Provided by: swift_2.25.2-0ubuntu1.1_all 
NAME
swift-ring-builder - OpenStack Swift ring builder
SYNOPSIS
swift-ring-builder <builder_file> <commands> <arguments> <...>
DESCRIPTION
The swift-ring-builder utility is used to create, search and manipulate the swift storage ring. The ring-
builder assigns partitions to devices and writes an optimized Python structure to a gzipped, pickled file
on disk for shipping out to the servers. The server processes just check the modification time of the
file occasionally and reload their in-memory copies of the ring structure as needed. Because of how the
ring-builder manages changes to the ring, using a slightly older ring usually just means one of the three
replicas for a subset of the partitions will be incorrect, which can be easily worked around.
The ring-builder also keeps its own builder file with the ring information and additional data required
to build future rings. It is very important to keep multiple backup copies of these builder files. One
option is to copy the builder files out to every server while copying the ring files themselves. Another
is to upload the builder files into the cluster itself. Complete loss of a builder file will mean
creating a new ring from scratch, nearly all partitions will end up assigned to different devices, and
therefore nearly all data stored will have to be replicated to new locations. So, recovery from a builder
file loss is possible, but data will definitely be unreachable for an extended time.
If invoked as 'swift-ring-builder-safe' the directory containing the builder file provided will be locked
(via a .lock file in the files parent directory). This provides a basic safe guard against multiple
instances of the swift-ring-builder (or other utilities that observe this lock) from attempting to write
to or read the builder/ring files while operations are in progress. This can be useful in environments
where ring management has been automated but the operator still needs to interact with the rings
manually.
SEARCH
<search-value>
Can be of the form:
d<device_id>r<region>z<zone>-<ip>:<port>/<device_name>_<meta>
Any part is optional, but you must include at least one, examples:
d74 Matches the device id 74
z1 Matches devices in zone 1
z1-1.2.3.4 Matches devices in zone 1 with the ip 1.2.3.4
1.2.3.4 Matches devices in any zone with the ip 1.2.3.4
r1z1:5678 Matches devices in zone 1 present in region 1 using port 5678
z1:5678 Matches devices in zone 1 using port 5678
:5678 Matches devices that use port 5678
/sdb1 Matches devices with the device name sdb1
_shiny Matches devices with shiny in the meta data
_'snet: 5.6.7.8' Matches devices with snet: 5.6.7.8 in the meta data
[::1] Matches devices in any zone with the ip ::1
z1-[::1]:5678 Matches devices in zone 1 with ip ::1 and port 5678
Most specific example:
d74z1-1.2.3.4:5678/sdb1_"snet: 5.6.7.8"
Nerd explanation:
All items require their single character prefix except the ip, in which case the - is optional
unless the device id or zone is also included.
OPTIONS
-y, --yes
Assume a yes response to all questions
COMMANDS
<builder_file>
Shows information about the ring and the devices within.
search <search-value>
Shows information about matching devices.
add z<zone>-<ip>:<port>/<device_name>_<meta> <weight>
add r<region>z<zone>-<ip>:<port>/<device_name>_<meta> <weight>
add -r <region> -z <zone> -i <ip> -p <port> -d <device_name> -m <meta> -w <weight>
Adds a device to the ring with the given information. No partitions will be assigned to the new
device until after running 'rebalance'. This is so you can make multiple device changes and
rebalance them all just once.
create <part_power> <replicas> <min_part_hours>
Creates <builder_file> with 2^<part_power> partitions and <replicas>. <min_part_hours> is number of
hours to restrict moving a partition more than once.
list_parts <search-value> [<search-value>] ..
Returns a 2 column list of all the partitions that are assigned to any of the devices matching the
search values given. The first column is the assigned partition number and the second column is the
number of device matches for that partition. The list is ordered from most number of matches to
least. If there are a lot of devices to match against, this command could take a while to run.
rebalance
Attempts to rebalance the ring by reassigning partitions that haven't been recently reassigned.
remove <search-value>
Removes the device(s) from the ring. This should normally just be used for a device that has failed.
For a device you wish to decommission, it's best to set its weight to 0, wait for it to drain all
its data, then use this remove command. This will not take effect until after running 'rebalance'.
This is so you can make multiple device changes and rebalance them all just once.
set_info <search-value> <ip>:<port>/<device_name>_<meta>
Resets the device's information. This information isn't used to assign partitions, so you can use
'write_ring' afterward to rewrite the current ring with the newer device information. Any of the
parts are optional in the final <ip>:<port>/<device_name>_<meta> parameter; just give what you want
to change. For instance set_info d74 _"snet: 5.6.7.8" would just update the meta data for device id
74.
set_min_part_hours <hours>
Changes the <min_part_hours> to the given <hours>. This should be set to however long a full
replication/update cycle takes. We're working on a way to determine this more easily than scanning
logs.
set_weight <search-value> <weight>
Resets the device's weight. No partitions will be reassigned to or from the device until after
running 'rebalance'. This is so you can make multiple device changes and rebalance them all just
once.
validate
Just runs the validation routines on the ring.
write_ring
Just rewrites the distributable ring file. This is done automatically after a successful rebalance,
so really this is only useful after one or more 'set_info' calls when no rebalance is needed but you
want to send out the new device information.
Quick list: add create list_parts rebalance remove search set_info
set_min_part_hours set_weight validate write_ring
Exit codes: 0 = ring changed, 1 = ring did not change, 2 = error
DOCUMENTATION
More in depth documentation about the swift ring and also OpenStack Swift as a whole can be found at
https://docs.openstack.org/swift/latest/overview_ring.html
https://docs.openstack.org/swift/latest/admin_guide.html#managing-the-rings and
https://docs.openstack.org/swift/latest/