Provided by: routino_3.3.2-1_amd64 
NAME
routino-router-slim - calculate routes using the routino database
SYNOPSIS
routino-router-slim [--version] [--help | --help-profile-xml | --help-profile-json | --help-profile-perl]
[--dir=dirname] [--prefix=name] [--profiles=filename] [--translations=filename]
[--exact-nodes-only] [--quiet] [--loggable] [--logtime] [--logmemory]
[--language=lang] [--output-html] [--output-gpx-track] [--output-gpx-route]
[--output-text] [--output-text-all] [--output-none] [--output-stdout]
[--profile=name] [--transport=transport] [--shortest | --quickest] --lon1=longitude
--lat1=latitude --lon2=longitude --lat2=latitude [... --lon99=longitude
--lat99=latitude] [--reverse] [--loop] [--highway-<highway>=preference ...]
[--speed-<highway>=speed ...] [--property-<property>=preference ...] [--oneway=0|1]
[--turns=0|1] [--weight=weight] [--height=height] [--width=width] [--length=length]
DESCRIPTION
routino-router-slim performs the calculation of the optimum routes using the database generated by the
planetsplitter(1) program.
OPTIONS
--version
Print the version of Routino.
--help Prints out the help information.
--help-profile
Prints out the selected transport profile (type, speed limits, highway preferences etc.)
--help-profile-xml
Prints out all the loaded profiles as an XML file in the same format that can be loaded in.
--help-profile-json
Prints out all the loaded profiles in JavaScript Object Notation (JSON) format for use in the
interactive webpage.
--help-profile-perl
Prints out all the loaded profiles as a Perl object for use in the router CGI.
--dir=dirname
Sets the directory name in which to read the local database. Defaults to the current directory.
--prefix=name
Sets the filename prefix for the files in the local database. Defaults to no prefix.
--profiles=filename
Sets the filename containing the list of routing profiles in XML format. If the file doesn't
exist then --dirname, --prefix and "profiles.xml" will be combined and used, if that doesn't exist
then the file /usr/share/routino/profiles.xml (or custom installation location) will be used.
--translations=filename
Sets the filename containing the list of translations in XML format for the output files. If the
file doesn't exist then --dirname, --prefix and "translations.xml" will be combined and used, if
that doesn't exist then the file /usr/share/routino/translations.xml (or custom installation
location) will be used.
--exact-nodes-only
When processing the specified latitude and longitude points only select the nearest node instead
of finding the nearest point within a segment (quicker but less accurate unless the points are
already near nodes).
--quiet
Don't generate any screen output while running (useful for running in a script).
--loggable
Print progress messages that are suitable for logging to a file; normally an incrementing counter
is printed which is more suitable for real-time display than logging.
--logtime
Print the elapsed time for each processing step (minutes, seconds and milliseconds).
--logmemory
Print the maximum allocated and mapped memory for each processing step (MBytes).
--language=lang
Select the language specified from the file of translations. If this option is not given and the
file exists then the first language in the file will be used. If this option is not given and no
file exists the compiled-in default language (English) will be used.
--output-html, --output-gpx-track, --output-gpx-route, --output-text, --output-text-all
Generate the selected output file formats (HTML, GPX track file, GPX route file, plain text route
and/or plain text with all nodes). If no output is specified then all are generated, specifying
any automatically disables those not specified.
--output-none
Do not generate any output or read in any translations files.
--output-stdout
Write to stdout instead of a file (requires exactly one output format option, implies --quiet).
--profile=name
Specifies the name of the profile to use.
--transport=transport
Select the type of transport to use, transport can be set to:
foot = Foot
horse = Horse
wheelchair = Wheelchair
bicycle = Bicycle
moped = Moped (Small motorcycle,
limited speed)
motorcycle = Motorcycle
motorcar = Motorcar
goods = Goods (Small lorry, van)
hgv = HGV (Heavy Goods Vehicle \-
large lorry)
psv = PSV (Public Service Vehicle
\- bus, coach)
Defaults to 'motorcar', this option also selects the default profile information if the --profile
option is not given and a profile matching the transport name is found.
--shortest
Find the shortest route between the waypoints.
--quickest
Find the quickest route between the waypoints.
--lon1=longitude, --lat1=latitude, --lon2=longitude, --lat2=latitude, ... --lon99=longitude,
--lat99=latitude
The location of the waypoints that make up the start, middle and end points of the route. Up to 99
waypoints can be specified and the route will pass through each of the specified ones in sequence.
The algorithm will use the closest node or point within a segment that allows the specified
traffic type.
--reverse
Find a route between the waypoints in reverse order.
--loop Find a route that returns to the first waypoint after the last one.
--heading=bearing
Specifies the initial direction of travel at the start of the route (from the lowest numbered
waypoint) as a compass bearing from 0 to 360 degrees.
--highway-<highway>=preference
Selects the percentage preference for using each particular type of highway. The value of highway
can be selected from:
motorway = Motorway
trunk = Trunk
primary = Primary
secondary = Secondary
tertiary = Tertiary
unclassified = Unclassified
residential = Residential
service = Service
track = Track
cycleway = Cycleway
path = Path
steps = Steps
ferry = Ferry
Default value depends on the profile selected by the --transport option.
--speed-<highway>=speed
Selects the speed limit in km/hour for each type of highway. Default value depends on the profile
selected by the --transport option.
--property-<property>=preference
Selects the percentage preference for using each particular highway property. The value of
property can be selected from:
paved = Paved (suitable for normal
wheels)
multilane = Multiple lanes
bridge = Bridge
tunnel = Tunnel
footroute = A route marked for foot
travel
bicycleroute = A route marked for bicycle
travel
Default value depends on the profile selected by the --transport option.
--oneway==0|1
Selects if the direction of oneway streets are to be obeyed (useful to not obey them when
walking). Default value depends on the profile selected by the --transport option.
--turns==0|1
Selects if turn restrictions are to be obeyed (useful to not obey them when walking). Default
value depends on the profile selected by the --transport option.
--weight=weight
Specifies the weight of the mode of transport in tonnes; ensures that the weight limit on the
highway is not exceeded. Default value depends on the profile selected by the --transport option.
--height=height
Specifies the height of the mode of transport in metres; ensures that the height limit on the
highway is not exceeded. Default value depends on the profile selected by the --transport option.
--width=width
Specifies the width of the mode of transport in metres; ensures that the width limit on the
highway is not exceeded. Default value depends on the profile selected by the --transport option.
--length=length
Specifies the length of the mode of transport in metres; ensures that the length limit on the
highway is not exceeded. Default value depends on the profile selected by the --transport option.
The meaning of the preference parameter in the command line options is slightly different for the highway
preferences and the property preferences. For the highway preference consider the choice between two
possible highways between the start and finish when looking for the shortest route. If highway A has a
preference of 100% and highway B has a preference of 90% then highway A will be chosen even if it is up
to 11% longer (100/90 = 111%). For the highway properties each highway either has a particular property
or not. If the preference for the property is 60% then a highway with the property has a preference of
77% (sqrt(60%)) and one without has a preference of 63% (sqrt(100-60%)). A highway with the property
will be chosen even if it is up to 22% longer than one without the property (77/63 = 122%). The overall
preference for each highway segment is the product of the preference for the highway type and all of the
preferences for the highway properties.
EXAMPLES
Example usage (motorcycle journey, scenic route, not very fast):
routino-router-slim --dir=data --prefix=gb --transport=motorcycle \
--highway-motorway=0 --highway-trunk=0 \
--speed-primary=80 --speed-secondary=80 \
--quickest
This will use the files data/gb-nodes.mem, data/gb-segments.mem and data/gb-ways.mem to find the quickest
route by motorcycle not using motorways or trunk roads and not exceeding 80 km/hr.
19 September 2019 routino-router-slim(1)