Ubuntu Manpage: compiler - TTCN-3 and ASN.1 to C++ translator

Provided by: eclipse-titan_6.6.1-1_amd64

NAME

       compiler - TTCN-3 and ASN.1 to C++ translator

SYNOPSIS

       compiler  [ -abcdDeEfFgiIjlLMnNpqrRsStuwxXyY0 ] [ -V  verb_level ] [ -J  file ] [ -K  file
       ] [ -z  file ] [ -o  dir ] [ -P  top_level_pdu ] ...  [ -Q n ] [ -U none|type|'number' ] [
       -T ] module.ttcn ...  [ -A ] module.asn ...  [ - module.ttcn ... module.asn ... ]
       or
       compiler -v
       or
       compiler  --ttcn2json  [  -jf  ]  [  -T  ]  module.ttcn  ...   [  -A ] module.asn ...  [ -
       schema.json  ]

DESCRIPTION

       This manual page is a quick reference for the TTCN-3 and ASN.1 to  C++  (or  JSON  schema)
       compiler  of  the TTCN-3 Test Executor. It only summarizes the meaning of all command line
       options. For more details please consult the Programmer's Technical  Reference  for  TITAN
       TTCN-3 Test Executor.

OPTIONS

The following options are supported (in alphabetical order):

-A file Forces the interpretation of file as an ASN.1 module. It is useful when
automatic module type detection fails due to some strange language constructs.
The option takes exactly one file name as argument. The option must be repeated
when used with multiple files. See also: option -T.

-a Force XER in ASN.1 files

-b Disables the generation of BER encoder/decoder routines for all ASN.1 types.

-B Allows the selected field in a union value to be unbound, when setting module
parameters (legacy behavior). A warning is displayed whenever a union value
receives an unbound selected field and when a union with an unbound selected
field is copied.

-c Write out checksums in case of error

-d Treat ASN.1 SEQUENCE/SET fields with DEFAULT values as omit in TTCN-3.

-D Disable generation of user and time information comments in the output C++ code.

-e Enforce legacy handling of encode and variant attributes.

-E Instructs the variant attribute parser to display warnings instead of errors for
unrecognized/erroneous attributes.

-f Forces the compiler to overwrite the output files even if they exist or are
unchanged.

-F Forces the compiler to generate the full C++ classes for records of/sets of
basic types (i.e. boolean, integer, float, bitstring, hexstring, octetstring,
charstring and unversal charstring). Otherwise only type aliases to pre-
generated classes are generated for these types. This also disables the type
compatibility between records of/sets of basic types in the Load Test Runtime.

-g The compiler error/warning messages will contain only the starting line number
and column, in a format compatible with th GNU compiler (gcc). -g takes
precedence over -i if both are specified.

-i The compiler error/warning messages will contain only the line numbers, the
column numbers will remain hidden. This option provides backward compatibility
with the error message format of earlier versions.

-I Enables real-time testing features.

-j Disables JSON encoder/decoder functions.

-J file Read a list of input files from the provided file.

-K file Enables selective code coverage.

-l Instructs the compiler to generate source file and line information (i.e. #line
directives) into the output C++ code so that the C++ compiler error messages
refer back to the lines of original TTCN-3 input module.
This option is obsolete and will be removed in future versions as the compiler
does not generate erroneous C++ code because of the full semantic analysis.

-L Instructs the compiler to add source file and line source file and line number
information into the generated code to be included in the log during execution.
This option is only a prerequisite for logging the source code information.
Options SourceInfoFormat and LogEntityName have also to be set appropriately in
section [LOGGING] of the run-time configuration file.
Usage of this option a bit enlarges the size of the generated code and slightly
reduces execution speed. This flag is not recommended when the TTCN-3 test suite
is used for load generation.

-M Allows the use of the value omit in template lists and complemented template
lists (legacy behavior). If set, an omitted field will match a template list,
if the value omit appears in the list, and it will match a complemented template
list, if omit is not in the list (the ifpresent attribute can still be used for
matching omitted fields). This also affects the ispresent operation and the
present template restriction accordingly.

-n Activates the debugger and generates extra code for storing debug information.

-N Ignore UNTAGGED encoding instruction on top level unions (legacy behaviour).

-o dir The output files (including Test Port skeletons) will be placed into the
directory specified by dir. The current working directory is the default
otherwise.

-p Instructs the compiler only to parse the given TTCN-3 and ASN.1 modules. This
will detect only the syntax errors because semantic checkings are not performed.
The presence of all imported modules is not necessary thus it is allowed (and
recommended) to parse the modules one-by-one.
All options that influence the code generation are silently ignored when used
together with -p.
Note: This option includes complete syntax checks for TTCN-3 modules, but in
ASN.1 there are some special constructs (e.g. the user-defined syntaxes) that
cannot be even parsed without semantic analysis. So there is no guarantee that
an ASN.1 module is free of syntax errors if it was analyzed with compiler using
the -p flag.

-P top_level_pdu...
Defines a top-level pdu. top_level_pdu must have the following format:
modulename.identifier. If this switch is used, then only the defined top-level
PDU(s) and the referenced assignments are checked and included in code
generation, the other ASN.1 assignments are skipped.

-q Quiet mode. Equivalent with -V 0.

-Qn Quits after n errors.

-r Disables the generation of RAW encoder/decoder routines for all TTCN-3 types.

-R Use function test runtime (TITAN_RUNTIME_2). The compiler will generate source
code for use with function test runtime.

-s Instructs the compiler to parse the given TTCN-3 and ASN.1 modules and perform
semantic analysis on them, but not to generate C++ output. The list of given
modules shall be complete so it is not allowed to import from a module that is
not in the list. All options that influence the code generation are silently
ignored when used together with -s.

-S Suppresses context information.

-t Generates Test Port skeleton header and source files for all port types that can
be found in TTCN-3 modules. Existing Test Port files will not be overwritten
unless the -f option is used.

-T file Forces the interpretation of file as a TTCN-3 module. See also: option -A.

-u Forces the compiler to do duplicate underscore characters in all output file
names. This option turns on the compatibility mode with versions 1.1 or earlier.

-U none|type|'number'
Selects code splitting mode for the generated C++ code. The 'number' should be
a positive number between 1 and 999999. If the 'number' is present the files
will be sliced into 'number' files.

-v Prints version and license key information and exits.

-V verb_level
Sets the verbosity bit-mask directly to verb_level (where verb_level is a
decimal value between 0 and 65535).

Meaning of bits:

1: "NOT SUPPORTED" messages.
2: WARNING messages.
4: NOTIFY messages.
32|16|8: DEBUG messages.
The debug-bits act like a 3-bits-length number, so the debug level has
a value between 0 and 7. It is useful in case of abnormal program
termination.

-w Suppresses all warning messages. Equivalent with -V 4.

-x Disables the generation of TEXT encoder/decoder routines for all TTCN-3 types.

-X Disable XER encoder/decoder functions

-y Disable subtype checking

-Y Enforces legacy behaviour of the "out" function parameters (see refguide).

-z file Enables profiling and code coverage in the selected TTCN-3 files. The file
argument contains a list of TTCN-3 files separated by new lines. Each TTCN-3
file must be among the compiler's TTCN-3 file arguments.

-0 Disables attribute checks for encvalue and decvalue. Must be used together with
option -s.

- The single dash character as command line argument controls the selective code
generation option. After the list of all TTCN-3 and ASN.1 modules a subset of
these files can be given separated by a dash. This option instructs the compiler
to parse all modules, perform the semantic analysis on the entire module
hierarchy, but generate code only for those modules that are listed after the
dash again.
It is not allowed to specify a file name after the dash that was not present in
the list before the dash. If the single dash is not present in the command line
the compiler will generate code for all modules.

--ttcn2json
Generates a JSON schema from the types defined in the specified TTCN-3 and ASN.1
modules. Must always be the first compiler option. From the previously listed
options only -T and -A can be used, instead the JSON schema generator has
options of its own:

-j Only types that have JSON coding enabled are included in the schema.

-f The schema only validates types that have a JSON encoding or decoding method
declared.

- file The single dash character as command line argument specifies the name of the
generated JSON schema file. If it is not present, then the schema file name is
generated from the name of the first input file (by replacing its suffix with
.json or appending .json to the end of the file).

EXIT STATUS

       The  compiler  exits  with  a  status  of  zero when no errors were encountered during its
       operation. A status of one will be returned if syntax or semantic errors were detected  in
       the input modules.

ENVIRONMENT VARIABLES

       TTCN3_DIR
              The  installation  directory  where  the uncompressed binary package of TTCN-3 Test
              Executor can be found.

       TTCN3_LICENSE_FILE
              It shall  point  to  the  file  (NB:  not  to  its  directory)  that  contains  the
              personalized license key for the current user or host.

BUGS

       The  compiler  does  not  support  all  constructs  of TTCN-3 Core Language and ASN.1.  It
       reports an error when encountering an unsupported language element.  The detailed list  of
       deficiencies and language extensions can be found in the referenced documentation.

       For trouble reporting use the tool MHWEB.  For TR writers guide please visit the web page:
       http://ttcn.ericsson.se.

AUTHOR

       This manpage is written by Janos Zoltan Szabo, Ericsson Telecom AB
       Copyright (c) 2000-2019 Ericsson Telecom AB
       All rights reserved. This program and the accompanying materials are made available  under
       the  terms  of the Eclipse Public License v2.0 which accompanies this distribution, and is
       available at
       https://www.eclipse.org/org/documents/epl-2.0/EPL-2.0.html