ovn-nb(5) for details.
The OVN Northbound Database has only two clients: the OVN/CMS Plugin above it and
ovn-northd below it.
• ovn-northd(8) connects to the OVN Northbound Database above it and the OVN Southbound
Database below it. It translates the logical network configuration in terms of conventional
network concepts, taken from the OVN Northbound Database, into logical datapath flows in
the OVN Southbound Database below it.
• The OVN Southbound Database is the center of the system. Its clients are ovn-northd(8)
above it and ovn-controller(8) on every transport node below it.
The OVN Southbound Database contains three kinds of data: Physical Network (PN) tables that
specify how to reach hypervisor and other nodes, Logical Network (LN) tables that describe
the logical network in terms of ``logical datapath flows,’’ and Binding tables that link
logical network components’ locations to the physical network. The hypervisors populate the
PN and Port_Binding tables, whereas ovn-northd(8) populates the LN tables.
OVN Southbound Database performance must scale with the number of transport nodes. This
will likely require some work on ovsdb-server(1) as we encounter bottlenecks. Clustering
for availability may be needed.
The remaining components are replicated onto each hypervisor:
• ovn-controller(8) is OVN’s agent on each hypervisor and software gateway. Northbound, it
connects to the OVN Southbound Database to learn about OVN configuration and status and to
populate the PN table and the Chassis column in Binding table with the hypervisor’s status.
Southbound, it connects to ovs-vswitchd(8) as an OpenFlow controller, for control over
network traffic, and to the local ovsdb-server(1) to allow it to monitor and control Open
vSwitch configuration.
• ovs-vswitchd(8) and ovsdb-server(1) are conventional components of Open vSwitch.
CMS
|
|
+-----------|-----------+
| | |
| OVN/CMS Plugin |
| | |
| | |
| OVN Northbound DB |
| | |
| | |
| ovn-northd |
| | |
+-----------|-----------+
|
|
+-------------------+
| OVN Southbound DB |
+-------------------+
|
|
+------------------+------------------+
| | |
HV 1 | | HV n |
+---------------|---------------+ . +---------------|---------------+
| | | . | | |
| ovn-controller | . | ovn-controller |
| | | | . | | | |
| | | | | | | |
| ovs-vswitchd ovsdb-server | | ovs-vswitchd ovsdb-server |
| | | |
+-------------------------------+ +-------------------------------+
Information Flow in OVN
Configuration data in OVN flows from north to south. The CMS, through its OVN/CMS plugin, passes the
logical network configuration to ovn-northd via the northbound database. In turn, ovn-northd compiles the
configuration into a lower-level form and passes it to all of the chassis via the southbound database.
Status information in OVN flows from south to north. OVN currently provides only a few forms of status
information. First, ovn-northd populates the up column in the northbound Logical_Switch_Port table: if a
logical port’s chassis column in the southbound Port_Binding table is nonempty, it sets up to true,
otherwise to false. This allows the CMS to detect when a VM’s networking has come up.
Second, OVN provides feedback to the CMS on the realization of its configuration, that is, whether the
configuration provided by the CMS has taken effect. This feature requires the CMS to participate in a
sequence number protocol, which works the following way:
1. When the CMS updates the configuration in the northbound database, as part of the same
transaction, it increments the value of the nb_cfg column in the NB_Global table. (This is
only necessary if the CMS wants to know when the configuration has been realized.)
2. When ovn-northd updates the southbound database based on a given snapshot of the northbound
database, it copies nb_cfg from northbound NB_Global into the southbound database SB_Global
table, as part of the same transaction. (Thus, an observer monitoring both databases can
determine when the southbound database is caught up with the northbound.)
3. After ovn-northd receives confirmation from the southbound database server that its changes
have committed, it updates sb_cfg in the northbound NB_Global table to the nb_cfg version that
was pushed down. (Thus, the CMS or another observer can determine when the southbound database
is caught up without a connection to the southbound database.)
4. The ovn-controller process on each chassis receives the updated southbound database, with the
updated nb_cfg. This process in turn updates the physical flows installed in the chassis’s
Open vSwitch instances. When it receives confirmation from Open vSwitch that the physical
flows have been updated, it updates nb_cfg in its own Chassis record in the southbound
database.
5. ovn-northd monitors the nb_cfg column in all of the Chassis records in the southbound
database. It keeps track of the minimum value among all the records and copies it into the
hv_cfg column in the northbound NB_Global table. (Thus, the CMS or another observer can
determine when all of the hypervisors have caught up to the northbound configuration.)
Chassis Setup
Each chassis in an OVN deployment must be configured with an Open vSwitch bridge dedicated for OVN’s use,
called the integration bridge. System startup scripts may create this bridge prior to starting
ovn-controller if desired. If this bridge does not exist when ovn-controller starts, it will be created
automatically with the default configuration suggested below. The ports on the integration bridge
include:
• On any chassis, tunnel ports that OVN uses to maintain logical network connectivity.
ovn-controller adds, updates, and removes these tunnel ports.
• On a hypervisor, any VIFs that are to be attached to logical networks. The hypervisor
itself, or the integration between Open vSwitch and the hypervisor (described in
IntegrationGuide.rst) takes care of this. (This is not part of OVN or new to OVN; this is
pre-existing integration work that has already been done on hypervisors that support OVS.)
• On a gateway, the physical port used for logical network connectivity. System startup
scripts add this port to the bridge prior to starting ovn-controller. This can be a patch
port to another bridge, instead of a physical port, in more sophisticated setups.
Other ports should not be attached to the integration bridge. In particular, physical ports attached to
the underlay network (as opposed to gateway ports, which are physical ports attached to logical networks)
must not be attached to the integration bridge. Underlay physical ports should instead be attached to a
separate Open vSwitch bridge (they need not be attached to any bridge at all, in fact).
The integration bridge should be configured as described below. The effect of each of these settings is
documented in ovs-vswitchd.conf.db(5):
fail-mode=secure
Avoids switching packets between isolated logical networks before ovn-controller starts up.
See Controller Failure Settings in ovs-vsctl(8) for more information.
other-config:disable-in-band=true
Suppresses in-band control flows for the integration bridge. It would be unusual for such
flows to show up anyway, because OVN uses a local controller (over a Unix domain socket)
instead of a remote controller. It’s possible, however, for some other bridge in the same
system to have an in-band remote controller, and in that case this suppresses the flows
that in-band control would ordinarily set up. Refer to the documentation for more
information.
The customary name for the integration bridge is br-int, but another name may be used.
Logical Networks
A logical network implements the same concepts as physical networks, but they are insulated from the
physical network with tunnels or other encapsulations. This allows logical networks to have separate IP
and other address spaces that overlap, without conflicting, with those used for physical networks.
Logical network topologies can be arranged without regard for the topologies of the physical networks on
which they run.
Logical network concepts in OVN include:
• Logical switches, the logical version of Ethernet switches.
• Logical routers, the logical version of IP routers. Logical switches and routers can be
connected into sophisticated topologies.
• Logical datapaths are the logical version of an OpenFlow switch. Logical switches and
routers are both implemented as logical datapaths.
• Logical ports represent the points of connectivity in and out of logical switches and
logical routers. Some common types of logical ports are:
• Logical ports representing VIFs.
• Localnet ports represent the points of connectivity between logical switches and the
physical network. They are implemented as OVS patch ports between the integration
bridge and the separate Open vSwitch bridge that underlay physical ports attach to.
• Logical patch ports represent the points of connectivity between logical switches
and logical routers, and in some cases between peer logical routers. There is a pair
of logical patch ports at each such point of connectivity, one on each side.
• Localport ports represent the points of local connectivity between logical switches
and VIFs. These ports are present in every chassis (not bound to any particular one)
and traffic from them will never go through a tunnel. A localport is expected to
only generate traffic destined for a local destination, typically in response to a
request it received. One use case is how OpenStack Neutron uses a localport port for
serving metadata to VM’s residing on every hypervisor. A metadata proxy process is
attached to this port on every host and all VM’s within the same network will reach
it at the same IP/MAC address without any traffic being sent over a tunnel. Further
details can be seen at https://docs.openstack.org/developer/networking-
ovn/design/metadata_api.html.
Life Cycle of a VIF
Tables and their schemas presented in isolation are difficult to understand. Here’s an example.
A VIF on a hypervisor is a virtual network interface attached either to a VM or a container running
directly on that hypervisor (This is different from the interface of a container running inside a VM).
The steps in this example refer often to details of the OVN and OVN Northbound database schemas. Please
see ovn-sb(5) and ovn-nb(5), respectively, for the full story on these databases.
1. A VIF’s life cycle begins when a CMS administrator creates a new VIF using the CMS user
interface or API and adds it to a switch (one implemented by OVN as a logical switch). The CMS
updates its own configuration. This includes associating unique, persistent identifier vif-id
and Ethernet address mac with the VIF.
2. The CMS plugin updates the OVN Northbound database to include the new VIF, by adding a row to
the Logical_Switch_Port table. In the new row, name is vif-id, mac is mac, switch points to
the OVN logical switch’s Logical_Switch record, and other columns are initialized
appropriately.
3. ovn-northd receives the OVN Northbound database update. In turn, it makes the corresponding
updates to the OVN Southbound database, by adding rows to the OVN Southbound database
Logical_Flow table to reflect the new port, e.g. add a flow to recognize that packets destined
to the new port’s MAC address should be delivered to it, and update the flow that delivers
broadcast and multicast packets to include the new port. It also creates a record in the
Binding table and populates all its columns except the column that identifies the chassis.
4. On every hypervisor, ovn-controller receives the Logical_Flow table updates that ovn-northd
made in the previous step. As long as the VM that owns the VIF is powered off, ovn-controller
cannot do much; it cannot, for example, arrange to send packets to or receive packets from the
VIF, because the VIF does not actually exist anywhere.
5. Eventually, a user powers on the VM that owns the VIF. On the hypervisor where the VM is
powered on, the integration between the hypervisor and Open vSwitch (described in
IntegrationGuide.rst) adds the VIF to the OVN integration bridge and stores vif-id in
external_ids:iface-id to indicate that the interface is an instantiation of the new VIF. (None
of this code is new in OVN; this is pre-existing integration work that has already been done
on hypervisors that support OVS.)
6. On the hypervisor where the VM is powered on, ovn-controller notices external_ids:iface-id in
the new Interface. In response, in the OVN Southbound DB, it updates the Binding table’s
chassis column for the row that links the logical port from external_ids: iface-id to the
hypervisor. Afterward, ovn-controller updates the local hypervisor’s OpenFlow tables so that
packets to and from the VIF are properly handled.
7. Some CMS systems, including OpenStack, fully start a VM only when its networking is ready. To
support this, ovn-northd notices the chassis column updated for the row in Binding table and
pushes this upward by updating the up column in the OVN Northbound database’s
Logical_Switch_Port table to indicate that the VIF is now up. The CMS, if it uses this
feature, can then react by allowing the VM’s execution to proceed.
8. On every hypervisor but the one where the VIF resides, ovn-controller notices the completely
populated row in the Binding table. This provides ovn-controller the physical location of the
logical port, so each instance updates the OpenFlow tables of its switch (based on logical
datapath flows in the OVN DB Logical_Flow table) so that packets to and from the VIF can be
properly handled via tunnels.
9. Eventually, a user powers off the VM that owns the VIF. On the hypervisor where the VM was
powered off, the VIF is deleted from the OVN integration bridge.
10. On the hypervisor where the VM was powered off, ovn-controller notices that the VIF was
deleted. In response, it removes the Chassis column content in the Binding table for the
logical port.
11. On every hypervisor, ovn-controller notices the empty Chassis column in the Binding table’s
row for the logical port. This means that ovn-controller no longer knows the physical location
of the logical port, so each instance updates its OpenFlow table to reflect that.
12. Eventually, when the VIF (or its entire VM) is no longer needed by anyone, an administrator
deletes the VIF using the CMS user interface or API. The CMS updates its own configuration.
13. The CMS plugin removes the VIF from the OVN Northbound database, by deleting its row in the
Logical_Switch_Port table.
14. ovn-northd receives the OVN Northbound update and in turn updates the OVN Southbound database
accordingly, by removing or updating the rows from the OVN Southbound database Logical_Flow
table and Binding table that were related to the now-destroyed VIF.
15. On every hypervisor, ovn-controller receives the Logical_Flow table updates that ovn-northd
made in the previous step. ovn-controller updates OpenFlow tables to reflect the update,
although there may not be much to do, since the VIF had already become unreachable when it was
removed from the Binding table in a previous step.
Life Cycle of a Container Interface Inside a VM
OVN provides virtual network abstractions by converting information written in OVN_NB database to
OpenFlow flows in each hypervisor. Secure virtual networking for multi-tenants can only be provided if
OVN controller is the only entity that can modify flows in Open vSwitch. When the Open vSwitch
integration bridge resides in the hypervisor, it is a fair assumption to make that tenant workloads
running inside VMs cannot make any changes to Open vSwitch flows.
If the infrastructure provider trusts the applications inside the containers not to break out and modify
the Open vSwitch flows, then containers can be run in hypervisors. This is also the case when containers
are run inside the VMs and Open vSwitch integration bridge with flows added by OVN controller resides in
the same VM. For both the above cases, the workflow is the same as explained with an example in the
previous section ("Life Cycle of a VIF").
This section talks about the life cycle of a container interface (CIF) when containers are created in the
VMs and the Open vSwitch integration bridge resides inside the hypervisor. In this case, even if a
container application breaks out, other tenants are not affected because the containers running inside
the VMs cannot modify the flows in the Open vSwitch integration bridge.
When multiple containers are created inside a VM, there are multiple CIFs associated with them. The
network traffic associated with these CIFs need to reach the Open vSwitch integration bridge running in
the hypervisor for OVN to support virtual network abstractions. OVN should also be able to distinguish
network traffic coming from different CIFs. There are two ways to distinguish network traffic of CIFs.
One way is to provide one VIF for every CIF (1:1 model). This means that there could be a lot of network
devices in the hypervisor. This would slow down OVS because of all the additional CPU cycles needed for
the management of all the VIFs. It would also mean that the entity creating the containers in a VM should
also be able to create the corresponding VIFs in the hypervisor.
The second way is to provide a single VIF for all the CIFs (1:many model). OVN could then distinguish
network traffic coming from different CIFs via a tag written in every packet. OVN uses this mechanism and
uses VLAN as the tagging mechanism.
1. A CIF’s life cycle begins when a container is spawned inside a VM by the either the same CMS
that created the VM or a tenant that owns that VM or even a container Orchestration System
that is different than the CMS that initially created the VM. Whoever the entity is, it will
need to know the vif-id that is associated with the network interface of the VM through which
the container interface’s network traffic is expected to go through. The entity that creates
the container interface will also need to choose an unused VLAN inside that VM.
2. The container spawning entity (either directly or through the CMS that manages the underlying
infrastructure) updates the OVN Northbound database to include the new CIF, by adding a row to
the Logical_Switch_Port table. In the new row, name is any unique identifier, parent_name is
the vif-id of the VM through which the CIF’s network traffic is expected to go through and the
tag is the VLAN tag that identifies the network traffic of that CIF.
3. ovn-northd receives the OVN Northbound database update. In turn, it makes the corresponding
updates to the OVN Southbound database, by adding rows to the OVN Southbound database’s
Logical_Flow table to reflect the new port and also by creating a new row in the Binding table
and populating all its columns except the column that identifies the chassis.
4. On every hypervisor, ovn-controller subscribes to the changes in the Binding table. When a new
row is created by ovn-northd that includes a value in parent_port column of Binding table, the
ovn-controller in the hypervisor whose OVN integration bridge has that same value in vif-id in
external_ids:iface-id updates the local hypervisor’s OpenFlow tables so that packets to and
from the VIF with the particular VLAN tag are properly handled. Afterward it updates the
chassis column of the Binding to reflect the physical location.
5. One can only start the application inside the container after the underlying network is ready.
To support this, ovn-northd notices the updated chassis column in Binding table and updates
the up column in the OVN Northbound database’s Logical_Switch_Port table to indicate that the
CIF is now up. The entity responsible to start the container application queries this value
and starts the application.
6. Eventually the entity that created and started the container, stops it. The entity, through
the CMS (or directly) deletes its row in the Logical_Switch_Port table.
7. ovn-northd receives the OVN Northbound update and in turn updates the OVN Southbound database
accordingly, by removing or updating the rows from the OVN Southbound database Logical_Flow
table that were related to the now-destroyed CIF. It also deletes the row in the Binding table
for that CIF.
8. On every hypervisor, ovn-controller receives the Logical_Flow table updates that ovn-northd
made in the previous step. ovn-controller updates OpenFlow tables to reflect the update.
Architectural Physical Life Cycle of a Packet
This section describes how a packet travels from one virtual machine or container to another through OVN.
This description focuses on the physical treatment of a packet; for a description of the logical life
cycle of a packet, please refer to the Logical_Flow table in ovn-sb(5).
This section mentions several data and metadata fields, for clarity summarized here:
tunnel key
When OVN encapsulates a packet in Geneve or another tunnel, it attaches extra data to it to
allow the receiving OVN instance to process it correctly. This takes different forms
depending on the particular encapsulation, but in each case we refer to it here as the
``tunnel key.’’ See Tunnel Encapsulations, below, for details.
logical datapath field
A field that denotes the logical datapath through which a packet is being processed. OVN
uses the field that OpenFlow 1.1+ simply (and confusingly) calls ``metadata’’ to store the
logical datapath. (This field is passed across tunnels as part of the tunnel key.)
logical input port field
A field that denotes the logical port from which the packet entered the logical datapath.
OVN stores this in Open vSwitch extension register number 14.
Geneve and STT tunnels pass this field as part of the tunnel key. Although VXLAN tunnels do
not explicitly carry a logical input port, OVN only uses VXLAN to communicate with gateways
that from OVN’s perspective consist of only a single logical port, so that OVN can set the
logical input port field to this one on ingress to the OVN logical pipeline.
logical output port field
A field that denotes the logical port from which the packet will leave the logical
datapath. This is initialized to 0 at the beginning of the logical ingress pipeline. OVN
stores this in Open vSwitch extension register number 15.
Geneve and STT tunnels pass this field as part of the tunnel key. VXLAN tunnels do not
transmit the logical output port field. Since VXLAN tunnels do not carry a logical output
port field in the tunnel key, when a packet is received from VXLAN tunnel by an OVN
hypervisor, the packet is resubmitted to table 8 to determine the output port(s); when the
packet reaches table 32, these packets are resubmitted to table 33 for local delivery by
checking a MLF_RCV_FROM_VXLAN flag, which is set when the packet arrives from a VXLAN
tunnel.
conntrack zone field for logical ports
A field that denotes the connection tracking zone for logical ports. The value only has
local significance and is not meaningful between chassis. This is initialized to 0 at the
beginning of the logical ingress pipeline. OVN stores this in Open vSwitch extension
register number 13.
conntrack zone fields for routers
Fields that denote the connection tracking zones for routers. These values only have local
significance and are not meaningful between chassis. OVN stores the zone information for
DNATting in Open vSwitch extension register number 11 and zone information for SNATing in
Open vSwitch extension register number 12.
logical flow flags
The logical flags are intended to handle keeping context between tables in order to decide
which rules in subsequent tables are matched. These values only have local significance and
are not meaningful between chassis. OVN stores the logical flags in Open vSwitch extension
register number 10.
VLAN ID
The VLAN ID is used as an interface between OVN and containers nested inside a VM (see Life
Cycle of a container interface inside a VM, above, for more information).
Initially, a VM or container on the ingress hypervisor sends a packet on a port attached to the OVN
integration bridge. Then:
1. OpenFlow table 0 performs physical-to-logical translation. It matches the packet’s ingress
port. Its actions annotate the packet with logical metadata, by setting the logical datapath
field to identify the logical datapath that the packet is traversing and the logical input
port field to identify the ingress port. Then it resubmits to table 8 to enter the logical
ingress pipeline.
Packets that originate from a container nested within a VM are treated in a slightly different
way. The originating container can be distinguished based on the VIF-specific VLAN ID, so the
physical-to-logical translation flows additionally match on VLAN ID and the actions strip the
VLAN header. Following this step, OVN treats packets from containers just like any other
packets.
Table 0 also processes packets that arrive from other chassis. It distinguishes them from
other packets by ingress port, which is a tunnel. As with packets just entering the OVN
pipeline, the actions annotate these packets with logical datapath and logical ingress port
metadata. In addition, the actions set the logical output port field, which is available
because in OVN tunneling occurs after the logical output port is known. These three pieces of
information are obtained from the tunnel encapsulation metadata (see Tunnel Encapsulations for
encoding details). Then the actions resubmit to table 33 to enter the logical egress pipeline.
2. OpenFlow tables 8 through 31 execute the logical ingress pipeline from the Logical_Flow table
in the OVN Southbound database. These tables are expressed entirely in terms of logical
concepts like logical ports and logical datapaths. A big part of ovn-controller’s job is to
translate them into equivalent OpenFlow (in particular it translates the table numbers:
Logical_Flow tables 0 through 23 become OpenFlow tables 8 through 31).
Each logical flow maps to one or more OpenFlow flows. An actual packet ordinarily matches only
one of these, although in some cases it can match more than one of these flows (which is not a
problem because all of them have the same actions). ovn-controller uses the first 32 bits of
the logical flow’s UUID as the cookie for its OpenFlow flow or flows. (This is not necessarily
unique, since the first 32 bits of a logical flow’s UUID is not necessarily unique.)
Some logical flows can map to the Open vSwitch ``conjunctive match’’ extension (see
ovs-fields(7)). Flows with a conjunction action use an OpenFlow cookie of 0, because they can
correspond to multiple logical flows. The OpenFlow flow for a conjunctive match includes a
match on conj_id.
Some logical flows may not be represented in the OpenFlow tables on a given hypervisor, if
they could not be used on that hypervisor. For example, if no VIF in a logical switch resides
on a given hypervisor, and the logical switch is not otherwise reachable on that hypervisor
(e.g. over a series of hops through logical switches and routers starting from a VIF on the
hypervisor), then the logical flow may not be represented there.
Most OVN actions have fairly obvious implementations in OpenFlow (with OVS extensions), e.g.
next; is implemented as resubmit, field = constant; as set_field. A few are worth describing
in more detail:
output:
Implemented by resubmitting the packet to table 32. If the pipeline executes more than
one output action, then each one is separately resubmitted to table 32. This can be
used to send multiple copies of the packet to multiple ports. (If the packet was not
modified between the output actions, and some of the copies are destined to the same
hypervisor, then using a logical multicast output port would save bandwidth between
hypervisors.)
get_arp(P, A);
get_nd(P, A);
Implemented by storing arguments into OpenFlow fields, then resubmitting to table 66,
which ovn-controller populates with flows generated from the MAC_Binding table in the OVN
Southbound database. If there is a match in table 66, then its actions store the bound
MAC in the Ethernet destination address field.
(The OpenFlow actions save and restore the OpenFlow fields used for the arguments, so
that the OVN actions do not have to be aware of this temporary use.)
put_arp(P, A, E);
put_nd(P, A, E);
Implemented by storing the arguments into OpenFlow fields, then outputting a packet to
ovn-controller, which updates the MAC_Binding table.
(The OpenFlow actions save and restore the OpenFlow fields used for the arguments, so
that the OVN actions do not have to be aware of this temporary use.)
R = lookup_arp(P, A, M);
R = lookup_nd(P, A, M);
Implemented by storing arguments into OpenFlow fields, then resubmitting to table 67,
which ovn-controller populates with flows generated from the MAC_Binding table in the OVN
Southbound database. If there is a match in table 67, then its actions set the logical
flow flag MLF_LOOKUP_MAC.
(The OpenFlow actions save and restore the OpenFlow fields used for the arguments, so
that the OVN actions do not have to be aware of this temporary use.)
3. OpenFlow tables 32 through 47 implement the output action in the logical ingress pipeline.
Specifically, table 32 handles packets to remote hypervisors, table 33 handles packets to the
local hypervisor, and table 34 checks whether packets whose logical ingress and egress port
are the same should be discarded.
Logical patch ports are a special case. Logical patch ports do not have a physical location
and effectively reside on every hypervisor. Thus, flow table 33, for output to ports on the
local hypervisor, naturally implements output to unicast logical patch ports too. However,
applying the same logic to a logical patch port that is part of a logical multicast group
yields packet duplication, because each hypervisor that contains a logical port in the
multicast group will also output the packet to the logical patch port. Thus, multicast groups
implement output to logical patch ports in table 32.
Each flow in table 32 matches on a logical output port for unicast or multicast logical ports
that include a logical port on a remote hypervisor. Each flow’s actions implement sending a
packet to the port it matches. For unicast logical output ports on remote hypervisors, the
actions set the tunnel key to the correct value, then send the packet on the tunnel port to
the correct hypervisor. (When the remote hypervisor receives the packet, table 0 there will
recognize it as a tunneled packet and pass it along to table 33.) For multicast logical output
ports, the actions send one copy of the packet to each remote hypervisor, in the same way as
for unicast destinations. If a multicast group includes a logical port or ports on the local
hypervisor, then its actions also resubmit to table 33. Table 32 also includes:
• A higher-priority rule to match packets received from VXLAN tunnels, based on flag
MLF_RCV_FROM_VXLAN, and resubmit these packets to table 33 for local delivery. Packets
received from VXLAN tunnels reach here because of a lack of logical output port field
in the tunnel key and thus these packets needed to be submitted to table 8 to determine
the output port.
• A higher-priority rule to match packets received from ports of type localport, based on
the logical input port, and resubmit these packets to table 33 for local delivery.
Ports of type localport exist on every hypervisor and by definition their traffic
should never go out through a tunnel.
• A higher-priority rule to match packets that have the MLF_LOCAL_ONLY logical flow flag
set, and whose destination is a multicast address. This flag indicates that the packet
should not be delivered to remote hypervisors, even if the multicast destination
includes ports on remote hypervisors. This flag is used when ovn-controller is the
originator of the multicast packet. Since each ovn-controller instance is originating
these packets, the packets only need to be delivered to local ports.
• A fallback flow that resubmits to table 33 if there is no other match.
Flows in table 33 resemble those in table 32 but for logical ports that reside locally rather
than remotely. For unicast logical output ports on the local hypervisor, the actions just
resubmit to table 34. For multicast output ports that include one or more logical ports on the
local hypervisor, for each such logical port P, the actions change the logical output port to
P, then resubmit to table 34.
A special case is that when a localnet port exists on the datapath, remote port is connected
by switching to the localnet port. In this case, instead of adding a flow in table 32 to reach
the remote port, a flow is added in table 33 to switch the logical outport to the localnet
port, and resubmit to table 33 as if it were unicasted to a logical port on the local
hypervisor.
Table 34 matches and drops packets for which the logical input and output ports are the same
and the MLF_ALLOW_LOOPBACK flag is not set. It resubmits other packets to table 40.
4. OpenFlow tables 40 through 63 execute the logical egress pipeline from the Logical_Flow table
in the OVN Southbound database. The egress pipeline can perform a final stage of validation
before packet delivery. Eventually, it may execute an output action, which ovn-controller
implements by resubmitting to table 64. A packet for which the pipeline never executes output
is effectively dropped (although it may have been transmitted through a tunnel across a
physical network).
The egress pipeline cannot change the logical output port or cause further tunneling.
5. Table 64 bypasses OpenFlow loopback when MLF_ALLOW_LOOPBACK is set. Logical loopback was
handled in table 34, but OpenFlow by default also prevents loopback to the OpenFlow ingress
port. Thus, when MLF_ALLOW_LOOPBACK is set, OpenFlow table 64 saves the OpenFlow ingress port,
sets it to zero, resubmits to table 65 for logical-to-physical transformation, and then
restores the OpenFlow ingress port, effectively disabling OpenFlow loopback prevents. When
MLF_ALLOW_LOOPBACK is unset, table 64 flow simply resubmits to table 65.
6. OpenFlow table 65 performs logical-to-physical translation, the opposite of table 0. It
matches the packet’s logical egress port. Its actions output the packet to the port attached
to the OVN integration bridge that represents that logical port. If the logical egress port is
a container nested with a VM, then before sending the packet the actions push on a VLAN header
with an appropriate VLAN ID.
Logical Routers and Logical Patch Ports
Typically logical routers and logical patch ports do not have a physical location and effectively reside
on every hypervisor. This is the case for logical patch ports between logical routers and logical
switches behind those logical routers, to which VMs (and VIFs) attach.
Consider a packet sent from one virtual machine or container to another VM or container that resides on a
different subnet. The packet will traverse tables 0 to 65 as described in the previous section
Architectural Physical Life Cycle of a Packet, using the logical datapath representing the logical switch
that the sender is attached to. At table 32, the packet will use the fallback flow that resubmits locally
to table 33 on the same hypervisor. In this case, all of the processing from table 0 to table 65 occurs
on the hypervisor where the sender resides.
When the packet reaches table 65, the logical egress port is a logical patch port. The implementation in
table 65 differs depending on the OVS version, although the observed behavior is meant to be the same:
• In OVS versions 2.6 and earlier, table 65 outputs to an OVS patch port that represents the
logical patch port. The packet re-enters the OpenFlow flow table from the OVS patch port’s
peer in table 0, which identifies the logical datapath and logical input port based on the
OVS patch port’s OpenFlow port number.
• In OVS versions 2.7 and later, the packet is cloned and resubmitted directly to the first
OpenFlow flow table in the ingress pipeline, setting the logical ingress port to the peer
logical patch port, and using the peer logical patch port’s logical datapath (that
represents the logical router).
The packet re-enters the ingress pipeline in order to traverse tables 8 to 65 again, this time using the
logical datapath representing the logical router. The processing continues as described in the previous
section Architectural Physical Life Cycle of a Packet. When the packet reachs table 65, the logical
egress port will once again be a logical patch port. In the same manner as described above, this logical
patch port will cause the packet to be resubmitted to OpenFlow tables 8 to 65, this time using the
logical datapath representing the logical switch that the destination VM or container is attached to.
The packet traverses tables 8 to 65 a third and final time. If the destination VM or container resides on
a remote hypervisor, then table 32 will send the packet on a tunnel port from the sender’s hypervisor to
the remote hypervisor. Finally table 65 will output the packet directly to the destination VM or
container.
The following sections describe two exceptions, where logical routers and/or logical patch ports are
associated with a physical location.
Gateway Routers
A gateway router is a logical router that is bound to a physical location. This includes all of the
logical patch ports of the logical router, as well as all of the peer logical patch ports on logical
switches. In the OVN Southbound database, the Port_Binding entries for these logical patch ports use the
type l3gateway rather than patch, in order to distinguish that these logical patch ports are bound to a
chassis.
When a hypervisor processes a packet on a logical datapath representing a logical switch, and the logical
egress port is a l3gateway port representing connectivity to a gateway router, the packet will match a
flow in table 32 that sends the packet on a tunnel port to the chassis where the gateway router resides.
This processing in table 32 is done in the same manner as for VIFs.
Gateway routers are typically used in between distributed logical routers and physical networks. The
distributed logical router and the logical switches behind it, to which VMs and containers attach,
effectively reside on each hypervisor. The distributed router and the gateway router are connected by
another logical switch, sometimes referred to as a join logical switch. On the other side, the gateway
router connects to another logical switch that has a localnet port connecting to the physical network.
When using gateway routers, DNAT and SNAT rules are associated with the gateway router, which provides a
central location that can handle one-to-many SNAT (aka IP masquerading).
Distributed Gateway Ports
Distributed gateway ports are logical router patch ports that directly connect distributed logical
routers to logical switches with external connection.
There are two types of external connections. Firstly, connection to physical network through a localnet
port. Secondly, connection to another OVN deployment, which will be introduced in section "OVN
Deployments Interconnection".
The primary design goal of distributed gateway ports is to allow as much traffic as possible to be
handled locally on the hypervisor where a VM or container resides. Whenever possible, packets from the VM
or container to the outside world should be processed completely on that VM’s or container’s hypervisor,
eventually traversing a localnet port instance on that hypervisor to the physical network. Whenever
possible, packets from the outside world to a VM or container should be directed through the physical
network directly to the VM’s or container’s hypervisor, where the packet will enter the integration
bridge through a localnet port.
In order to allow for the distributed processing of packets described in the paragraph above, distributed
gateway ports need to be logical patch ports that effectively reside on every hypervisor, rather than
l3gateway ports that are bound to a particular chassis. However, the flows associated with distributed
gateway ports often need to be associated with physical locations, for the following reasons:
• The physical network that the localnet port is attached to typically uses L2 learning. Any
Ethernet address used over the distributed gateway port must be restricted to a single
physical location so that upstream L2 learning is not confused. Traffic sent out the
distributed gateway port towards the localnet port with a specific Ethernet address must be
sent out one specific instance of the distributed gateway port on one specific chassis.
Traffic received from the localnet port (or from a VIF on the same logical switch as the
localnet port) with a specific Ethernet address must be directed to the logical switch’s
patch port instance on that specific chassis.
Due to the implications of L2 learning, the Ethernet address and IP address of the
distributed gateway port need to be restricted to a single physical location. For this
reason, the user must specify one chassis associated with the distributed gateway port.
Note that traffic traversing the distributed gateway port using other Ethernet addresses
and IP addresses (e.g. one-to-one NAT) is not restricted to this chassis.
Replies to ARP and ND requests must be restricted to a single physical location, where the
Ethernet address in the reply resides. This includes ARP and ND replies for the IP address
of the distributed gateway port, which are restricted to the chassis that the user
associated with the distributed gateway port.
• In order to support one-to-many SNAT (aka IP masquerading), where multiple logical IP
addresses spread across multiple chassis are mapped to a single external IP address, it
will be necessary to handle some of the logical router processing on a specific chassis in
a centralized manner. Since the SNAT external IP address is typically the distributed
gateway port IP address, and for simplicity, the same chassis associated with the
distributed gateway port is used.
The details of flow restrictions to specific chassis are described in the ovn-northd documentation.
While most of the physical location dependent aspects of distributed gateway ports can be handled by
restricting some flows to specific chassis, one additional mechanism is required. When a packet leaves
the ingress pipeline and the logical egress port is the distributed gateway port, one of two different
sets of actions is required at table 32:
• If the packet can be handled locally on the sender’s hypervisor (e.g. one-to-one NAT
traffic), then the packet should just be resubmitted locally to table 33, in the normal
manner for distributed logical patch ports.
• However, if the packet needs to be handled on the chassis associated with the distributed
gateway port (e.g. one-to-many SNAT traffic or non-NAT traffic), then table 32 must send
the packet on a tunnel port to that chassis.
In order to trigger the second set of actions, the chassisredirect type of southbound Port_Binding has
been added. Setting the logical egress port to the type chassisredirect logical port is simply a way to
indicate that although the packet is destined for the distributed gateway port, it needs to be redirected
to a different chassis. At table 32, packets with this logical egress port are sent to a specific
chassis, in the same way that table 32 directs packets whose logical egress port is a VIF or a type
l3gateway port to different chassis. Once the packet arrives at that chassis, table 33 resets the logical
egress port to the value representing the distributed gateway port. For each distributed gateway port,
there is one type chassisredirect port, in addition to the distributed logical patch port representing
the distributed gateway port.
High Availability for Distributed Gateway Ports
OVN allows you to specify a prioritized list of chassis for a distributed gateway port. This is done by
associating multiple Gateway_Chassis rows with a Logical_Router_Port in the OVN_Northbound database.
When multiple chassis have been specified for a gateway, all chassis that may send packets to that
gateway will enable BFD on tunnels to all configured gateway chassis. The current master chassis for the
gateway is the highest priority gateway chassis that is currently viewed as active based on BFD status.
For more information on L3 gateway high availability, please refer to
http://docs.openvswitch.org/en/latest/topics/high-availability.
ARP request and ND NS packet processing
Due to the fact that ARP requests and ND NA packets are usually broadcast packets, for performance
reasons, OVN deals with requests that target OVN owned IP addresses (i.e., IP addresses configured on the
router ports, VIPs, NAT IPs) in a specific way and only forwards them to the logical router that owns the
target IP address. This behavior is different than that of traditional swithces and implies that other
routers/hosts connected to the logical switch will not learn the MAC/IP binding from the request packet.
All other ARP and ND packets are flooded in the L2 broadcast domain and to all attached logical patch
ports.
Multiple localnet logical switches connected to a Logical Router
It is possible to have multiple logical switches each with a localnet port (representing physical
networks) connected to a logical router, in which one localnet logical switch may provide the external
connectivity via a distributed gateway port and rest of the localnet logical switches use VLAN tagging in
the physical network. It is expected that ovn-bridge-mappings is configured appropriately on the chassis
for all these localnet networks.
East West routing
East-West routing between these localnet VLAN tagged logical switches work almost the same way as normal
logical switches. When the VM sends such a packet, then:
1. It first enters the ingress pipeline, and then egress pipeline of the source localnet logical
switch datapath. It then enters the ingress pipeline of the logical router datapath via the
logical router port in the source chassis.
2. Routing decision is taken.
3. From the router datapath, packet enters the ingress pipeline and then egress pipeline of the
destination localnet logical switch datapath and goes out of the integration bridge to the
provider bridge ( belonging to the destination logical switch) via the localnet port. While
sending the packet to provider bridge, we also replace router port MAC as source MAC with a
chassis unique MAC.
This chassis unique MAC is configured as global ovs config on each chassis (eg. via "ovs-vsctl
set open . external-ids: ovn-chassis-mac-mappings="phys:aa:bb:cc:dd:ee:$i$i""). For more
details, see ovn-controller(8).
If the above is not configured, then source MAC would be the router port MAC. This could
create problem if we have more than one chassis. This is because, since the router port is
distributed, the same (MAC,VLAN) tuple will seen by physical network from other chassis as
well, which could cause these issues:
• Continuous MAC moves in top-of-rack switch (ToR).
• ToR dropping the traffic, which is causing continuous MAC moves.
• ToR blocking the ports from which MAC moves are happening.
4. The destination chassis receives the packet via the localnet port and sends it to the
integration bridge. Before entering the integration bridge the source mac of the packet will
be replaced with router port mac again. The packet enters the ingress pipeline and then egress
pipeline of the destination localnet logical switch and finally gets delivered to the
destination VM port.
External traffic
The following happens when a VM sends an external traffic (which requires NATting) and the chassis
hosting the VM doesn’t have a distributed gateway port.
1. The packet first enters the ingress pipeline, and then egress pipeline of the source localnet
logical switch datapath. It then enters the ingress pipeline of the logical router datapath
via the logical router port in the source chassis.
2. Routing decision is taken. Since the gateway router or the distributed gateway port doesn’t
reside in the source chassis, the traffic is redirected to the gateway chassis via the tunnel
port.
3. The gateway chassis receives the packet via the tunnel port and the packet enters the egress
pipeline of the logical router datapath. NAT rules are applied here. The packet then enters
the ingress pipeline and then egress pipeline of the localnet logical switch datapath which
provides external connectivity and finally goes out via the localnet port of the logical
switch which provides external connectivity.
Although this works, the VM traffic is tunnelled when sent from the compute chassis to the gateway
chassis. In order for it to work properly, the MTU of the localnet logical switches must be lowered to
account for the tunnel encapsulation.
Centralized routing for localnet VLAN tagged logical switches connected to a Logical Router "
To overcome the tunnel encapsulation problem described in the previous section, OVN supports the option
of enabling centralized routing for localnet VLAN tagged logical switches. CMS can configure the option
options:reside-on-redirect-chassis to true for each Logical_Router_Port which connects to the localnet
VLAN tagged logical switches. This causes the gateway chassis (hosting the distributed gateway port) to
handle all the routing for these networks, making it centralized. It will reply to the ARP requests for
the logical router port IPs.
If the logical router doesn’t have a distributed gateway port connecting to the localnet logical switch
which provides external connectivity, then this option is ignored by OVN.
The following happens when a VM sends an east-west traffic which needs to be routed:
1. The packet first enters the ingress pipeline, and then egress pipeline of the source localnet
logical switch datapath and is sent out via the localnet port of the source localnet logical
switch (instead of sending it to router pipeline).
2. The gateway chassis receives the packet via the localnet port of the source localnet logical
switch and sends it to the integration bridge. The packet then enters the ingress pipeline,
and then egress pipeline of the source localnet logical switch datapath and enters the ingress
pipeline of the logical router datapath.
3. Routing decision is taken.
4. From the router datapath, packet enters the ingress pipeline and then egress pipeline of the
destination localnet logical switch datapath. It then goes out of the integration bridge to
the provider bridge ( belonging to the destination logical switch) via the localnet port.
5. The destination chassis receives the packet via the localnet port and sends it to the
integration bridge. The packet enters the ingress pipeline and then egress pipeline of the
destination localnet logical switch and finally delivered to the destination VM port.
The following happens when a VM sends an external traffic which requires NATting:
1. The packet first enters the ingress pipeline, and then egress pipeline of the source localnet
logical switch datapath and is sent out via the localnet port of the source localnet logical
switch (instead of sending it to router pipeline).
2. The gateway chassis receives the packet via the localnet port of the source localnet logical
switch and sends it to the integration bridge. The packet then enters the ingress pipeline,
and then egress pipeline of the source localnet logical switch datapath and enters the ingress
pipeline of the logical router datapath.
3. Routing decision is taken and NAT rules are applied.
4. From the router datapath, packet enters the ingress pipeline and then egress pipeline of the
localnet logical switch datapath which provides external connectivity. It then goes out of the
integration bridge to the provider bridge (belonging to the logical switch which provides
external connectivity) via the localnet port.
The following happens for the reverse external traffic.
1. The gateway chassis receives the packet from the localnet port of the logical switch which
provides external connectivity. The packet then enters the ingress pipeline and then egress
pipeline of the localnet logical switch (which provides external connectivity). The packet
then enters the ingress pipeline of the logical router datapath.
2. The ingress pipeline of the logical router datapath applies the unNATting rules. The packet
then enters the ingress pipeline and then egress pipeline of the source localnet logical
switch. Since the source VM doesn’t reside in the gateway chassis, the packet is sent out via
the localnet port of the source logical switch.
3. The source chassis receives the packet via the localnet port and sends it to the integration
bridge. The packet enters the ingress pipeline and then egress pipeline of the source localnet
logical switch and finally gets delivered to the source VM port.
VLAN-based redirection: As an enhancement to reside-on-redirect-chassis we support VLAN-based redirection
as well. By setting options:redirect-type to bridged on a gateway chassis attached router port, user can
enforce that redirected packet should not use tunnel port but rather use localnet port of peer logical
switch to go out on a physical VLAN.
Following happens for bridged redirection:
1. On compute chassis, packet passes though logical router’s ingress pipeline.
2. If logical outport is gateway chassis attached router port then packet is "redirected" to
gateway chassis using peer logical switch’s localnet port.
3. This redirected packet has destination mac as router port mac (the one to which gateway
chassis is attached). Its VLAN id is that of localnet port (peer logical switch of the logical
router port).
4. On the gateway chassis packet will enter the logical router pipeline again and this time it
will passthrough egress pipeline as well.
5. Reverse traffic packet flows stays the same.
Some guidelines and expections with bridged redirection:
1. Since router port mac is destination mac, hence it has to be ensured that physical network
learns it on ONLY from the gateway chassis. Which means that ovn-chassis-mac-mappings should
be configure on all the compute nodes, so that physical network never learn router port mac
from compute nodes.
2. Since packet enters logical router ingress pipeline twice (once on compute chassis and again
on gateway chassis), hence ttl will be decremented twice.
3. Default redirection type continues to be overlay. User can switch the redirect-type between
bridged and overlay by changing the value of options:redirect-type
Life Cycle of a VTEP gateway
A gateway is a chassis that forwards traffic between the OVN-managed part of a logical network and a
physical VLAN, extending a tunnel-based logical network into a physical network.
The steps below refer often to details of the OVN and VTEP database schemas. Please see ovn-sb(5),
ovn-nb(5) and vtep(5), respectively, for the full story on these databases.
1. A VTEP gateway’s life cycle begins with the administrator registering the VTEP gateway as a
Physical_Switch table entry in the VTEP database. The ovn-controller-vtep connected to this
VTEP database, will recognize the new VTEP gateway and create a new Chassis table entry for it
in the OVN_Southbound database.
2. The administrator can then create a new Logical_Switch table entry, and bind a particular vlan
on a VTEP gateway’s port to any VTEP logical switch. Once a VTEP logical switch is bound to a
VTEP gateway, the ovn-controller-vtep will detect it and add its name to the
vtep_logical_switches column of the Chassis table in the OVN_Southbound database. Note, the
tunnel_key column of VTEP logical switch is not filled at creation. The ovn-controller-vtep
will set the column when the correponding vtep logical switch is bound to an OVN logical
network.
3. Now, the administrator can use the CMS to add a VTEP logical switch to the OVN logical
network. To do that, the CMS must first create a new Logical_Switch_Port table entry in the
OVN_Northbound database. Then, the type column of this entry must be set to "vtep". Next, the
vtep-logical-switch and vtep-physical-switch keys in the options column must also be
specified, since multiple VTEP gateways can attach to the same VTEP logical switch.
4. The newly created logical port in the OVN_Northbound database and its configuration will be
passed down to the OVN_Southbound database as a new Port_Binding table entry. The
ovn-controller-vtep will recognize the change and bind the logical port to the corresponding
VTEP gateway chassis. Configuration of binding the same VTEP logical switch to a different OVN
logical networks is not allowed and a warning will be generated in the log.
5. Beside binding to the VTEP gateway chassis, the ovn-controller-vtep will update the tunnel_key
column of the VTEP logical switch to the corresponding Datapath_Binding table entry’s
tunnel_key for the bound OVN logical network.
6. Next, the ovn-controller-vtep will keep reacting to the configuration change in the
Port_Binding in the OVN_Northbound database, and updating the Ucast_Macs_Remote table in the
VTEP database. This allows the VTEP gateway to understand where to forward the unicast traffic
coming from the extended external network.
7. Eventually, the VTEP gateway’s life cycle ends when the administrator unregisters the VTEP
gateway from the VTEP database. The ovn-controller-vtep will recognize the event and remove
all related configurations (Chassis table entry and port bindings) in the OVN_Southbound
database.
8. When the ovn-controller-vtep is terminated, all related configurations in the OVN_Southbound
database and the VTEP database will be cleaned, including Chassis table entries for all
registered VTEP gateways and their port bindings, and all Ucast_Macs_Remote table entries and
the Logical_Switch tunnel keys.
OVN Deployments Interconnection
It is not uncommon for an operator to deploy multiple OVN clusters, for two main reasons. Firstly, an
operator may prefer to deploy one OVN cluster for each availability zone, e.g. in different physical
regions, to avoid single point of failure. Secondly, there is always an upper limit for a single OVN
control plane to scale.
Although the control planes of the different availability zone (AZ)s are independent from each other, the
workloads from different AZs may need to communicate across the zones. The OVN interconnection feature
provides a native way to interconnect different AZs by L3 routing through transit overlay networks
between logical routers of different AZs.
A global OVN Interconnection Northbound database is introduced for the operator (probably through CMS
systems) to configure transit logical switches that connect logical routers from different AZs. A transit
switch is similar to a regular logical switch, but it is used for interconnection purpose only.
Typically, each transit switch can be used to connect all logical routers that belong to same tenant
across all AZs.
A dedicated daemon process ovn-ic, OVN interconnection controller, in each AZ will consume this data and
populate corresponding logical switches to their own northbound databases for each AZ, so that logical
routers can be connected to the transit switch by creating patch port pairs in their northbound
databases. Any router ports connected to the transit switches are considered interconnection ports, which
will be exchanged between AZs.
Physically, when workloads from different AZs communicate, packets need to go through multiple hops:
source chassis, source gateway, destination gateway and destination chassis. All these hops are connected
through tunnels so that the packets never leave overlay networks. A distributed gateway port is required
to connect the logical router to a transit switch, with a gateway chassis specified, so that the traffic
can be forwarded through the gateway chassis.
A global OVN Interconnection Southbound database is introduced for exchanging control plane information
between the AZs. The data in this database is populated and consumed by the ovn-ic, of each AZ. The main
information in this database includes:
• Datapath bindings for transit switches, which mainly contains the tunnel keys generated for
each transit switch. Separate key ranges are reserved for transit switches so that they
will never conflict with any tunnel keys locally assigned for datapaths within each AZ.
• Availability zones, which are registerd by ovn-ic from each AZ.
• Gateways. Each AZ specifies chassises that are supposed to work as interconnection
gateways, and the ovn-ic will populate this information to the interconnection southbound
DB. The ovn-ic from all the other AZs will learn the gateways and populate to their own
southbound DB as a chassis.
• Port bindings for logical switch ports created on the transit switch. Each AZ maintains
their logical router to transit switch connections independently, but ovn-ic automatically
populates local port bindings on transit switches to the global interconnection southbound
DB, and learns remote port bindings from other AZs back to its own northbound and
southbound DBs, so that logical flows can be produced and then translated to OVS flows
locally, which finally enables data plane communication.
• Routes that are advertised between different AZs. If enabled, routes are automatically
exchanged by ovn-ic. Both static routes and directly connected subnets are advertised.
Options in options column of the NB_Global table of OVN_NB database control the behavior of
route advertisement, such as enable/disable the advertising/learning routes, whether
default routes are advertised/learned, and blacklisted CIDRs. See ovn-nb(5) for more
details.
The tunnel keys for transit switch datapaths and related port bindings must be agreed across all AZs.
This is ensured by generating and storing the keys in the global interconnection southbound database. Any
ovn-ic from any AZ can allocate the key, but race conditions are solved by enforcing unique index for the
column in the database.
Once each AZ’s NB and SB databases are populated with interconnection switches and ports, and agreed upon
the tunnel keys, data plane communication between the AZs are established.
A day in the life of a packet crossing AZs
1. An IP packet is sent out from a VIF on a hypervisor (HV1) of AZ1, with destination IP
belonging to a VIF in AZ2.
2. In HV1’s OVS flow tables, the packet goes through logical switch and logical router pipelines,
and in a logical router pipeline, the routing stage finds out the next hop for the destination
IP, which belongs to a remote logical router port in AZ2, and the output port, which is a
chassis-redirect port located on an interconnection gateway (GW1 in AZ1), so HV1 sends the
packet to GW1 through tunnel.
3. On GW1, it continues with the logical router pipe line and switches to the transit switch’s
pipeline through the peer port of the chassis redirect port. In the transit switch’s pipeline
it outputs to the remote logical port which is located on a gateway (GW2) in AZ2, so the GW1
sends the packet to GW2 in tunnel.
4. On GW2, it continues with the transit switch pipeline and switches to the logical router
pipeline through the peer port, which is a chassis redirect port that is located on GW2. The
logical router pipeline then forwards the packet to relevant logical pipelines according to
the destination IP address, and figures out the MAC and location of the destination VIF port -
a hypervisor (HV2). The GW2 then sends the packet to HV2 in tunnel.
5. On HV2, the packet is delivered to the final destination VIF port by the logical switch egress
pipeline, just the same way as for intra-AZ communications.
Native OVN services for external logical ports
To support OVN native services (like DHCP/IPv6 RA/DNS lookup) to the cloud resources which are external,
OVN supports external logical ports.
Below are some of the use cases where external ports can be used.
• VMs connected to SR-IOV nics - Traffic from these VMs by passes the kernel stack and local
ovn-controller do not bind these ports and cannot serve the native services.
• When CMS supports provisioning baremetal servers.
OVN will provide the native services if CMS has done the below configuration in the OVN Northbound
Database.
• A row is created in Logical_Switch_Port, configuring the addresses column and setting the
type to external.
• ha_chassis_group column is configured.
• The HA chassis which belongs to the HA chassis group has the ovn-bridge-mappings configured
and has proper L2 connectivity so that it can receive the DHCP and other related request
packets from these external resources.
• The Logical_Switch of this port has a localnet port.
• Native OVN services are enabled by configuring the DHCP and other options like the way it
is done for the normal logical ports.
It is recommended to use the same HA chassis group for all the external ports of a logical switch.
Otherwise, the physical switch might see MAC flap issue when different chassis provide the native
services. For example when supporting native DHCPv4 service, DHCPv4 server mac (configured in
options:server_mac column in table DHCP_Options) originating from different ports can cause MAC flap
issue. The MAC of the logical router IP(s) can also flap if the same HA chassis group is not set for all
the external ports of a logical switch.
SECURITY
Role-Based Access Controls for the Soutbound DB
In order to provide additional security against the possibility of an OVN chassis becoming compromised in
such a way as to allow rogue software to make arbitrary modifications to the southbound database state
and thus disrupt the OVN network, role-based access controls (see ovsdb-server(1) for additional details)
are provided for the southbound database.
The implementation of role-based access controls (RBAC) requires the addition of two tables to an OVSDB
schema: the RBAC_Role table, which is indexed by role name and maps the the names of the various tables
that may be modifiable for a given role to individual rows in a permissions table containing detailed
permission information for that role, and the permission table itself which consists of rows containing
the following information:
Table Name
The name of the associated table. This column exists primarily as an aid for humans reading
the contents of this table.
Auth Criteria
A set of strings containing the names of columns (or column:key pairs for columns
containing string:string maps). The contents of at least one of the columns or column:key
values in a row to be modified, inserted, or deleted must be equal to the ID of the client
attempting to act on the row in order for the authorization check to pass. If the
authorization criteria is empty, authorization checking is disabled and all clients for the
role will be treated as authorized.
Insert/Delete
Row insertion/deletion permission; boolean value indicating whether insertion and deletion
of rows is allowed for the associated table. If true, insertion and deletion of rows is
allowed for authorized clients.
Updatable Columns
A set of strings containing the names of columns or column:key pairs that may be updated or
mutated by authorized clients. Modifications to columns within a row are only permitted
when the authorization check for the client passes and all columns to be modified are
included in this set of modifiable columns.
RBAC configuration for the OVN southbound database is maintained by ovn-northd. With RBAC enabled,
modifications are only permitted for the Chassis, Encap, Port_Binding, and MAC_Binding tables, and are
resstricted as follows:
Chassis
Authorization: client ID must match the chassis name.
Insert/Delete: authorized row insertion and deletion are permitted.
Update: The columns nb_cfg, external_ids, encaps, and vtep_logical_switches may be modified
when authorized.
Encap Authorization: client ID must match the chassis name.
Insert/Delete: row insertion and row deletion are permitted.
Update: The columns type, options, and ip can be modified.
Port_Binding
Authorization: disabled (all clients are considered authorized. A future enhancement may
add columns (or keys to external_ids) in order to control which chassis are allowed to bind
each port.
Insert/Delete: row insertion/deletion are not permitted (ovn-northd maintains rows in this
table.
Update: Only modifications to the chassis column are permitted.
MAC_Binding
Authorization: disabled (all clients are considered to be authorized).
Insert/Delete: row insertion/deletion are permitted.
Update: The columns logical_port, ip, mac, and datapath may be modified by ovn-controller.
IGMP_Group
Authorization: disabled (all clients are considered to be authorized).
Insert/Delete: row insertion/deletion are permitted.
Update: The columns address, chassis, datapath, and ports may be modified by ovn-
controller.
Enabling RBAC for ovn-controller connections to the southbound database requires the following steps:
1. Creating SSL certificates for each chassis with the certificate CN field set to the chassis
name (e.g. for a chassis with external-ids:system-id=chassis-1, via the command "ovs-pki -u
req+sign chassis-1 switch").
2. Configuring each ovn-controller to use SSL when connecting to the southbound database (e.g.
via "ovs-vsctl set open . external-ids:ovn-remote=ssl:x.x.x.x:6642").
3. Configuring a southbound database SSL remote with "ovn-controller" role (e.g. via "ovn-sbctl
set-connection role=ovn-controller pssl:6642").
Encrypt Tunnel Traffic with IPsec
OVN tunnel traffic goes through physical routers and switches. These physical devices could be untrusted
(devices in public network) or might be compromised. Enabling encryption to the tunnel traffic can
prevent the traffic data from being monitored and manipulated.
The tunnel traffic is encrypted with IPsec. The CMS sets the ipsec column in the northbound NB_Global
table to enable or disable IPsec encrytion. If ipsec is true, all OVN tunnels will be encrypted. If ipsec
is false, no OVN tunnels will be encrypted.
When CMS updates the ipsec column in the northbound NB_Global table, ovn-northd copies the value to the
ipsec column in the southbound SB_Global table. ovn-controller in each chassis monitors the southbound
database and sets the options of the OVS tunnel interface accordingly. OVS tunnel interface options are
monitored by the ovs-monitor-ipsec daemon which configures IKE daemon to set up IPsec connections.
Chassis authenticates each other by using certificate. The authentication succeeds if the other end in
tunnel presents a certificate signed by a trusted CA and the common name (CN) matches the expected
chassis name. The SSL certificates used in role-based access controls (RBAC) can be used in IPsec. Or use
ovs-pki to create different certificates. The certificate is required to be x.509 version 3, and with CN
field and subjectAltName field being set to the chassis name.
The CA certificate, chassis certificate and private key are required to be installed in each chassis
before enabling IPsec. Please see ovs-vswitchd.conf.db(5) for setting up CA based IPsec authentication.
DESIGN DECISIONS
Tunnel Encapsulations
OVN annotates logical network packets that it sends from one hypervisor to another with the following
three pieces of metadata, which are encoded in an encapsulation-specific fashion:
• 24-bit logical datapath identifier, from the tunnel_key column in the OVN Southbound
Datapath_Binding table.
• 15-bit logical ingress port identifier. ID 0 is reserved for internal use within OVN. IDs 1
through 32767, inclusive, may be assigned to logical ports (see the tunnel_key column in
the OVN Southbound Port_Binding table).
• 16-bit logical egress port identifier. IDs 0 through 32767 have the same meaning as for
logical ingress ports. IDs 32768 through 65535, inclusive, may be assigned to logical
multicast groups (see the tunnel_key column in the OVN Southbound Multicast_Group table).
For hypervisor-to-hypervisor traffic, OVN supports only Geneve and STT encapsulations, for the following
reasons:
• Only STT and Geneve support the large amounts of metadata (over 32 bits per packet) that
OVN uses (as described above).
• STT and Geneve use randomized UDP or TCP source ports that allows efficient distribution
among multiple paths in environments that use ECMP in their underlay.
• NICs are available to offload STT and Geneve encapsulation and decapsulation.
Due to its flexibility, the preferred encapsulation between hypervisors is Geneve. For Geneve
encapsulation, OVN transmits the logical datapath identifier in the Geneve VNI. OVN transmits the logical
ingress and logical egress ports in a TLV with class 0x0102, type 0x80, and a 32-bit value encoded as
follows, from MSB to LSB:
1 15 16
+---+------------+-----------+
|rsv|ingress port|egress port|
+---+------------+-----------+
0
Environments whose NICs lack Geneve offload may prefer STT encapsulation for performance reasons. For STT
encapsulation, OVN encodes all three pieces of logical metadata in the STT 64-bit tunnel ID as follows,
from MSB to LSB:
9 15 16 24
+--------+------------+-----------+--------+
|reserved|ingress port|egress port|datapath|
+--------+------------+-----------+--------+
0
For connecting to gateways, in addition to Geneve and STT, OVN supports VXLAN, because only VXLAN support
is common on top-of-rack (ToR) switches. Currently, gateways have a feature set that matches the
capabilities as defined by the VTEP schema, so fewer bits of metadata are necessary. In the future,
gateways that do not support encapsulations with large amounts of metadata may continue to have a reduced
feature set.
Open vSwitch 20.03.2 OVN Architecture ovn-architecture(7)