Provided by: gdc-9-mips-linux-gnu_9.4.0-1ubuntu1~20.04cross1_amd64 
NAME
gdc - A GCC-based compiler for the D language
SYNOPSIS
gdc [-c|-S] [-g] [-pg]
[-Olevel] [-Wwarn...]
[-Idir...] [-Ldir...]
[-foption...] [-mmachine-option...]
[-o outfile] [@file] infile...
Only the most useful options are listed here; see below for the remainder.
DESCRIPTION
The gdc command is the GNU compiler for the D language and supports many of the same options as gcc.
This manual only documents the options specific to gdc.
OPTIONS
Input and Output files
For any given input file, the file name suffix determines what kind of compilation is done. The
following kinds of input file names are supported:
file.d
D source files.
file.dd
Ddoc source files.
file.di
D interface files.
You can specify more than one input file on the gdc command line, each being compiled separately in the
compilation process. If you specify a "-o file" option, all the input files are compiled together,
producing a single output file, named file. This is allowed even when using "-S" or "-c".
A D interface file contains only what an import of the module needs, rather than the whole implementation
of that module. They can be created by gdc from a D source file by using the "-H" option. When the
compiler resolves an import declaration, it searches for matching .di files first, then for .d.
A Ddoc source file contains code in the D macro processor language. It is primarily designed for use in
producing user documentation from embedded comments, with a slight affinity towards HTML generation. If
a .d source file starts with the string "Ddoc" then it is treated as general purpose documentation, not
as a D source file.
Runtime Options
These options affect the runtime behavior of programs compiled with gdc.
-fall-instantiations
Generate code for all template instantiations. The default template emission strategy is to not
generate code for declarations that were either instantiated speculatively, such as from
"__traits(compiles, ...)", or that come from an imported module not being compiled.
-fno-assert
Turn off code generation for "assert" contracts.
-fno-bounds-check
Turns off array bounds checking for all functions, which can improve performance for code that uses
arrays extensively. Note that this can result in unpredictable behavior if the code in question
actually does violate array bounds constraints. It is safe to use this option if you are sure that
your code never throws a "RangeError".
-fbounds-check=value
An alternative to -fbounds-check that allows more control as to where bounds checking is turned on or
off. The following values are supported:
on Turns on array bounds checking for all functions.
safeonly
Turns on array bounds checking only for @safe functions.
off Turns off array bounds checking completely.
-fno-builtin
Don't recognize built-in functions unless they begin with the prefix __builtin_. By default, the
compiler will recognize when a function in the "core.stdc" package is a built-in function.
-fdebug
-fdebug=value
Turn on compilation of conditional "debug" code into the program. The -fdebug option itself sets the
debug level to 1, while -fdebug= enables "debug" code that are identified by any of the following
values:
level
Sets the debug level to level, any "debug" code <= level is compiled into the program.
ident
Turns on compilation of any "debug" code identified by ident.
-fno-druntime
Implements <https://dlang.org/spec/betterc.html>. Assumes that compilation targets an environment
without a D runtime library.
This is equivalent to compiling with the following options:
gdc -nophoboslib -fno-exceptions -fno-moduleinfo -fno-rtti
-fno-invariants
Turns off code generation for class "invariant" contracts.
-fno-moduleinfo
Turns off generation of the "ModuleInfo" and related functions that would become unreferenced without
it, which may allow linking to programs not written in D. Functions that are not be generated
include module constructors and destructors ("static this" and "static ~this"), "unittest" code, and
"DSO" registry functions for dynamically linked code.
-fonly=filename
Tells the compiler to parse and run semantic analysis on all modules on the command line, but only
generate code for the module specified by filename.
-fno-postconditions
Turns off code generation for postcondition "out" contracts.
-fno-preconditions
Turns off code generation for precondition "in" contracts.
-frelease
Turns on compiling in release mode, which means not emitting runtime checks for contracts and
asserts. Array bounds checking is not done for @system and @trusted functions, and assertion
failures are undefined behavior.
This is equivalent to compiling with the following options:
gdc -fno-assert -fbounds-check=safe -fno-invariants \
-fno-postconditions -fno-preconditions -fno-switch-errors
-fno-rtti
Turns off generation of run-time type information for all user defined types. Any code that uses
features of the language that require access to this information will result in an error.
-fno-switch-errors
This option controls what code is generated when no case is matched in a "final switch" statement.
The default run time behavior is to throw a "SwitchError". Turning off -fswitch-errors means that
instead the execution of the program is immediately halted.
-funittest
Turns on compilation of "unittest" code, and turns on the "version(unittest)" identifier. This
implies -fassert.
-fversion=value
Turns on compilation of conditional "version" code into the program identified by any of the
following values:
level
Sets the version level to level, any "version" code >= level is compiled into the program.
ident
Turns on compilation of "version" code identified by ident.
-fno-weak
Turns off emission of instantiated declarations that can be defined in multiple objects as weak or
one-only symbols. The default is to emit all public symbols as weak, unless the target lacks support
for weak symbols. Disabling this option means that common symbols are instead put in COMDAT or
become private.
Options for Directory Search
These options specify directories to search for files, libraries, and other parts of the compiler:
-Idir
Specify a directory to use when searching for imported modules at compile time. Multiple -I options
can be used, and the paths are searched in the same order.
-Jdir
Specify a directory to use when searching for files in string imports at compile time. This switch
is required in order to use "import(file)" expressions. Multiple -J options can be used, and the
paths are searched in the same order.
-Ldir
When linking, specify a library search directory, as with gcc.
-Bdir
This option specifies where to find the executables, libraries, source files, and data files of the
compiler itself, as with gcc.
-fmodule-file=module=spec
This option manipulates file paths of imported modules, such that if an imported module matches all
or the leftmost part of module, the file path in spec is used as the location to search for D
sources. This is used when the source file path and names are not the same as the package and module
hierarchy. Consider the following examples:
gdc test.d -fmodule-file=A.B=foo.d -fmodule-file=C=bar
This will tell the compiler to search in all import paths for the source file foo.d when importing
A.B, and the directory bar/ when importing C, as annotated in the following D code:
module test;
import A.B; // Matches A.B, searches for foo.d
import C.D.E; // Matches C, searches for bar/D/E.d
import A.B.C; // No match, searches for A/B/C.d
-imultilib dir
Use dir as a subdirectory of the gcc directory containing target-specific D sources and interfaces.
-iprefix prefix
Specify prefix as the prefix for the gcc directory containing target-specific D sources and
interfaces. If the prefix represents a directory, you should include the final '/'.
-nostdinc
Do not search the standard system directories for D source and interface files. Only the directories
that have been specified with -I options (and the directory of the current file, if appropriate) are
searched.
Code Generation
In addition to the many gcc options controlling code generation, gdc has several options specific to
itself.
-H Generates D interface files for all modules being compiled. The compiler determines the output file
based on the name of the input file, removes any directory components and suffix, and applies the .di
suffix.
-Hd dir
Same as -H, but writes interface files to directory dir. This option can be used with -Hf file to
independently set the output file and directory path.
-Hf file
Same as -H but writes interface files to file. This option can be used with -Hd dir to independently
set the output file and directory path.
-M Output the module dependencies of all source files being compiled in a format suitable for make. The
compiler outputs one make rule containing the object file name for that source file, a colon, and the
names of all imported files.
-MM Like -M but does not mention imported modules from the D standard library package directories.
-MF file
When used with -M or -MM, specifies a file to write the dependencies to. When used with the driver
options -MD or -MMD, -MF overrides the default dependency output file.
-MG This option is for compatibility with gcc, and is ignored by the compiler.
-MP Outputs a phony target for each dependency other than the modules being compiled, causing each to
depend on nothing.
-MT target
Change the target of the rule emitted by dependency generation to be exactly the string you specify.
If you want multiple targets, you can specify them as a single argument to -MT, or use multiple -MT
options.
-MQ target
Same as -MT, but it quotes any characters which are special to make.
-MD This option is equivalent to -M -MF file. The driver determines file by removing any directory
components and suffix from the input file, and then adding a .deps suffix.
-MMD
Like -MD but does not mention imported modules from the D standard library package directories.
-X Output information describing the contents of all source files being compiled in JSON format to a
file. The driver determines file by removing any directory components and suffix from the input
file, and then adding a .json suffix.
-Xf file
Same as -X, but writes all JSON contents to the specified file.
-fdoc
Generates "Ddoc" documentation and writes it to a file. The compiler determines file by removing any
directory components and suffix from the input file, and then adding a .html suffix.
-fdoc-dir=dir
Same as -fdoc, but writes documentation to directory dir. This option can be used with
-fdoc-file=file to independently set the output file and directory path.
-fdoc-file=file
Same as -fdoc, but writes documentation to file. This option can be used with -fdoc-dir=dir to
independently set the output file and directory path.
-fdoc-inc=file
Specify file as a Ddoc macro file to be read. Multiple -fdoc-inc options can be used, and files are
read and processed in the same order.
Warnings
Warnings are diagnostic messages that report constructions that are not inherently erroneous but that are
risky or suggest there is likely to be a bug in the program. Unless -Werror is specified, they do not
prevent compilation of the program.
-Wall
Turns on all warnings messages. Warnings are not a defined part of the D language, and all
constructs for which this may generate a warning message are valid code.
-Walloca
This option warns on all uses of "alloca" in the source.
-Walloca-larger-than=n
Warn on unbounded uses of alloca, and on bounded uses of alloca whose bound can be larger than n
bytes. -Wno-alloca-larger-than disables -Walloca-larger-than warning and is equivalent to
-Walloca-larger-than=SIZE_MAX or larger.
-Wcast-result
Warn about casts that will produce a null or zero result. Currently this is only done for casting
between an imaginary and non-imaginary data type, or casting between a D and C++ class.
-Wno-deprecated
Do not warn about usage of deprecated features and symbols with "deprecated" attributes.
-Werror
Turns all warnings into errors.
-Wspeculative
List all error messages from speculative compiles, such as "__traits(compiles, ...)". This option
does not report messages as warnings, and these messages therefore never become errors when the
-Werror option is also used.
-Wtemplates
Warn when a template instantiation is encountered. Some coding rules disallow templates, and this
may be used to enforce that rule.
-Wunknown-pragmas
Warn when a "pragma()" is encountered that is not understood by gdc. This differs from
-fignore-unknown-pragmas where a pragma that is part of the D language, but not implemented by the
compiler, won't get reported.
-fignore-unknown-pragmas
Turns off errors for unsupported pragmas.
-fmax-errors=n
Limits the maximum number of error messages to n, at which point gdc bails out rather than attempting
to continue processing the source code. If n is 0 (the default), there is no limit on the number of
error messages produced.
-fsyntax-only
Check the code for syntax errors, but do not actually compile it. This can be used in conjunction
with -fdoc or -H to generate files for each module present on the command-line, but no other output
file.
-ftransition=id
Report additional information about D language changes identified by id. The following values are
supported:
all List information on all language changes.
checkimports
Give deprecation messages about -ftransition=import anomalies.
complex
List all usages of complex or imaginary types.
dip1000
Implements <http://wiki.dlang.org/DIP1000> (experimental).
dip25
Implements <http://wiki.dlang.org/DIP25> (experimental).
field
List all non-mutable fields which occupy an object instance.
import
Tells the compiler to revert to using an old lookup behavior for resolving unqualified symbol
names, where this was done in a single pass, ignoring any protection attributes. The default
name lookup strategy is to use two passes, the first ignoring imported declarations, and the
second only looking at imports. The protection ("private", "package", "protected") of symbols is
also enforced to resolve any conflicts between private and public symbols.
nogc
List all hidden GC allocations.
tls List all variables going into thread local storage.
Options for Linking
These options come into play when the compiler links object files into an executable output file. They
are meaningless if the compiler is not doing a link step.
-defaultlib libname
Specify the library to use instead of libphobos when linking. Options specifying the linkage of
libphobos, such as -static-libphobos or -shared-libphobos, are ignored.
-debuglib
Specify the debug library to use instead of libphobos when linking. This option has no effect unless
the -g option was also given on the command line. Options specifying the linkage of libphobos, such
as -static-libphobos or -shared-libphobos, are ignored.
-nophoboslib
Do not use the Phobos or D runtime library when linking. Options specifying the linkage of
libphobos, such as -static-libphobos or -shared-libphobos, are ignored. The standard system
libraries are used normally, unless -nostdlib or -nodefaultlibs is used.
-shared-libphobos
On systems that provide libgphobos and libgdruntime as a shared and a static library, this option
forces the use of the shared version. If no shared version was built when the compiler was
configured, this option has no effect.
-static-libphobos
On systems that provide libgphobos and libgdruntime as a shared and a static library, this option
forces the use of the static version. If no static version was built when the compiler was
configured, this option has no effect.
Developer Options
This section describes command-line options that are primarily of interest to developers or language
tooling.
-fdump-d-original
Output the internal front-end AST after the "semantic3" stage. This option is only useful for
debugging the GNU D compiler itself.
-v Dump information about the compiler language processing stages as the source program is being
compiled. This includes listing all modules that are processed through the "parse", "semantic",
"semantic2", and "semantic3" stages; all "import" modules and their file paths; and all "function"
bodies that are being compiled.
SEE ALSO
gpl(7), gfdl(7), fsf-funding(7), gcc(1) and the Info entries for gdc and gcc.
COPYRIGHT
Copyright (c) 2006-2019 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free
Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with
no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included
in the man page gfdl(7).