Provided by: gnutls-bin_3.6.13-2ubuntu1.11_amd64 bug

NAME

       gnutls-serv - GnuTLS server

SYNOPSIS

       gnutls-serv [-flags] [-flag [value]] [--option-name[[=| ]value]]

       All arguments must be options.

DESCRIPTION

       Server program that listens to incoming TLS connections.

OPTIONS

       -d number, --debug=number
              Enable  debugging.  This option takes an integer number as its argument.  The value
              of number is constrained to being:
                  in the range  0 through 9999

              Specifies the debug level.

       --sni-hostname=string
              Server's hostname for server name extension.

              Server name of type host_name that the server will recognise as its own. If the
              server receives client hello with different name, it will send a warning-level
              unrecognized_name alert.

       --sni-hostname-fatal
              Send fatal alert on sni-hostname mismatch.

       --alpn=string
              Specify ALPN protocol to be enabled by the server.  This option may appear an
              unlimited number of times.

              Specify the (textual) ALPN protocol for the server to use.

       --alpn-fatal
              Send fatal alert on non-matching ALPN name.

       --noticket
              Don't accept session tickets.

       --earlydata
              Accept early data.

       --maxearlydata=number
              The maximum early data size to accept.  This option takes an integer number as its
              argument.  The value of number is constrained to being:
                  in the range  1 through 4294967295

       --nocookie
              Don't require cookie on DTLS sessions.

       -g, --generate
              Generate Diffie-Hellman parameters.

       -q, --quiet
              Suppress some messages.

       --nodb Do not use a resumption database.

       --http Act as an HTTP server.

       --echo Act as an Echo server.

       -u, --udp
              Use DTLS (datagram TLS) over UDP.

       --mtu=number
              Set MTU for datagram TLS.  This option takes an integer number as its argument.
              The value of number is constrained to being:
                  in the range  0 through 17000

       --srtp-profiles=string
              Offer SRTP profiles.

       -a, --disable-client-cert
              Do not request a client certificate.  This option must not appear in combination
              with any of the following options: require-client-cert.

       -r, --require-client-cert
              Require a client certificate.

              This option before 3.6.0 used to imply --verify-client-cert.  Since 3.6.0 it will
              no longer verify the certificate by default.

       --verify-client-cert
              If a client certificate is sent then verify it..

              Do not require, but if a client certificate is sent then verify it and close the
              connection if invalid.

       -b, --heartbeat
              Activate heartbeat support.

              Regularly ping client via heartbeat extension messages

       --x509fmtder
              Use DER format for certificates to read from.

       --priority=string
              Priorities string.

              TLS algorithms and protocols to enable. You can use predefined sets of ciphersuites
              such as PERFORMANCE, NORMAL, SECURE128, SECURE256. The default is NORMAL.

              Check  the  GnuTLS  manual  on  section  “Priority strings” for more information on
              allowed keywords

       --dhparams=file
              DH params file to use.

       --x509cafile=string
              Certificate file or PKCS #11 URL to use.

       --x509crlfile=file
              CRL file to use.

       --pgpkeyfile=file
              PGP Key file to use.

              NOTE: THIS OPTION IS DEPRECATED

       --x509keyfile=string
              X.509 key file or PKCS #11 URL to use.  This option may appear an unlimited number
              of times.

              Specify the private key file or URI to use; it must correspond to the certificate
              specified in --x509certfile. Multiple keys and certificates can be specified with
              this option and in that case each occurrence of keyfile must be followed by the
              corresponding x509certfile or vice-versa.

       --x509certfile=string
              X.509 Certificate file or PKCS #11 URL to use.  This option may appear an unlimited
              number of times.

              Specify the certificate file or URI to use; it must correspond to the key specified
              in --x509keyfile. Multiple keys and certificates can be specified with this option
              and in that case each occurrence of keyfile must be followed by the corresponding
              x509certfile or vice-versa.

       --x509dsakeyfile
              This is an alias for the --x509keyfile option.

              NOTE: THIS OPTION IS DEPRECATED

       --x509dsacertfile
              This is an alias for the --x509certfile option.

              NOTE: THIS OPTION IS DEPRECATED

       --x509ecckeyfile
              This is an alias for the --x509keyfile option.

              NOTE: THIS OPTION IS DEPRECATED

       --x509ecccertfile
              This is an alias for the --x509certfile option.

              NOTE: THIS OPTION IS DEPRECATED

       --rawpkkeyfile=string
              Private key file (PKCS #8 or PKCS #12) or PKCS #11 URL to use.  This option may
              appear an unlimited number of times.

              Specify the private key file or URI to use; it must correspond to the raw public-
              key specified in --rawpkfile. Multiple key pairs can be specified with this option
              and in that case each occurrence of keyfile must be followed by the corresponding
              rawpkfile or vice-versa.

              In order to instruct the application to negotiate raw public keys one must enable
              the respective certificate types via the priority strings (i.e. CTYPE-CLI-* and
              CTYPE-SRV-* flags).

              Check  the  GnuTLS  manual  on  section  “Priority strings” for more information on
              how to set certificate types.

       --rawpkfile=string
              Raw public-key file to use.  This option may appear an unlimited number of times.
              This option must appear in combination with the following options: rawpkkeyfile.

              Specify the raw public-key file to use; it must correspond to the private key
              specified in --rawpkkeyfile. Multiple key pairs can be specified with this option
              and in that case each occurrence of keyfile must be followed by the corresponding
              rawpkfile or vice-versa.

              In order to instruct the application to negotiate raw public keys one must enable
              the respective certificate types via the priority strings (i.e. CTYPE-CLI-* and
              CTYPE-SRV-* flags).

              Check  the  GnuTLS  manual  on  section  “Priority strings” for more information on
              how to set certificate types.

       --srppasswd=file
              SRP password file to use.

       --srppasswdconf=file
              SRP password configuration file to use.

       --pskpasswd=file
              PSK password file to use.

       --pskhint=string
              PSK identity hint to use.

       --ocsp-response=string
              The OCSP response to send to client.  This option may appear an unlimited number of
              times.

              If the client requested an OCSP response, return data from this file to the client.

       --ignore-ocsp-response-errors
              Ignore any errors when setting the OCSP response.

              That option instructs gnutls to not attempt to match the provided OCSP responses
              with the certificates.

       -p number, --port=number
              The port to connect to.  This option takes an integer number as its argument.

       -l, --list
              Print a list of the supported algorithms and modes.

              Print a list of the supported algorithms and modes. If a priority string is given
              then only the enabled ciphersuites are shown.

       --provider=file
              Specify the PKCS #11 provider library.

              This will override the default options in /etc/gnutls/pkcs11.conf

       --keymatexport=string
              Label used for exporting keying material.

       --keymatexportsize=number
              Size of the exported keying material.  This option takes an integer number as its
              argument.

       --recordsize=number
              The maximum record size to advertise.  This option takes an integer number as its
              argument.  The value of number is constrained to being:
                  in the range  0 through 16384

       --httpdata=file
              The data used as HTTP response.

       -h, --help
              Display usage information and exit.

       -!, --more-help
              Pass the extended usage information through a pager.

       -v [{v|c|n --version [{v|c|n}]}]
              Output version of program and exit.  The default mode is `v', a simple version.
              The `c' mode will print copyright information and `n' will print the full copyright
              notice.

EXAMPLES

       Running your own TLS server based on GnuTLS can be useful when debugging clients and/or
       GnuTLS itself.  This section describes how to use gnutls-serv as a simple HTTPS server.

       The most basic server can be started as:

           gnutls-serv --http --priority "NORMAL:+ANON-ECDH:+ANON-DH"

       It will only support anonymous ciphersuites, which many TLS clients refuse to use.

       The next step is to add support for X.509.  First we generate a CA:

           $ certtool --generate-privkey > x509-ca-key.pem
           $ echo 'cn = GnuTLS test CA' > ca.tmpl
           $ echo 'ca' >> ca.tmpl
           $ echo 'cert_signing_key' >> ca.tmpl
           $ certtool --generate-self-signed --load-privkey x509-ca-key.pem   --template ca.tmpl --outfile x509-ca.pem

       Then generate a server certificate.  Remember to change the dns_name value to the name of
       your server host, or skip that command to avoid the field.

           $ certtool --generate-privkey > x509-server-key.pem
           $ echo 'organization = GnuTLS test server' > server.tmpl
           $ echo 'cn = test.gnutls.org' >> server.tmpl
           $ echo 'tls_www_server' >> server.tmpl
           $ echo 'encryption_key' >> server.tmpl
           $ echo 'signing_key' >> server.tmpl
           $ echo 'dns_name = test.gnutls.org' >> server.tmpl
           $ certtool --generate-certificate --load-privkey x509-server-key.pem   --load-ca-certificate x509-ca.pem --load-ca-privkey x509-ca-key.pem   --template server.tmpl --outfile x509-server.pem

       For use in the client, you may want to generate a client certificate as well.

           $ certtool --generate-privkey > x509-client-key.pem
           $ echo 'cn = GnuTLS test client' > client.tmpl
           $ echo 'tls_www_client' >> client.tmpl
           $ echo 'encryption_key' >> client.tmpl
           $ echo 'signing_key' >> client.tmpl
           $ certtool --generate-certificate --load-privkey x509-client-key.pem   --load-ca-certificate x509-ca.pem --load-ca-privkey x509-ca-key.pem   --template client.tmpl --outfile x509-client.pem

       To be able to import the client key/certificate into some applications, you will need to
       convert them into a PKCS#12 structure.  This also encrypts the security sensitive key with
       a password.

           $ certtool --to-p12 --load-ca-certificate x509-ca.pem   --load-privkey x509-client-key.pem --load-certificate x509-client.pem   --outder --outfile x509-client.p12

       For icing, we'll create a proxy certificate for the client too.

           $ certtool --generate-privkey > x509-proxy-key.pem
           $ echo 'cn = GnuTLS test client proxy' > proxy.tmpl
           $ certtool --generate-proxy --load-privkey x509-proxy-key.pem   --load-ca-certificate x509-client.pem --load-ca-privkey x509-client-key.pem   --load-certificate x509-client.pem --template proxy.tmpl   --outfile x509-proxy.pem

       Then start the server again:

           $ gnutls-serv --http             --x509cafile x509-ca.pem             --x509keyfile x509-server-key.pem             --x509certfile x509-server.pem

       Try connecting to the server using your web browser.  Note that the server listens to port
       5556 by default.

       While you are at it, to allow connections using ECDSA, you can also create a ECDSA key and
       certificate for the server.  These credentials will be used in the final example below.

           $ certtool --generate-privkey --ecdsa > x509-server-key-ecc.pem
           $ certtool --generate-certificate --load-privkey x509-server-key-ecc.pem   --load-ca-certificate x509-ca.pem --load-ca-privkey x509-ca-key.pem   --template server.tmpl --outfile x509-server-ecc.pem

       The next step is to add support for SRP authentication. This requires an SRP password file
       created with srptool.  To start the server with SRP support:

           gnutls-serv --http --priority NORMAL:+SRP-RSA:+SRP             --srppasswdconf srp-tpasswd.conf             --srppasswd srp-passwd.txt

       Let's also start a server with support for PSK. This would require a password file created
       with psktool.

           gnutls-serv --http --priority NORMAL:+ECDHE-PSK:+PSK             --pskpasswd psk-passwd.txt

       If you want a server with support for raw public-keys we can also add these credentials.
       Note however that there is no identity information linked to these keys as is the case
       with regular x509 certificates. Authentication must be done via different means. Also we
       need to explicitly enable raw public-key certificates via the priority strings.

           gnutls-serv --http --priority NORMAL:+CTYPE-CLI-RAWPK:+CTYPE-SRV-RAWPK             --rawpkfile srv.rawpk.pem             --rawpkkeyfile srv.key.pem

       Finally, we start the server with all the earlier parameters and you get this command:

           gnutls-serv --http --priority NORMAL:+PSK:+SRP:+CTYPE-CLI-RAWPK:+CTYPE-SRV-RAWPK             --x509cafile x509-ca.pem             --x509keyfile x509-server-key.pem             --x509certfile x509-server.pem             --x509keyfile x509-server-key-ecc.pem             --x509certfile x509-server-ecc.pem             --srppasswdconf srp-tpasswd.conf             --srppasswd srp-passwd.txt             --pskpasswd psk-passwd.txt             --rawpkfile srv.rawpk.pem             --rawpkkeyfile srv.key.pem

EXIT STATUS

       One of the following exit values will be returned:

       0  (EXIT_SUCCESS)
              Successful program execution.

       1  (EXIT_FAILURE)
              The operation failed or the command syntax was not valid.

       70  (EX_SOFTWARE)
              libopts had an internal operational error.  Please report it to autogen-
              users@lists.sourceforge.net.  Thank you.

SEE ALSO

       gnutls-cli-debug(1), gnutls-cli(1)

AUTHORS

       Nikos Mavrogiannopoulos, Simon Josefsson and others; see /usr/share/doc/gnutls/AUTHORS for
       a complete list.

COPYRIGHT

       Copyright (C) 2000-2024 Free Software Foundation, and others all rights reserved.  This
       program is released under the terms of the GNU General Public License, version 3 or later.

BUGS

       Please send bug reports to: bugs@gnutls.org

NOTES

       This manual page was AutoGen-erated from the gnutls-serv option definitions.