Provided by: libguestfs-tools_1.40.2-7ubuntu5_amd64 bug

名前

       virt-v2v-output-openstack - Using virt-v2v to convert guests to OpenStack

書式

        virt-v2v [-i* options] -o openstack
                               -oo server-id=SERVER
                               [-oo guest-id=GUEST]
                               [-oo verify-server-certificate=false]
                               [-oo os-username=admin] [-oo os-*=*]

        virt-v2v [-i* options] -o glance

説明

       This page documents how to use virt-v2v(1) to convert guests to run on OpenStack.  There
       are two output modes you can select, but only -o openstack should be used normally.

       -o openstack -oo server-id=SERVER [...]
           Full description: "OUTPUT TO OPENSTACK"

           This is the modern method for uploading to OpenStack via the REST API.  Guests can be
           directly converted into Cinder volumes.

       -o glance
           Full description: "OUTPUT TO GLANCE"

           This is the old method for uploading to Glance.  Unfortunately Glance is not well
           suited to storing converted guests (since virt-v2v deals with "pets" not templated
           "cattle"), so this method is not recommended unless you really know what you are
           doing.

OUTPUT TO OPENSTACK

       To output to OpenStack, use the -o openstack option.

   OpenStack: Setting up a conversion appliance
       When virt-v2v is converting to OpenStack, it is unusual in that virt-v2v must be running
       inside a virtual machine running on top of the OpenStack overcloud.  This virtual machine
       is called the "conversion appliance".  Note this virtual machine is unrelated to the guest
       which is being converted.

       The reason for this is because to create Cinder volumes that will contain the guest data
       (for the converted guest) we must attach those Cinder volumes to an OpenStack virtual
       machine.

       The "openstack" command must be installed in the appliance.  We use it for communicating
       with OpenStack.

       When virt-v2v is running in the conversion appliance, you must supply the name or UUID of
       the conversion appliance to virt-v2v, eg:

        $ openstack server list
        +--------------------------------------+-----------+--------+
        | ID                                   | Name      | Status |
        +--------------------------------------+-----------+--------+
        | bbb0147a-44b9-4d19-9a9d-10ca9a984744 | test1     | ACTIVE |
        +--------------------------------------+-----------+--------+

        # virt-v2v [...] \
              -o openstack -oo server-id=bbb0147a-44b9-4d19-9a9d-10ca9a984744

       または:

        # virt-v2v [...] -o openstack -oo server-id=test1

       You can run many parallel conversions inside a single conversion appliance if you want,
       subject to having enough resources available.  However OpenStack itself imposes a limit
       that you should be aware of: OpenStack cannot attach more than around 25 disks [the exact
       number varies with configuration] to a single appliance, and that limits the number of
       guests which can be converted in parallel, because each guest's disk must be attached to
       the appliance while being copied.

   OpenStack: Authentication
       Converting to OpenStack requires access to the tenant (non-admin) API endpoints.  You will
       need to either set up your "$OS_*" environment variables or use output options on the
       virt-v2v command line to authenticate with OpenStack.

       Normally there is a file called something like "stackrc", "overcloudrc" etc which you can
       simply "source" to set everything up.

       例:

        export OS_USERNAME=admin

       または:

        virt-v2v [...] -o openstack -oo os-username=admin

       are equivalent, and have the same effect as using --os-username on the command line of
       OpenStack tools.

   OpenStack: Running as root
       Because virt-v2v must access Cinder volumes which are presented as /dev devices to the
       conversion appliance, virt-v2v must usually run as root in -o openstack mode.

       If you use "sudo" to start virt-v2v and you are using environment variables for
       authentication, remember to use the "sudo -E" option to preserve the environment.

   OpenStack: Guest ID
        virt-v2v [...] -o openstack -oo guest-id=123-456-7890

       You may optionally specify -oo guest-id=... on the command line.  The ID (which can be any
       string) is saved on each Cinder volume in the "virt_v2v_guest_id" volume property.

       This can be used to find disks associated with a guest, or to associate which disks are
       related to which guests when converting many guests.

   OpenStack: Ignore server certificate
       Using -oo verify-server-certificate=false you can tell the openstack client to ignore the
       server certificate when connecting to the OpenStack API endpoints.  This has the same
       effect as passing the --insecure option to the "openstack" command.

   OpenStack: Converting a guest
       The final command to convert the guest, running as root, will be:

        # virt-v2v [-i options ...] \
              -o openstack -oo server-id=NAME|UUID [-oo guest-id=ID]

       If you include authentication options on the command line then:

        # virt-v2v [-i options ...] \
              -o openstack -oo server-id=NAME|UUID -oo os-username=admin [etc]

   OpenStack: Booting the guest
       Guests are converted as Cinder volume(s) (one volume per disk in the original guest).  To
       boot them use the "openstack server create --volume" option:

        $ openstack volume list
        +--------------------------------------+---------------+-----------+
        | ID                                   | Name          | Status    |
        +--------------------------------------+---------------+-----------+
        | c4d06d15-22ef-462e-9eff-ab54ab285a1f | fedora-27-sda | available |
        +--------------------------------------+---------------+-----------+
        $ openstack server create \
              --flavor x1.small \
              --volume c4d06d15-22ef-462e-9eff-ab54ab285a1f \
              myguest
        $ openstack console url show myguest

   OpenStack: Other conversion options
       To specify the Cinder volume type, use -os.  If not specified then no Cinder volume type
       is used.

       The following options are not supported with OpenStack: -oa, -of.

OUTPUT TO GLANCE

       Note this is a legacy option.  In most cases you should use "OUTPUT TO OPENSTACK" instead.

       To output to OpenStack Glance, use the -o glance option.

       This runs the glance(1) CLI program which must be installed on the virt-v2v conversion
       host.  For authentication to work, you will need to set "OS_*" environment variables.  In
       most cases you can do this by sourcing a file called something like keystonerc_admin.

       Virt-v2v adds metadata for the guest to Glance, describing such things as the guest
       operating system and what drivers it requires.  The command "glance image-show" will
       display the metadata as "Property" fields such as "os_type" and "hw_disk_bus".

   Glance and sparseness
       Glance image upload doesn't appear to correctly handle sparseness.  For this reason, using
       qcow2 will be faster and use less space on the Glance server.  Use the virt-v2v -of qcow2
       option.

   Glance and multiple disks
       If the guest has a single disk, then the name of the disk in Glance will be the name of
       the guest.  You can control this using the -on option.

       Glance doesn't have a concept of associating multiple disks with a single guest, and Nova
       doesn't allow you to boot a guest from multiple Glance disks either.  If the guest has
       multiple disks, then the first (assumed to be the system disk) will have the name of the
       guest, and the second and subsequent data disks will be called "guestname-disk2",
       "guestname-disk3" etc.  It may be best to leave the system disk in Glance, and import the
       data disks to Cinder.

関連項目

       virt-v2v(1),
       https://docs.openstack.org/python-openstackclient/latest/cli/man/openstack.html,
       glance(1).

著者

       Richard W.M. Jones

COPYRIGHT

       Copyright (C) 2009-2019 Red Hat Inc.

LICENSE

BUGS

       To get a list of bugs against libguestfs, use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       •   The version of libguestfs.

       •   Where you got libguestfs (eg. which Linux distro, compiled from source, etc)

       •   Describe the bug accurately and give a way to reproduce it.

       •   Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
           report.