Provided by: timidity_2.14.0-8build1_amd64 
NAME
TiMidity++ - MIDI-to-WAVE converter and player
SYNOPSIS
timidity [options] filename [...]
DESCRIPTION
TiMidity++ is a converter that converts some of MIDI files (supported formats: Standard MIDI files
(*.mid), Recomposer files (*.rcp, *.r36, *.g18, *.g36) and Module files (*.mod)) into formatted audio
files (e.g. RIFF WAVE). TiMidity++ uses Gravis Ultrasound-compatible patch files or Soundfonts (*.sfx,
*.sf2) to generate digital audio data from MIDI files. The digital audio data generated by TiMidity++
can be stored in a file for processing, or played in real time through an audio device.
In real time playing, TiMidity++ can show the lyrics contained in KAR or WRD files.
FILENAME
You can use the following expressions as the filename argument:
- Read a MIDI file from standard input.
path/filename
Read a MIDI file from the specified path on a filesystem.
dir:directory
directory/
Read and play all MIDI files in the specified directory. For example,
% timidity some/where/
plays all files in the directory some/where/.
Archive File
Extract and play the file(s) in the archive. If you want to specify a certain MIDI file in the
archive, append #<MIDI-filename> to the archive name. The path after `#' allows the use of the
wildcard expressions (case insensitive).
You can use escape sequence \xHH, where `HH' is a ASCII number in hexadecimal integer.
For example:
% timidity file.zip#file.mid
Plays file.mid in file.zip
% timidity file.lzh#*.mid
Plays any files that match the wildcard expression *.mid in file.lzh
% timidity file.tgz#*
This expression is the same as file.tgz
Since these mechanism are contained in TiMidity++ itself, you can use this syntax even in the MS
Windows environment.
TiMidity++ can handle the following archive formats:
tar (*.tar)
tar+gzip (*.tar.gz, *.tgz)
zip (*.zip)
lzh (*.lzh, *.lha)
(lh0, lh1, lh2, lh3, lh4, lh5, lh6, lz4, lzs and lz5 are available)
Other archives can be expanded if expander command is specified on the compile phase. TiMidity++
will pipe that command.
news://news-server[:port]/Message-ID
news://news-server[:port]/newsgroup[/first-last]
Play the MIDI file in the specified article on the news server. If a newsgroup is specified
TiMidity++ plays all MIDI files found in any article posted to that newsgroup.
TiMidity++ parses MIME Multi-part messages in case of news://* scheme, extracts MIDI file that was
post to that group, or in case of normal file, you can explicitly handle MIME documents by naming
that file with *.mime extension, or prefix that file with mime:
The following MIME-types are allowed:
uu-encoded file
begin
is required
base64 encoded
Content-Transfer-Encoding: base64
is required
quoted-string
Content-Transfer-Encoding: quoted-string
is required
Mac BinHex format
only HQX format is available
http://address
ftp://address
Play the file specified in the URL.
For example:
% timidity http://www.goice.co.jp/member/mo/dist/midi/impromptu.mid
plays the specified MIDI-file directly from the network.
If these expression are used in the *.cfg files, you can even use patch-files (and others) from
remote machines.
INPUT FILE
TiMidity++ can handle the following file formats:
.mid, .rmi (Format 0, 1, 2)
Standard MIDI File
.rcp, .r36, .g18, .g36 (Recomposer formats)
Recomposer format which is product for COME ON MUSIC co.
.mfi (MFi Version 3 - Melody Format for i-Mode)
i-Mode is Japanese local mobile phone
.kar (Karaoke format)
Displays the lyrics as a Lyric Meta Event message.
.mod, mod.* (Module file)
.wrd (WRD format)
OPTIONS
The following command line options are accepted by TiMidity++:
-A [n][,m](a)
--amplification=n
--drumpower=m
--[no-]volume-compensation
Multiplies the master volume by n%. Default value is 70%. Higher amplification makes louder
sounds. You can specify the drum power, ratio of drum volume from the other channels. The
allowed values of amplification range from 0 (no sound) to 800.
Optionally to put `a' character along with -a option, or to use --volume-compensation, instructs
TiMidity++ to regularize the volume. You can easily gain dynamic range.
For example:
-A90 volume 90%, drum power 100%, compensation is off
-A,120 volume 70%, drum power 120%, compensation is off
-A90,120
volume 90%, drum power 120%, compensation is off
-Aa volume 70%, drum power 100%, compensation is on
-A90a volume 90%, drum power 100%, compensation is on
-A,120a
volume 70%, drum power 120%, compensation is on
-A90,120a
volume 90%, drum power 120%, compensation is on
-a, --[no-]anti-alias
Turns on anti-aliasing. Samples are run through a lowpass filter before playing, which reduces
aliasing noise at low resampling frequencies.
-B n,m, --buffer-fragments=n,m
For the Linux/FreeBSD/OSS/ALSA/Windows sound driver, selects the number of buffer fragments in
interactive mode. Increasing the number of fragments may reduce choppiness when many processes
are running. It will make TiMidity++ seem to respond sluggishly to fast forward, rewind, and
volume controls, and it will throw the status display off sync. Specify a fragments number of 0
to use the maximum number of fragments available.
-C n, --control-ratio=n
Sets the ratio of sampling and control frequencies. This determines how often envelopes are
recalculated -- small ratios yield better quality but use more CPU time.
-c file, --config-file=file
Reads an extra configuration file.
-D n, --drum-channel=n
Marks channel as a drum channel. If channel is negative, channel -n is marked as an instrumental
channel. If n is 0, all channels are marked as instrumental.
-d dir, --interface-path=dir
Specifies the directory containing installed dynamic-link interface modules.
-E mode, --ext=mode
Set TiMidity++ extend modes. The following modes are available (capitalized switch means disable
this feature):
w/W, --[no-]mod-wheel
Enable/disable modulation controlling.
p/P, --[no-]portamento
Enable/disable portamento controlling.
v/V, --[no-]vibrato
Enable/disable NRPM vibration.
s/S, --[no-]ch-pressure
Enable/disable channel pressure controlling.
e/E, --[no-]mod-envelope
Enable/disable modulation envelope controlling.
t/T, --[no-]trace-text-meta
Enable/disable tracing all Text Meta Events.
o/O, --[no-]overlap-voice
Accept/reject pronouncing multiple same notes.
z/Z, --[no-]temper-control
Enable/disable MIDI Tuning Standard temperament controlling.
mHH, --default-mid=HH
Sets the manufacturer ID to HH (where HH are two hex-digits).
HH values of GS/gs, XG/xg or GM/gm are understood as 41, 43 and 7e respectively.
MHH, --system-mid=HH
Sets the system manufacturer ID to HH (where HH are two hex-digits).
In this option, the manufacture ID is set unchangeable. Manufacture ID from the input file
would be ignored.
bn, --default-bank=n
Use tone bank n as the default.
Bn, --force-bank=n
Sets the bank number of all channels to n.
in[/m], --default-program=n[/m]
Use the program number as the default instrument. Any Program Change events in MIDI files
will override this option.
If n is followed by /m the default program number of the channel m is specified by n.
In[/m], --force-program=n[/m]
Similar to -Ei but this ignores all program changes.
F args For effects. See below. In args option, you can specify following effect options:
delay=(d|l|r|b)[,msec], --delay=(d|l|r|b)[,msec]
Sets delay type.
d, 0 Disabled delay effect.
l, 1 Left delay.
r, 2 Right delay.
b, 3 Swap left & right.
Optional msec is the delay time.
chorus=(d|n|s)[,level], --chorus=(d|n|s)[,level]
d, 0 Disable this effect.
n, 1 Enable MIDI chorus effect control.
s, 2 Surround sound, chorus detuned to a lesser degree (default).
The optional parameter level specifies the chorus level 0 to 127.
reverb=(d|n|g)[,level], --reverb=(d|n|g)[,level]
reverb=(f|G)[,level,scaleroom,offsetroom,predelay]
--reverb=(f|G)[,level,scaleroom,offsetroom,predelay]
d, 0 Disable MIDI reverb effect control.
n, 1 Enable MIDI reverb effect control. This effect is only available in stereo.
g, 2 Global reverb effect.
f, 3 Freeverb MIDI reverb effect control (default).
G, 4 Global Freeverb effect.
The optional parameter level specifies the reverb level 0 to 127.
For Freeverb effect, additional parameters scaleroom, offsetroom and predelay can be
specified. scaleroom and offsetroom specify variables for the room size calculated
as
roomsize = C * scaleroom + offsetroom
where C is the reverberation character. predelay specifies the factor for pre-delay
time of reverberation in percent. Any of the optional parameters can be omitted.
Default values are 0.28, 0.7 and 100 respectively.
vlpf=(d|c|m), --voice-lpf=(d|c|m)
d, 0 Disable LPF effect.
c, 1 Chamberlin resonant LPF (12dB/oct) (default).
m, 2 Moog resonant low-pass VCF (24dB/oct)
ns=n, --noise-shaping=n
Enable the n th degree noiseshaping filter. The distortion at decay stage is
improved, but the noise on human auditory feeling increases because it shifts to a
high frequency. In case of 8-bit linear encoding, valid values of n are in the
interval from 0 (min) to 4 (max). Default value is 4. In case of 16-bit linear
encoding, valid values of n are in the interval from 0 to 4. According to the
value, it works as following. Default value is 4.
0 No noise shaping.
1 Traditional noise shaping.
2 Overdrive-like soft-clipping + new noise shaping.
3 Tube-amplifier-like soft-clipping + new noise shaping.
4 New noise shaping.
resamp=(d|l|c|L|n|g), --resample=(d|l|c|L|n|g)
d, 0 No interpolation.
l, 1 Linear interpolation.
c, 2 Cubic spline interpolation.
L, 3 Lagrange method.
n, 4 Newton polynomial interpolation.
g, 5 Modified Gauss effect (default).
This option affects the behavior of -N option.
-e, --evil
Make TiMidity++ evil. For the Win32 version, this increases the task priority by one. It can
give better playback when you switch tasks at the expense of slowing all other tasks down.
-F, --[no-]fast-panning
Turns on fast panning to accommodate MIDI pieces that expect panning adjustments to affect notes
that are already playing. Some files that don't expect this have a habit of flipping balance
rapidly between left and right, which can cause severe popping when the -F flag is used.
In the current version of TiMidity++ this option is a toggle.
-f, --[no-]fast-decay
Toggles fast envelopes. This option makes TiMidity++ faster but the release time of the notes are
shortened.
-g sec, --spectrogram=sec
Open the Sound-Spectrogram window. This option is activated if the system has support for the X
Window System.
-H n, --force-keysig=n
Specify the number of key signature. MIDI file is performed with transposition to the key of the
number of sharp (when n is positive) or flat (when n is negative). Valid values of n are in the
interval from -7 to 7. For example, if n is 1, MIDI file with any tonality will be performed
transposing to 1 flat (i.e., F major or D minor). Therefore, it is convenient to use for the
accompaniment when practicing a musical instrument by the tonality which is easy to perform.
-h, --help
Show the help message.
-i mode, --interface=mode
--realtime-priority=n
--sequencer-ports=n
Selects the user interfaces from the compiled-in alternatives. mode must be begun with one of the
supported interface identifiers. Run TiMidity++ with the -h option to see a list.
For ALSA sequencer interface, optionally to use --realtime-priority, set the realtime priority by
n, and to use --sequencer-ports, set the number of opened sequencer ports. Default value is 4.
The following identifiers may be available:
-id dumb interface
-in ncurses interface
-is S-Lang interface
-ia X Athena Widget interface
-ik Tcl/Tk interface
-im Motif interface
-iT vt100 interface
-ie Emacs interface
(use ``M-x timidity'' in Emacs)
-ii skin interface
Environment variable TIMIDITY_SKIN must be set to the path of the skin data (compressed
data are also supported).
-ig GTK+ interface
-ir Launch TiMidity++ as MIDI server.
-iA Launch TiMidity++ as ALSA sequencer client.
-iW Windows synthesizer interface
-iw Windows GUI interface
-iP PortMIDI synthesizer interface
-ip UMP interface
Interface options
Option characters may be added immediately after the interface identifier. The following
options are recognized:
v, --verbose=n
Increases verbosity level. This option is cumulative.
q, --quiet=n
Decreases verbosity level. This option is cumulative.
t, --[no-]trace
Toggles trace mode. In trace mode, TiMidity++ attempts to display its current state
in real time. For the Linux sound driver, this is accomplished through the use of
short DMA buffer fragments, which can be tuned via the -B option.
l, --[no-]loop
Loop playing (some interfaces ignore this option)
r, --[no-]random
Randomize file list arguments before playing
s, --[no-]sort
Sort file list arguments before playing
D, --[no-]background
Daemonize TiMidity++ in background (for alsaseq only)
-j, --[no-]realtime-load
Enable the loading of patch files during play.
-K n, --adjust-key=n
Adjusts key (i.e., transposes the song) by n half tones. Ranges from -24 to 24.
-k msec, --voice-queue=msec
Specify audio queue time limit to reduce voices. If the remaining audio buffer is less than msec
milliseconds, TiMidity++ tries to kill some voices. This feature makes it possible to play
complicated MIDI files on slow CPUs. Setting msec to zero tells TiMidity++ to never remove any
voices.
-L path, --patch-path=path
Adds path to the library path. Patch, configuration, and MIDI files are searched along this path.
Directories added last will be searched first. Note that the current directory is always searched
first before the library path.
-M name, --pcm-file=name
TiMidity++ can play a PCM file instead of a MIDI file. If ``auto'' is specified, TiMidity++ tries
to open foo.mid.wav or foo.mid.aiff when playing foo.mid. If ``none'' is specified, this feature
is disabled. Otherwise just plays name.
-m msec, --decay-time=msec
Modify envelope volume decay time. msec is the minimum number of milliseconds to sustain a
sustained note.
-m0 Disable sustain ramping, causes constant volume sustains (default).
-m1 Effectively behaves as if all sustains are ignored, volume ramping is the same as normal
stage 3.
-m3000 A note at full volume will decay for 3 seconds once it begins to be sustained (assuming the
regular stage 3 rate would not cause it to decay even longer). Softer notes will of course
die sooner.
-N n, --interpolation=n
Sets interpolation parameter. This option depends on the -EFresamp option's value.
cspline, lagrange
Toggles 4-point linear interpolation (default is on).
newton n point interpolation using Newton polynomials. n must be an odd number from 1 to 57.
gauss n+1 point modified Gauss interpolation. Ranges 0 (disable) to 34 (max), default to 25.
In either way, linear interpolation is used if audio queue < 99%.
-O mode, --output-mode=mode
--flac-verify
--flac-padding=n
--flac-complevel=n
--oggflac
--speex-quality=n
--speex-vbr
--speex-abr=n
--speex-vad
--speex-dtx
--speex-complexity=n
--speex-nframes=n
Selects the output mode from the compiled-in alternatives. mode must begin with one of the
supported output mode identifiers. Run TiMidity++ with the -h option to see the list.
Special in Ogg FLAC output mode, verifying generated data (will be a bit slower), the size of
header padding (default is 4096), the compression level (0 to 8) (default is 5), and enabling
OggFLAC stream can be specified by --flac-verify, --flac-padding, --flac-complevel and --oggflac
options respectively.
Special in Ogg Speex output mode, the compression quality (0 to 10) (default is 8), Enabling VBR
output, enabling ABR output and setting the ratio to n, enabling VAD (voice activity detection),
enabling DTX (discontinuous transmission), the encoding complexity (0 to 10) (default is 3), and
frames in a single Ogg packet (0 to 10) (default is 1) can be specified by --speex-quality,
--speex-vbr, --speex-abr, --speex-vad, --speex-dtx, --speex-complexity and --speex-nframes options
respectively.
The following identifiers are available in all versions:
-Od Outputs via audio device (default)
-Os Output to ALSA
-Or Generate raw waveform data. All format options are supported. Common formats include:
-OrU u-Law
-Or1sl 16-bit signed linear PCM
-Or8ul 8-bit unsigned linear PCM
-Ou Generate Sun Audio (au) data
-Oa Generate AIFF data
-Ow Generate RIFF WAVE format output. If output is directed to a non-seekable file, or if
TiMidity++ is interrupted before closing the file, the file header will contain 0xffffffff
in the RIFF and data block length fields. The popular sound conversion utility sox is able
to read such malformed files, so you can pipe data directly to sox for on-the-fly
conversion to other formats.
-Ol List MIDI events
-OM MOD -> MIDI conversion
-Oe EsounD
-Op PortAudio
-Oj JACK
-OR aRts
-OA Alib
-Ov Ogg Vorbis
-OF Ogg FLAC
-OS Ogg Speex
-OO libdao
Format options
Option characters may be added immediately after the mode identifier to change the output
format. The following options are recognized:
S, --output-stereo
Stereo
M, --output-mono
Monophonic
s, --output-signed
Signed output
u, --output-unsigned
Unsigned output
1, --output-16bit
16-bit sample width
2, --output-24bit
24-bit sample width
8, --output-8bit
8-bit sample width
l, --output-linear
Linear encoding
U, --output-ulaw
u-Law (8-bit) encoding
A, --output-alaw
A-Law encoding
x, --[no-]output-swab
Byte-swapped output
Note that some options have no effect on some modes. For example, you cannot generate a
byte-swapped RIFF WAVE file, or force uLaw output on a Linux PCM device.
-o file, --output-file=file
Place output on file, which may be a file, device, or HP-UX audio server, depending on the output
mode selected with the -O option. The special filename `-' causes output to be placed on stdout.
-P file, --patch-file=file
Use patch file for all programs.
-p [n](a)
--polyphony=n
--[no-]polyphony-reduction
Sets polyphony (maximum number of simultaneous voices) to n.
Optionally to put `a' character along with -p option, or to use --polyphony-reduction, instructs
TiMidity++ to enable automatic polyphony reduction algorithm.
-Q n[,...](t)
--mute=n[,...]
--temper-mute=n[,...]
Cause channel n to be quiet. n can carry out package specification by `,'. If n is 0, all
channels are turned off. Continuously, specifying -n, channel n is turned back on.
On the other hand, to put `t' character after -Q option or to use --temper-mute describes
temperament mute. This mutes channels of specific temperament type n. For preset temperament, n
can range 0 to 3. For user-defined temperament, n can range 4 to 7.
-q sec/n, --audio-buffer=sec/n
Specify audio buffer in seconds. sec maximum size of buffer, n percentage filled at the beginning
(default is 5.0/100) (size of 100% equals the whole device buffer size).
-R msec
Enables Pseudo Reverb Mode. It sets every instrument's release to msec ms. If msec is 0, msec is
set to 800 (default).
-S n, --cache-size=n
Sets the re-sample cache size to n bytes. If n equals 0 any sample caches are disabled. The
default value of n is 2097152 (2MB).
-s freq, --sampling-freq=freq
Sets the resampling frequency (Hz or kHz). Not all sound devices are capable of all frequencies
-- an approximate frequency may be selected, depending on the implementation.
-T n, --adjust-tempo=n
Adjust tempo to n%; 120 play MOD files with an NTSC Amiga's timing.
-t code, --output-charset=code
Sets output coding of Japanese text. Possible values of code are:
auto determined by the LANG environment variable.
ascii Translates non-ASCII code to period.
nocnv No conversion.
1251 Convert from windows-1251 to koi8-r.
euc Outputs EUC (Japan) coding.
jis Outputs JIS coding.
sjis Outputs SJIS coding.
-U, --[no-]unload-instruments
Unload all instruments from memory between MIDI files. This can reduce memory requirements when
playing many files in succession.
-V power, --volume-curve=power
Set the power of volume curve. The total amplification becomes volume^power. 0 (default) uses
the regular tables. Any non-zero value causes all midi to use the new user defined
velocity/volume/expression curve (linear: 1, ideal: ~1.661, GS: ~2).
-v, --version
Show the version string
-W mode, --wrd=mode
Play WRD file.
Allowed values of mode are:
x X Window System mode
w Windows console mode
t TTY mode
d Dumb mode (outputs WRD events directory)
- do not trace WRD
R[opts]
Sets WRD options:
a1=b1,a2=b2,...
Sets the WRD options. an is the name of option and bn is the value.
d=n Emulates timing (@WAIT, @WMODE) bugs of the original MIMPI player. The emulation
levels are:
-WRd=0 do not emulate any bugs of MIMPI
-WRd=1 only emulate some bugs (default)
-WRd=2 emulate all known bugs
F=file Use file as WRD file only no file matching *.wrd is found.
f=file Uses file as WRD file.
WRD mode must also use trace mode (option -i?t) or the timing of the WRD events will be terrible.
-w mode, --rcpcv-dll=mode
Extended mode for MS Windows. The following options are available:
-w r Use rcpcv.dll to play RCP/R36 files.
-w R Do not use rcpcv.dll (default).
-x str, --config-string=str
Configure TiMidity++ with str. The format of str is the same as timidity.cfg.
For example:
-x'bank 0\n0 violin.pat'
Sets the instrument number 0 to violin.
Character `\' (Ascii 0x5c) in the str is treated as escape character like in C literals. For
example \n is treated as carriage return.
-Z file, --freq-table=file
Cause the table of frequencies to be read from file. This is useful to define a tuning different
from 12-equal temperament. If ``pure'' is specified, TiMidity++ plays in trial pure intonation.
-Zpure[n(m)], --pure-intonation=[n(m)]
Play in trial pure intonation by Key Signature meta-event in the MIDI file. You can
specify the initial keysig by hand, in case the MIDI file does not contains the meta-event.
Optionally, n is the number of key signature. In case of sharp, n is positive. In case of
flat, n is negative. Valid values of n are in the interval from -7 to 7. In case of minor
mode, you should put `m' character along with -Zpure option.
--module=n
Simulate behavior of specific synthesizer module as much as possible. For the moment, the value
of n defined is as follows:
0 TiMidity++ Default
1 Roland SC-55
2 Roland SC-88
3 Roland SC-88Pro
4 Roland SC-8850
5-15 Reserved for GS family
16 YAMAHA MU-50
17 YAMAHA MU-80
18 YAMAHA MU-90
19 YAMAHA MU-100
20-31 Reserved for XG family
32 SoundBlaster Live!
33 SoundBlaster Audigy
34-111 Reserved for other synthesizer modules
112 TiMidity++ Special 1
113-126
Reserved for TiMidity++ specification purposes
127 TiMidity++ Debug
SEE ALSO
sf2text(1), timidity.cfg(5)
COPYRIGHT
Copyright (C) 1999-2004 Masanao Izumo <iz@onicos.co.jp>
Copyright (C) 1995 Tuukka Toivonen <tt@cgs.fi>
The original version was developed by Tuukka Toivonen <tt@cgs.fi> until the release of TiMidity-0.2i.
His development was discontinued because of his being busy with work.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
AVAILABILITY
The latest release is available on the TiMidity++ Page,
URL http://www.timidity.jp/
BUGS
Eats more CPU time than a small CPU-time-eating animal.
This man page was translated from Japanese to English by me with poor English skill :-)
AUTHORS
Version 0.2i and earlier:
Tuukka Toivonen <tt@cgs.fi>
Vincent Pagel <pagel@loria.fr>
Takashi Iwai <tiwai@suse.de>
Davide Moretti <dave@rimini.com>
Chi Ming HUNG <cmhung@insti.physics.sunysb.edu>
Riccardo Facchetti <riccardo@cdc8g5.cdc.polimi.it>
TiMidity++:
IZUMO Masanao <iz@onicos.co.jp>
HARADA Tomokazu <harada@prince.pe.u-tokyo.ac.jp>
YAMATE Keiichirou <keiich-y@is.aist-nara.ac.jp>
KIRYU Masaki <mkiryu@usa.net>
AOKI Daisuke <dai@y7.net>
MATSUMOTO Shoji <shom@i.h.kyoto-u.ac.jp>
KOYANAGI Masaaki <koyanagi@okilab.oki.co.jp>
IMAI Kunihiko <imai@leo.ec.t.kanazawa-u.ac.jp>
NOGAMI Takaya <t-nogami@happy.email.ne.jp>
WATANABE Takanori <takawata@shidahara1.planet.kobe-u.ac.jp>
TAKEKAWA Hiroshi <sian@big.or.jp>
NAGANO Daisuke <breeze.nagano@nifty.ne.jp>
KINOSHITA kosuke <kino@krhm.jvc-victor.co.jp>
SHIGEMURA Norikatsu <nork@ninth-nine.com>
YAMAHATA Isaku <yamahata@kusm.kyoto-u.ac.jp>
ARAI Yoshishige <ryo2@on.rim.or.jp>
Glenn Trigg <ggt@netspace.net.au>
Tim Allen <thristian@usa.net>
Michael Haardt <michael@moria.de>
Eric A. Welsh <ewelsh@ccb.wustl.edu>
Paolo Bonzini <bonzini@gnu.org>
KIMOTO Masahiko <kimoto@ohnolab.org>
IWAI Takashi <tiwai@suse.de>
Saito <saito2@digitalme.com>
SATO Kentaro <kentaro@ps.catv.ne.jp>
TAMUKI Shoichi <tamuki@linet.gr.jp>
URABE Shohei <root@mput.dip.jp>
SUENAGA Keishi <s_keishi@mutt.freemail.ne.jp>
SUZUKI Koji <k@kekyo.net>
(titles omitted and an order different)
and other many people sends information and bug-fix codes.
The English version of this man page was written by NAGANO Daisuke <breeze.nagano@nifty.ne.jp>.
Now, TAMUKI Shoichi <tamuki@linet.gr.jp> and URABE Shohei <root@mput.dip.jp> are maintaining the man
page.
If you have any comments or suggestions or complaints :) about this man page, please tell us it.