NAME

       array-info - check the status of a HP (Compaq) SmartArray controller

SYNOPSIS

       array-info -d array_device_path [-a|-l|-A|-c|-s|-L|-h]

DESCRIPTION

       Array-info  is  a  command line tool to retrieve informations and logical drives status from several RAID
       controllers (currently HP Compaq IDA and CISS and MD).   It  displays  informations  about  the  firmware
       version,  Rom  revision,  number  of  physical  and logical drives on the controller, aswell as the fault
       tolerance, size, number of physical disks and status for each logical drive.

OPTIONS

       --device | -d
              Path to array device, e.g. /dev/ida/c0d0 or /dev/cciss/c0d1

       --all-drives | -a
              Show informations about all drives

       --logical drive | -l
              Show informations about selected logical drive

       --show-ctrl | -c
              Show informations about controller

       --show-logical | -L
              Show informations about logical drives

       --show-physical | -p
              Show physical device informations

       --show-status | -s
              Show status of logical drives

       --show-all | -A
              Show all informations

       --version | -V
              Show version

       -h     Show help about options

COPYRIGHT

       This manual page was written by Raphaël Pinson <<raphink@ubuntu.com>>.  Permission is  granted  to  copy,
       distribute  and/or  modify  this document under the terms of the GNU General Public License, Version 2 or
       any later version published by the Free Software Foundation.

                                                   2006-12-15                                      array-info(1)